1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2016 by Navistar, Inc. APRIL 2016 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFI
2、CATION) NUMBER: CEMS AT-2 TITLE: Determination Of Austenite Grain Size By Thermal Etching CURRENT REV. No.: 1604 DATE: Apr. 2016 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. 0110 October 2001 Year PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CU
3、RRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS AT-2 For questions, contact MaterialsEngineeringN VOID
