1、A-A-5037LI LI 7779774 001234LI 7 W INCH-POUND A-A-50374 11 December 1989 COMMERCIAL ITEM DESCRIPTION BAG, FIREMANS, UTILITY 1. SALIENT CHARACTERISTICS 1.1 Desien and construction. 1.1.1 Body. The body shall be constructed from fire, water, weather, and mildew resistant cotton duck cloth. The fabric
2、shall have a minimum weight of 10 ounces per square yard and conform to CCC-C-419 except the color shall be natural, and shall have a finish conforming to class II of CCC-C-428. In addition, the cloth shall be treated with commercial fungicide 2,2 methylene-bis-(4-chlorophenol) also known as G-4. 1.
3、1.2 Handle or carrying strap. The handle or carrying strap shall be fabricated from nylon webbing. The width shall be 2 inches with a thickness of .035-.O50 inches (see figures 1 and 2). The weight shall be 1.25 ounces per linear yard with a minimum breaking strength of 1500 pounds. The color shall
4、be Olive Green. 1.1.3 Thread. The thread shall be nylon of sufficient size and strength for the intended applications. The thread shall show good fastness to weathering. The color shall be Olive Green. 1.1.4 Size and dimensions. (see figures 3 and 4) Characteristic A. Height B. Width C. Depth Dimens
5、ions (inches) 21 1/2 23 1/2 11 1/2 Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Officer in Charge, Navy Clothing and Textile Research Facility, 21 Stratlimore Road, Natick, MA 01760-2490 by u
6、sing the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or bv letter. AMSC N/A FSC 8460 DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited. Licensed by Information Handling ServicesProvided by IHSNot for
7、 ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50374 1.1.4.1 Dimensional tolerances. Unless otherwise specified the dimensional tolerances shall be as follows: Less than 2 inches- +1/16 10 inches or more but less than 30 inches- +1/4 30 inches or more but less than 6
8、0 inches- - +3/8 2 inches or more but less than 10 inches- C1/8 - 60 inches or more- - +1/2 1.1.5 Snap fasteners. There shall be seven metal snap fasteners evenly spaced along the protective flap as shown in figures 5 and 6, The fasteners shall be black and finished to prevent corrosion and shall be
9、 of adequate strength and design to function properly over the life of the end item. 1.1.6 Slide fastener. The slide fastener shall run the length of the top of the bag. The slide fastener shall be medium heavy, brass, nonseparating, nonreversable type with closed stops at each end and a wire stirru
10、p pull (see figure 5). All components of the slide fastener shall be Olive Green, except the brass chain and stops shall have a natural finish. 1.1.6.1 Slide fastener tape. with 1 l/h inch tape extension. The slide fastener tape shall be 3/4 inch wide The color shall be Olive Green. 1.1.6.2 Thon A t
11、hong shall be tied to the wire stirrup pull (see figure 5). tying to wire stirrup pull. The -i? t ong shall be 3/8 inch nylon webbing and 17 inches long before The color shall be Olive Green. 1.1.7 Protective flap. The protective flap shall extend past the length of the slideastener. The flap dimens
12、ions shall be 36 1/4 inches long and 5 1/8 inches wide (see figure 6). 1.1.7.1 Bindin . Binding tape shall be placed around edge of protective flap and shal + e made of 3/4 to 1 inch nylon textile tape and applied as shown in figure 6. The 1.2 Fi ures. of this -$. ag 1.3 Label. p r in t edo t h prov
13、ided. _ color shall be Olive Green. Figures 1 through 6 are provided for guidance in construction A commercial type label is acceptable provided additional labels containing the information in 1.3.1 and 1.3.2 are 1.3.1 Contract number and NSN. The bag shall have a label containing the contract numbe
14、r and NSN caught in the seam connecting the top and side pieces - on the inside of the bag. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50374 type V, class 1, size 2; or type VIII, fabricated from wood groups I, II, III or IV, grade A of NN
15、-P-71, or 4-way, style 1, size A, type I, class 1 fabricated from groups specified of MIL-P-15011. Interlocking of loads shall be effected by reversing the pattern of each course. If the container is of a size which does not conform to any of the patterns specifies in MIL-STD-147, the pallet pattern
16、 used shall first be approved by the contacting officer. Approximate dimensions are furnished as a guide only. 4. NOTES 4.1 Intended use. and carrying firefighters suits and miscellaneous fire fighting equipment. 4.2 Acquisition requirements. The acquisition document shall specify the following: The
17、 firemans utility bag is designed for use for storing (a) Title and date of this document. (b) When palletization is required (see 3.4). 4.3 Fabric supplier. of the fabric needed for this bag. The following company can be contacted for acquisition Excello Fabric Finishers, Inc. P.O. Box 711 802 Sout
18、h Second Street Coshocton, OH 43812 (614) 622-7444 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-503 7 4 4,4 Source of goverment documents. are available from: Copies of military and federal documents Naval Publications and Forms Center ATTN:
19、 NPODS 5801 Tabor Avenue Philadelphia, PA 19120-5099 Custodian: Navy - NU Navy - MC Review activities: DLA - CT User activities: Navy - AS, SH, CG 6 Preparing activity: Navy - NU Project 8460-0077 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5
20、0374 Li 9777774 0032350 4 i .- I: I I I- l i l t A-A-5 O 3 7 4 FIGURE I - BAG DIMENSIONS 5 M a 22 8 FIGURE 2 - CARRYING STRAP HANDLE NOTE: ALL MEASUREMENTS ARE IN INCHES 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-c A-A-503 7 4 7 A FIGURE 4 - END VIEW r- bI FIQURE 0 - SLIDE *FASTENER Y NOTE: ALL MEASUREMENTS ARE IN INCHES i 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
