MSZ KGST 710-1977 《高度测量表主要尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSE-M2A151-A3-2003 ALUMINUM ALLOY CASTING THERMALLY TREATED CONDITION TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M2A151-A2)《热处理条件用铝合金铸件 与标准FORD WSS-M99P1111-A一起使用 列.pdf

FORD WSE-M2A151-A4-2003 ALUMINUM ALLOY CASTING THERMALLY TREATED CONDITION TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M2A151-A2)《热处理条件用铝合金铸件 与标准FORD WSS-M99P1111-A一起使用 列.pdf

FORD WSE-M2A154-A1-2014 ALUMINUM ALLOY CASTING THERMALLY TREATED CONDITION TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSE-M2A159-A1-2010 ALUMINUM ALLOY COLD FORMED HEAT TREATED TO BE USED WITH FORD WSS-M99P1111-A 《热处理冷成型铝合金 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2C903-A1-2009 OIL ENGINE ILSAC GF-1 INITIAL FILL SAE 5W-30 TO BE USED WITH FORD WSS-M99P1111-A 《SAE 5W-30初始注入型LSAC GF-1发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2C903-A2-2009 OIL ENGINE ILSAC GF-1 INITIAL FILL SAE 10W-30 TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M2C903-A1)《SAE 10W-30初始注入型LSAC GF-1发动机油 与标准FORD WSS-.pdf

FORD WSE-M2C906-A-2009 OIL ENGINE API SG CF-4 SAE 15W-40 INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入和使用中注入的SAE 15W-40、 API SG CF型发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2C906-B-2009 OIL ENGINE API CG-4 SH SAE 15W-40 INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的API CG-4 SH、SAE 15W-40发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2C907-A-2009 OIL ENGINE API SG SAE 50 ASSEMBLY FLUID TO BE USED WITH FORD WSS-M99P1111-A 《装配用API SG、SAE 50发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf