1、A-A-55005 b2 W - 9997774 0057026 O 1 INCH-POUND II A-A-5500 5 Sept-ember 10, 199Ci SUPERSEDING (See Heading) COMMERCIAL, ITEM DESCRIPTION LAMP, FLUORESCENT, F20/T12/(COLOR) General Services Administration has authorized the use of this Commercial Item Description (CID) as replacement for CIDs A-A-19
2、83, A-A-2150, A-A-2151, and Federal Specifications W-L-O0116/16A, /17A, and /18A which are canceled, 1, Abstract. This CID describes the general requirements for procurement of one type fluorescent lamp of certain colors used for typical illumination. 2, Salient characteristics, This Comercial Item
3、Description (CID) covers F20/T-12, Fluorescent lamps, 20 watt, 425 ma, preheat, 24 inch nominal length, medium bipin contact base, 9,000 hours average rated life at 3 hrs/start, further described in table I. or less. The average mercury content of each lamp is 50mg Table I, Colorllumen characteristi
4、cs. Color1 Cool White White (color temperature) CRI (4100K) 62.(350OK)521 Il Initial lumens2 I (after 100 hrs burning) / 1165 1 1180 1 970 1 Lumens at 4800 hours2 II 1035 II 1050 II 845 1 1 CID based part ID number3 II A55005-1 II A55005-2 II A55005-3 II Beneficial comments (recommendations, additio
5、ns, deletions) and any perti- nent data which may be of use in improving this document should be sent by letter to: Comander, Defense General Supply Center, ATTN: Parts Control Branch (SSC), Richmond VA 23297-5000. OMB control number N/A FSC 6240 DISTRIBUTION STATEMENT A: Approval for public release
6、 distribution is unlimited, Licensed by Information Handling ServicesA-A-55005 b2 m 7979974 0057027 2 m - A-A-55005 Footnotes to table i: accordance with ANSI C78.1, Dimensional and electrical characteristics shall be in In compliance with ANSI C78.376; where applicable, Color temperature and 2Ind
7、cates the average nominal value per lamp on a lot basis, “These part identification numbers are for government purposes and do not color rendering index CRI are approximates. constitute a requirement for the contractor. 3, Contractor certification, The contractor shall certify and maintain sub- stan
8、tiating evidence that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformances prior to first delivery and thereafter as may be otherwise provided for under the provisions o
9、f the contract , 4. Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No, 376
10、 and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The
11、 contracting officer has the option of accepting or rejecting the product. 5. Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical, 6. Lamps furnished to the U.S, Navy. All lamps furnished from t
12、his CID to the U.S, Navy for use aboard ship or submarine are to be certified as follows: “The average mercury content of each lamp supplied herein shall not exceed 50mg.“ A lot may be rejected if the contractor fails to supply the above certification, Certification stating that the above requiremen
13、t has been met shall accompany each shipment of lamps requested by the U,S. Navy. 7, Preservation, packing, labeling, and marking, Preservation, packaging, packing, labeling, and marking shall be as specified in the contract. or order, If not specified in the contract or order shall comply with ASTM
14、 D-3951. 2 Licensed by Information Handling ServicesA-A-5 5 O0 5 7.1 Anti-counterfeit marking. counterfeiting, each item shall be marked in such a manner as to provide the contracting activity with an authentication and traceability track to the true manufacturer, manufacturer and provided to the qu
15、ality assurance office of the contracting agency by secure means, 8. Notes. - The issues of ANSI C78.2, C78.376, and ASTM D-3951 in effect on the date of solicitatimi shall be used to determine compliance with these requirements. When an item has been deemed to be susceptible to The method in which
16、this is done shall be proprietary to the true (Copies of ANSI Standards are available from the American National Standards Institute, 1430 Broadway, New York NY 10018.) (Copies of ASTM Standards are available from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 191
17、03.) Purchaser should specify the following ordering data; Title, number and date of this document. CID based part identification number. Brand names and National Stock Numbers are listed in table II: Table II, Brand names and stock numbers no. Manufacturer stock number CAGE code F20T12 /CW 06172, 0
18、8805, 1HT85, 58325, 62607, 08805, 1HT85, 62607 06172, 08805, 1HT85, F20T12D I 58325, 62607 lFootnote to table II: Commercial And Government Entity code definition: 06172 - Marvel Lamp Co. Inc, 2083 Center Ave, Ft. Lee, NJ 07024-4999. 08805 - General Electric Co, Lighting Business Group Nela Park, Cl
19、eveland OH 44112. 1HT85 - GTE Products Corp, Sylvania Miniature Lighting Div. W. Main St, Hillsboro , NH 03244. . - 3 Licensed by Information Handling ServicesA-A-55005 62 m 7777774 0057027-b m A-A-5 5005 58325 - US Lighting Corp., 4400 Stamp Rd., Temple Hills, MD 20748-6716 62607 - North American P
20、hillips Lighting Corp., A Div., 1 Westinghouse Plaza Bloomfield, NJ 07003-4601. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITIES: Military Coordinating Activity COMMERCE - NIST Navy - AS GSA - FSS Custodians PREPARING ACTIVITY: Air Force - 99 Navy - SH AGENT : Navy - AS Amy - ME DLA - GS Project 6240-1101 FSC 6240 4 . Licensed by Information Handling Services
