1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-L-0.0 Former Designation: ESP-L-0.0 TITLE: Table of Contents Section L Tube and Lubrication Fittings English Series CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-L-0.0 - October 2001 PRINTED CO
3、PIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health
4、 practices and to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Automotive Tube Fittings - (Noun Code - 3300) English Series MPAPS S-L-1.101-GS/PL Hydraulic Tube Fitting - 37 Flared Tube Components and Flareless Tube Components (Noun Code
5、- 3300) English Series MPAPS S-L-7.101-GS/PL Spherical Sleeve (Compression) Tube Fittings - Noun Code - 3300) English Series MPAPS S-L-9.101-GS/PL Lubrication Fittings - (Noun Code - 3300) English Series MPAPS S-L-21.101-GS/PL Drain and Shut-Off Cocks - (Noun Code - 9620) English Series MPAPS S-L-61.101-GS/PL