MSZ MI 19383-1977 《水中镭的检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 14677-1983 Sheet stamping dies Plates-blanks for dies with four guide assemblies Design and dimensions《薄板冲压模 具有四套引导装置的模具板坯 设计和尺寸规格》.pdf

GOST 14678-1983 Sheet stamping dies Retainers for guide ball assemblies Design and dimensions《滚珠导向装置用防护套 结构及尺寸》.pdf

GOST 1468-1990 Cadmium anodes Specifications《镉阳极 技术条件》.pdf

GOST 14686-1969 Means of measurements for luminous quantities Terms《测量光学量值的器具 术语》.pdf

GOST 14691-1969 Control devices for automatic regulation systems Terms《自动调节系统的控制装置 术语》.pdf

GOST 14693-1990 Unsealed metal-enclosed switchgear and controlgear for voltages up to 10 kV General specifications《电压10 kV及以下的非密封铁壳开关装置和控制装置 通用规范》.pdf

GOST 14694-1976 Metal-clad switchgears up to 10 kV Test methods《电压10 kV及以下的铠装开关装置 测试方法》.pdf

GOST 14695-1980 Enclosed transformer substations of output from 25 to 2500 kV·A for voltages up to 10 kV inclusive General specifications《电压10 kV及以下 输出功率25-2500 kV·A的封闭式变电站 通用规范》.pdf

GOST 14700-1969 Carbide tipped blades for double- and three-side disk cutters Construction and dimensions《两面刃和三面刃圆盘铣刀用镶硬质合金刀片 结构及尺寸》.pdf