江西专用2019中考物理新设计一轮复习第三章在光的世界里第1讲习题2019021421.doc

上传人:fuellot230 文档编号:959063 上传时间:2019-03-09 格式:DOC 页数:2 大小:761.50KB
下载 相关 举报
江西专用2019中考物理新设计一轮复习第三章在光的世界里第1讲习题2019021421.doc_第1页
第1页 / 共2页
江西专用2019中考物理新设计一轮复习第三章在光的世界里第1讲习题2019021421.doc_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、1第一部分 第三章 第 1 讲命题点 1 光现象的辨识1(2012江西 11 题 3 分)如图所示,下列成语与其物理知识相符的是( D )A凿壁偷光光的折射B井底之蛙光的反射C猴子捞月光的折射D杯弓蛇影光的反射命题点 2 光的反射2(2016江西 2 题 2 分)如图所示,是探究光的反射规律的实验装置通过实验归纳得到的结论是:(1)反射光线、入射光线和法线在同一平面内;(2)反射光线、入射光线分别位于法线两侧;(3)_ _ _,这就是光的反射定律命题点 3 光的折射3(2015江西 9 题 2 分)如图所示,是光在空气和玻璃之间发生折射的光路图,从图中可以看出,空气在界面的_左_(选填“左”或

2、“右”)侧,此过程中还有部分光发生了反射,反射角的大小是_60_.命题点 4 平面镜成像的特点4(2017江西 13 题 3 分)如图乙所示,是小安同学自制的潜望镜,利用它能在隐蔽处观察到外面的情况,用它正对如图甲所示的光源“F” ,则所观察到的像是( B )25 【2014江西 23(1)题 2 分】完成下面的探究性实验:探究平面镜成像时像与物的关系玲玲同学进行该实验时,选择两根完全相同的蜡烛、一块较厚的玻璃板 M(P、 Q 两个面都可以作为平面镜使用)【进行实验与收集证据】她在桌面上铺一张大纸,竖立一块玻璃板;将蜡烛 A 放置在玻璃板的前面,点燃蜡烛A,然后将蜡烛 B 放置在玻璃板后面,如图甲所示,进行实验玲玲按照图乙中的测量方法,多次改变蜡烛 A 的位置,认真测量并记录了对应的数据:实验序号 1 2 3 4物距 /cm 4.2 5.0 6.8 10.0像距 /cm 3.7 4.5 6.3 9.5【分析与论证】根据上述实验数据分析得出:像距小于物距【交流与评估】这个结论与平面镜成像特点不相符,主要是选择的蜡烛 A 所成的像到反射面的距离_不正确_(选填“正确”或“不正确”);根据上面数据推算玻璃板的厚度为_0.5_cm.

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 16903-2015 en Petroleum and natural gas industries - Characteristics of LNG influencing the design and material selection《石油和天然气 液化天然气的特征 影响该设计和材料选择(ISO 16903 2015)》.pdf EN ISO 16903-2015 en Petroleum and natural gas industries - Characteristics of LNG influencing the design and material selection《石油和天然气 液化天然气的特征 影响该设计和材料选择(ISO 16903 2015)》.pdf
  • EN ISO 16904-2016 en Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals《石油和天然气工业和液化天然气海上运送武器 传统的陆上终端的测试设计(ISO .pdf EN ISO 16904-2016 en Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals《石油和天然气工业和液化天然气海上运送武器 传统的陆上终端的测试设计(ISO .pdf
  • EN ISO 16911-1-2013 en Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1 Manual reference method《固定源排放 手动和自动检测速度和管.pdf EN ISO 16911-1-2013 en Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1 Manual reference method《固定源排放 手动和自动检测速度和管.pdf
  • EN ISO 16911-2-2013 en Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2 Automated measuring systems《固定污染源排放 通风管速率.pdf EN ISO 16911-2-2013 en Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2 Automated measuring systems《固定污染源排放 通风管速率.pdf
  • EN ISO 16925-2014 en Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting《涂料和清漆 涂料抗加压水冲的测试(ISO 16925 2014)》.pdf EN ISO 16925-2014 en Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting《涂料和清漆 涂料抗加压水冲的测试(ISO 16925 2014)》.pdf
  • EN ISO 16927-2014 en Paints and varnishes - Determination of the overcoatability and recoatability of a coating《涂料和清漆 涂料再涂性和重涂性的测定(ISO 16927 2014)》.pdf EN ISO 16927-2014 en Paints and varnishes - Determination of the overcoatability and recoatability of a coating《涂料和清漆 涂料再涂性和重涂性的测定(ISO 16927 2014)》.pdf
  • EN ISO 16931-2009 en Animal and vegetable fats and oils - Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC)《动植物脂肪和油 采用高效凝胶排阻层析.pdf EN ISO 16931-2009 en Animal and vegetable fats and oils - Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC)《动植物脂肪和油 采用高效凝胶排阻层析.pdf
  • EN ISO 16946-2017 en Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block《无损检测超声检测-阶梯楔块校准块规范(ISO 16946 2017)》.pdf EN ISO 16946-2017 en Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block《无损检测超声检测-阶梯楔块校准块规范(ISO 16946 2017)》.pdf
  • EN ISO 16948-2015 en Solid biofuels - Determination of total content of carbon hydrogen and nitrogen《固体生物燃料 碳 氢和氮总含量的测定(ISO 16948 2015)》.pdf EN ISO 16948-2015 en Solid biofuels - Determination of total content of carbon hydrogen and nitrogen《固体生物燃料 碳 氢和氮总含量的测定(ISO 16948 2015)》.pdf
  • 相关搜索

    当前位置:首页 > 考试资料 > 中学考试

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1