1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. OCTOBER 2014 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECI
2、FICATION) NUMBER: CEMS-DT-Index TITLE: Index of DT Test Methods CURRENT ISSUE DATE: October 2014 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: June 2013 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may i
3、nvolve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Cha
4、nge Notice: CEMS DT-9 made VOID. Index of DT Test Methods Spec Number TITLE DATE Author CEMS-DT-2 Flame Resistance Test October 2001 Materials Engineering CEMS-DT-3 Methods of Determining Glass and PTFE in Thermoplastic Urethane October 2001 Materials Engineering CEMS-DT-4 Impact Test For Plastics A
5、pril 2010 Materials Engineering CEMS-DT-8 Glass Content of Reinforced Plastics December 2004 Materials Engineering CEMS-DT-10 Rubbing Wear Test for Interior Components October 2001 Materials Engineering CEMS-DT-11 Heat Stability of Thermoplastic Trim Materials October 2001 Materials Engineering CEMS
6、DT-12 Colorfastness to Cleaning and Chemicals June 2013 Materials Engineering CEMS-DT-14 Surface Waviness Definition via ALSA Analyzer April 2009 Materials Engineering CEMS-DT-15 Test for Hose Insertion Force Feb. 2013 Materials Engineering CEMS-DT-16 Test for Scratch Resistance April 2013 Material
7、s Engineering CEMS-DT-17 Torque To Seal Test For Hydraulic Brake Lines June 2013 Materials Engineering OBSOLETE DT Test Methods Spec Number TITLE Replaced by: CEMS-DT-1 Low Temperature Brittleness of Elastomers ASTM D2137 Method A CEMS-DT-5 Flammability of Materials FMVSS 302; SAE J369 CEMS-DT-6 Fluid Immersion Properties of O-Rings ASTM D1414 & ASTM D471 CEMS-DT-7 Method for Determining Hardness of Seal Materials ASTM D1415 CEMS-DT-9 Cold Leak Test of Hose Assemblies MPAPS DT-9 CEMS-DT-13 Acoustic Decoupler, Bulk Stiffness No replacement.
