1、 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. OCTOBER 2015 Page 1 of 1 NAVISTAR, INC. TMS (TRUCK MATERIAL SPECIFICATION) NUMBER
2、 TMS-7116 srr TITLE: Injection Molded Interior Trim Materials CURRENT REV. No.: 1510 DATE: Oct. 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. J - June 2005 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification ma
3、y involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS D-7116. For questions, contact MaterialsEngineeringN VOID
