1、A-A-50614 D 9999974 03631590 TBT D I INcH-PouND 1 A-A-50 6 14 3 December 1993 COMMERCIAL ITEM DESCRIPTION BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 12 VOLT, 100 AMPERE-HOUR, TYPE 12V-S-100 AH The General Services Administration has authorized the use of this Commercial Item De
2、scription. Abstract. This Commercial Item Description covers a 12 volt, 100 ampere-hour sealed, valve-regulated lead-acid (VRLA), storage battery with a low rate and deep discharge duty cycle for use on Naval surface ships. Salient characteristics. The product shall be a 12 volt, 100 ampere-hour sea
3、led lead-acid storage battery, meeting the requirements specified below. 1. 2. 3. Dimensions. The maximum dimensions for the 12 volt battery shall be: length - 21.3 inches width - 11.1 inches height - 10.9 inches Weiqht. The battery weight shall be 110 pounds maximum when filled. Terminals. The term
4、inals shall be posts with lugs capable of receiving a round end lug accepting an AWG #2. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, ATTN: 03R42, 2531 J
5、efferson Davis Hwy, Arlington, VA 22242-5160. FSC 6140 DISTRIBUTION STATEMENT A. Approved for public release: 0 distribution is unlimited. 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50614 9999974 0363593 93b A-A-50614 4. Pressure relief va
6、lve. The battery shall have sufficient pressure relief valves to prevent rupturing of the battery when internal pressure exceed battery design pressure. 5. Capacity. a. The capacity for the 10 ampere (or 10 hour) rate shall be a minimum of 100 ampere-hours with a cut-off voltage of 10.5 volts in the
7、 temperature range of 20“ to 27“ C. b. The capacity for the 32.5 ampere (or 2 hour) rate shall be a minimum of 65 ampere-hours with a cut-off voltage of 9.6 volts in the temperature range of 20“ to 27“ C. 6. Reserve capacity. The battery shall deliver 25 amperes for a minimum of 150 minutes at 25C w
8、ith a cut-off voltage of 10.5 volts. 7. Retention of charse. The battery shall retain at least 80% of the 10 hour-rate capacity (100 ampere-hours) 28 days after charge termination when discharged at the 10 hour rate. 8. Cycling. The battery shall be capable of 270 cycles minimum. The cycles shall co
9、nsist of any combination of the requirements listed in paragraphs 5 and 7 with a minimum of 80% capacity at the specified rate. At least one cycle of each capacity check listed in paragraph 5 shall be conducted for verification. Only cycles yielding 80% or greater capacity are to be counted. Chargin
10、g shall be conducted with a constant potential charger set at 14.1 volts with a limiting current of 20 amperes. 9. Each battery shall be provided with a lifting device or system to facilitate manual or mechanical handling. 10. Bid samples. When specified in the solicitation, bid samples shall be fur
11、nished. Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, 2 Provided by IHSNot for ResaleNo reproduct
12、ion or networking permitted without license from IHS-,-,-A-A-50614 9999774 DLbL.592 52 A-A-50614 specifications, standards and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for u
13、nder the provisions of the contract. Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of Federal Sta
14、ndard No. 376 and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions, the dimensions and tolerances shall not exceed those specified in the inch-pound units, and overall outside dimensions shall remain equal to or less than those sta
15、ted in inches. The contracting officer has the option of accepting or rejecting the product. Resulatorv Reuuirements. The of feror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. Safetv. A Material Safety Data Sheet (MSDS) i
16、s required in accordance with Code of Federal Regulations, 29 CFR 1910-1200 and FED-STD-313. Preservation, Dackaqinq, p ackinq, labelinq and markinq. The preservation, packaging, packing, labeling and marking shall be as specified in the contract or order. Notes. Purchaser should specify voltage, am
17、pere-hours and size if bid samples are required. FED-STD-376 is available from the Standardization Documents Order Desk, 700 Robbins Avenue, Building #4, Section D, Philadelphia, PA 19111-5094. Potential sources. Based on information available at the time this document was developed, the following p
18、roducts are believed to comply with the salient characteristics of this Commercial Item Description. Competition is not limited to the indicated sources. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Manufacturer A-A-50bL4 H 9999974 OLbL593 799 H
19、 A-A-50 6 14 Manufacturers battery code C&D Charter Power Systems Inc. LS- 12 -1 o o 3043 Walton Road NSN: 6140-01-291-6488 Plymouth Meeting, PA 19462 Powersafe Standby Batteries Inc. 3VBll (Chloride Systems) POB 492 Mallard Lane North Haven, CT 06473 MILITARY INTERESTS: CIVIL AGENCY COORDINATING AC
20、TIVITIES Military Coordinatinq Activity Navy - SH Custodian Army - ER Air Force - 99 Navy - SH Review GSA - FSS PREPARING ACTIVITY: NAVY - SH PROJECT 6140-0745 Army - AV, MI, AT Air Force - 11, 80 Navy - AS DLA - GS 4 e Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
