1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-C-0.0 Former Designation: ESP-C-0.0 TITLE: Table of Contents Section C Screws English Series CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-C-0.0 - January 2001 PRINTED COPIES OF THIS DOCUMENT M
3、UST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to deter
4、mine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Machine Screws English Series MPAPS S-C-1.101-GS/PL Machine Screws and Lock Washing Assemblies with Tooth or Spring Lock Washing - English Series MPAPS S-C-10.101-GS/PL Hexagon Socket Head Cap screw
5、s - English Series MPAPS S-C-28.101-GS/PL Flanged 12-Point Screws - English Series MPAPS S-C-29.101-GS/PL Headless Hex Socket Set Screws - English Series MPAPS S-C-32.101-GS/PL Square Head Set Screws - English Series MPAPS S-C-34.101-GS/PL Penetration Gages and Gaging for Cross Recess Machine Screws - General Specifications - English Series MPAPS S-C-90.101-GS/PL
