NAVISTAR MPAPS S-A-2 001-2015 Index Numbering System Introduction.pdf

上传人:赵齐羽 文档编号:963104 上传时间:2019-03-10 格式:PDF 页数:2 大小:83.55KB
下载 相关 举报
NAVISTAR MPAPS S-A-2 001-2015 Index Numbering System Introduction.pdf_第1页
第1页 / 共2页
NAVISTAR MPAPS S-A-2 001-2015 Index Numbering System Introduction.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (

2、MPAPS) NUMBER: MPAPS S-A-2.001 Former Designation: ESP-A-2.001 TITLE: Index Numbering System Introduction CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-A-2.001 - September 2000 PRINTED COPIES OF THIS DOCUMENT MUST BE

3、 VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine t

4、he applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. The indexes in this book are written per the left-justified, as entered, alphanumeric numbering system. This system sorts each individual letter or digit from left to right, first for alpha (A, B, C, etc.

5、) characters and then for numeric (0, 1, 2, 3, etc.) entries. The following is a sample alphanumeric index along with specific sorting explanations: NUMBER: MPAPS S-A-2.001 TITLE: Index Numbering System Introduction REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc

6、 or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 2 of 2 TECHNICAL INFORMATION: For further information related to the technical content of this specification, contact: Suppliers may pur

7、chase controlled copies of this specification by contacting: Materials Engineering and Technology Dept. 10400 W. North Avenue Melrose Park, IL 60160 E-mail: MaterialsEngineeringN IHS Global Inc. 15 Inverness Way East Englewood CO 80112-5776 Phone: 1-800-854-7179 E-mail: AutomotiveIHS.com Website: http:/

展开阅读全文
相关资源
猜你喜欢
  • EN 13409-2002 en Methods of Test for Hydraulic Setting Floor Smoothing and or Levelling Compounds - Determination of Setting Time《水压调整地面平滑和 或调平用复合物的试验法 调整时间测定》.pdf EN 13409-2002 en Methods of Test for Hydraulic Setting Floor Smoothing and or Levelling Compounds - Determination of Setting Time《水压调整地面平滑和 或调平用复合物的试验法 调整时间测定》.pdf
  • EN 1341-2012 en Slabs of natural stone for external paving - Requirements and test methods《天然石材板外部铺平道路 要求和测试方法》.pdf EN 1341-2012 en Slabs of natural stone for external paving - Requirements and test methods《天然石材板外部铺平道路 要求和测试方法》.pdf
  • EN 13410-2001 en Gas-Fired Overhead Radiant Heaters - Ventilation Requirements for Non-Domestic Premises (Incorporating Corrigendum July 2002)《燃气顶部辐射加热器 非家用房屋的通风要求 合并勘误表-2002年7月》.pdf EN 13410-2001 en Gas-Fired Overhead Radiant Heaters - Ventilation Requirements for Non-Domestic Premises (Incorporating Corrigendum July 2002)《燃气顶部辐射加热器 非家用房屋的通风要求 合并勘误表-2002年7月》.pdf
  • EN 13411-1-2002 en Terminations for steel wire ropes - Safety - Part 1 Thimbles for steel wire rope slings (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第1部分 钢丝绳吊索用穿线环 合并勘误表A1-2008》.pdf EN 13411-1-2002 en Terminations for steel wire ropes - Safety - Part 1 Thimbles for steel wire rope slings (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第1部分 钢丝绳吊索用穿线环 合并勘误表A1-2008》.pdf
  • EN 13411-2-2001 en Terminations for steel wire ropes - Safety - Part 2 Splicing of eyes for wire rope slings (Incorporates Amendment A1 2008)《钢丝绳接线端的安全性 第2部分 钢丝绳吊索眼拼接 包含修改件A1-2008》.pdf EN 13411-2-2001 en Terminations for steel wire ropes - Safety - Part 2 Splicing of eyes for wire rope slings (Incorporates Amendment A1 2008)《钢丝绳接线端的安全性 第2部分 钢丝绳吊索眼拼接 包含修改件A1-2008》.pdf
  • EN 13411-3-2004 en Terminations for steel wire ropes - Safety - Part 3 Ferrules and ferrule-securing (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第3部分 金属箍加固环 包含修改件A1-2008》.pdf EN 13411-3-2004 en Terminations for steel wire ropes - Safety - Part 3 Ferrules and ferrule-securing (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第3部分 金属箍加固环 包含修改件A1-2008》.pdf
  • EN 13411-4-2011 en Terminations for steel wire ropes - Safety - Part 4 Metal and resin socketing《钢丝绳接线端 安全性 第4部分 金属和树脂套接》.pdf EN 13411-4-2011 en Terminations for steel wire ropes - Safety - Part 4 Metal and resin socketing《钢丝绳接线端 安全性 第4部分 金属和树脂套接》.pdf
  • EN 13411-5-2003 en Terminations for steel wire ropes - Safety - Part 5 U-bolt wire rope grips (Incorporates Amendment A1 2008)《钢丝绳接线端的安全性 第5部分 U形钢丝绳夹 包含修改件 A1-2008》.pdf EN 13411-5-2003 en Terminations for steel wire ropes - Safety - Part 5 U-bolt wire rope grips (Incorporates Amendment A1 2008)《钢丝绳接线端的安全性 第5部分 U形钢丝绳夹 包含修改件 A1-2008》.pdf
  • EN 13411-6-2004 en Terminations for steel wire ropes - Safety - Part 6 Asymmetric wedge socket (Incorporates Amendment A1 2008)《钢丝绳接线端 安全 第6部分 非对称楔形连接套筒 包含修改件A1-2008》.pdf EN 13411-6-2004 en Terminations for steel wire ropes - Safety - Part 6 Asymmetric wedge socket (Incorporates Amendment A1 2008)《钢丝绳接线端 安全 第6部分 非对称楔形连接套筒 包含修改件A1-2008》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1