1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. DECEMBER 2015 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPEC
2、IFICATION) NUMBER: CEMS A-41 Srr TITLE: Flame and Induction Hardened Steel and Iron Parts CURRENT REV. No.: 1512 DATE: Dec. 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVI
3、SION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regula
4、tory limits prior to use. Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS A-41 For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards.
5、Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. DECEMBER 2015 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS A-41 APPX Srr TITLE: Flame and Induction Hardened Steel and Iron Parts CURRENT REV. No.: 1512 DATE: Dec. 2015 WRITTE
6、N/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all
7、of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS A-41 For questions, contact MaterialsEngineeringN VOID
