MSZ KGST 2663-1980 《A和B准度的六边矮螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4629-2006 Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings Stock De or = to 300 mm Edition P 1《航空航天系列.钢FE-PM 3504(X4CrNiMo16-.pdf

AECMA PREN 4630-2006 Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings De less than or equal to 200 mm 900 MPa less than or equal to Rm l.pdf

AECMA PREN 4631-2006 Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Bar De less than or equal to 200 mm 900 MPa less than or equal to Rm less t.pdf

AECMA PREN 4632-001-2007 Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 001 General requirements Edition P.pdf

AECMA PREN 4632-002-2007 Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 002 Homogeneous assemblies alumini.pdf

AECMA PREN 4632-003-2008 Aerospace series Weldability and brazeability of materials in aerospace constructions Part 003 Homogeneous assemblies of unalloyed and low alloy steels Edi.pdf

AECMA PREN 4632-005-2009 Aerospace series Weldability and brazeability of materials in aerospace constructions Part 005 Welding and brazing of homogenous assemblies of heat resisti.pdf

AECMA PREN 4636-2008 Aerospace series Screws 100 countersunk head six lobe recess short thread in titanium alloy TI-P64001 with aluminium pigmented coating Classification 1 100 MPa.pdf

AECMA PREN 4637-2008 Aerospace series Blast media White corundum Edition P 1《航空航天系列.喷丸白刚玉第P1版》.pdf