1、 This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. Ge32001 International Truck and Engine Corporation For Further information C
2、ontact: Materials Engineering Truck Development and Technology Center 2911 Meyer Rd., Post Office Box 1109, Ft. Wayne, Indiana 46801-1109 Email: MaterialsEngineeringNav-I. AUGUST 2001 Page 1 of 1 INTERNATIONAL TRUCK AND ENGINE CORPORATION TMS (TRUCK MATERIAL SPECIFICATION) NUMBER: TMS-9500 TITLE: Ma
3、gnaglo Inspection Steering Knuckles REVISION: C-1 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering DATE VOIDED: September 1983 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedure
4、s. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: VOID Reference: File 02-2 Keywords: Magnaglo Inspection; Steering Knuckles This specification is no longer used in International Truck facilities. V O I D
