1、COMMERCIAL ITEM DESCRIPTION LAMP, FLUORESCENT, F40/T12(COLOR)/RS A-A-55002. September- 10, 1390 SUPERSEDING (See Heading) General Services Administration has authorized the use of this Comrrercial Item Description (CID) as replacement for CIDs A-A-l581B, A-A-l848A, A-A-l849A, A-A-1851A and Federal S
2、pecifications W-L-O0116/28A, /29A, /30A, and /31A which are canceled. 1, Abstract. This CID describes the general requirements for procurement of orle type fluorescent lamp of certain colors used for typical illumination. 2, Salient characteristics. This Commercial Item Description (CID) covers F40/
3、T-12, fluorescent lamps, 40 watt, 425 ma, rapid-start, 48 inch nominal length, medium bipin contact base, with a minimum of 20,000 hours average rated life at 3 hrs! start, further described in table I. Table I. Color/lumen characteristics. burning 1 ID number3 A5 500 2- 1 A55002-2 A5500 2- 3 A55002
4、- 4 I Beneficial comments (recommendations, additions, deletions) and any perti- nent data which may be of use in improving this document should be sent by letter to: Commander, Defense General Supply Center, ATTN: Parts Control Branch (SSC), Richmond VA 23297-5000. OMB control number NIA FSC 6240 D
5、ISTRIBUTION STATEMENT A: Approval for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55002 62 7799979 0057037 7 - I A-A-5 5 O0 2 Footnotes to table 1: accordance with ANSI C78,1, Dimensional and electri
6、cal characteristics shall be in 1In compliance with ANSI C78.376, where applicable, Color temperature and =Indicates the average nominal value per lamp on a lot basis. 3These part identification numbers are for government purposes and do not color rendering index CRI are approximates. constitute a r
7、equirement for the contractor. 3. Contractor certification. The contractor shall certify and maintain substantiating evidence that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices, The Government reserves the right to require proof of suc
8、h conformances prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4. Metric Products, Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within t
9、he tolerances specified using conversion tables contained in the latest revision of Federal Standard No, 376, and all other requirements of this Commercial Item Description are met, If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pou
10、nd units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product, 5. Regulatory requirements, The offeror/contractor is encouraged to use recovered materials in accordance with Public
11、 Law 94-580 to the maximum extent practical. 6, Preservation, packaging, packing, labeling, and marking. Preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order. If not specified in the contract or order shall comply with ASTM D-3951, 6.1, Anti-counterf
12、eit marking. When an item has been deemed to be susceptible to counterfeiting, each item shall be marked in such a manner as to provide the contracting activity with an authentication and traceability track to the true manufacturer, manufacturer and provided to the quality assurance office of the co
13、ntracting agency by secure means. The method in which this is done shall be proprietary to the true 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55002 7. Notes, The issues of ANSI C78.1, C78.376 and ASTM D-3951 in effect on the date of solic
14、itation shall be used to determine compliance with these requirements, (Copies of ANSI Standards are available from the American National Standards Institute, 1430 Broadway, New York NY 10018,) (Copies of ASTM Standards are available from the American Society for Testing and Materials, 1916 Race Str
15、eet, Philadelphia, PA 19103,) Purchaser should specify the following ordering data; Title, number and date of this document CID based part identification number Brand names and National Stock Numbers are listed in table II: Table II, Brand names and stock numbers National Stock Manufacturer no , Num
16、bers (NSNs) 11 CAGE codel A55002-1 6240-00-152-2987 FSOTlZ/CW/RS ,06172, 08805, 1HT85, 1 1 1 1 111 6240-00-617-1751 lF40T12/W/RSll 08805, 1HT85, 62607 32011, 62607, F/wlKl I II II I Il 08805, 1HT85, 62607, 6240-00-617-1746 F40Tl2/D/RS 06172, 08805, 1HT85, II A55002-4 II II 11 62607 1Footnote to tabl
17、e II: Commercial And Government Entity code definition: 06172 - Marvel Lamp Co, Inc., 2083 Center Ave., Ft. Lee, NJ 07024-4999, 08805 - General Electric Co, Lighting Business Group Nela Park, 1HT85 - GTE Products Corp, Sylvania Miniature Lighting Div, W, Main St, 32011 - Jewett Refrigerator Co, Inc,
18、 2 Letchworth, Buffalo NY 14213-1008, 62607 - North American Phillips Lighting Corp, A Div., 1 Westinghouse Plaza Cleveland OH 44112. Hillsboro , NH 03244. Bloomfield, NJ 07003-4601, 3 . . - . . _ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. - A
19、-A-55002 62 7777774 00570411 7 A-A-5 5 O0 2 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITIES: COMMERCE - NIST GSA - FSS PREPARING ACTIVITY: Navy - AS AGENT : DLA - GS Military Coordinating Activity Navy - AS Custodians Air Force - 99 Amy - ME Navy - SH Project 6240-1101 FSC 6240 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
