1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. APRIL 2015 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFI
2、CATION) NUMBER: CEMS G-19, Part III TITLE: Nickel-Nickel/Chromium-Chromium Plating Coatings for International Standard Parts CURRENT ISSUE DATE: April 2015 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: April 2002 PRINTED COPIES OF THIS DOCUMENT MU
3、ST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determ
4、ine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS G-19 Pt III. For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permissi
5、on from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. APRIL 2015 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS G-19, PART I, II, & III APPX TITLE: Nickel Nickel/Chromium Chromium Plating - Ap
6、pendix CURRENT ISSUE DATE: April 2015 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: April 2002 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. Thi
7、s specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID. Refer to MPAPS G-19 Pt I, II or III for information. For questions, contact MaterialsEngineeringN VOID
