1、INCH-POUNDAN6240 Rev 2 18 June 2008 SUPERSEDING AN6240 Rev 1 2 Sept 1949 MILITARY SPECIFICATION SHEET FILTER - HYDRAULIC REPLACEABLE ELEMENT VENT TYPE Inactive for new design, dated 22 January 1999. This specification is approved for use by all Departments and Agencies of the Department of Defense.
2、The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-F-5504. FIGURE 1. Filter element dimensions and configuration. AMSC N/A FSC 1650 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AN6240 Rev
3、2 REQUIREMENTS: 1. Material: see MIL-F-5504, the procurement specification. 2. Finish: see MIL-F-5504, the procurement specification. 3. All joints and seals to be lock-wired for safety. 4. Part or Identification Number - AN6240-1. 5. Dry weight maximum 0.25 lb. NOTES: 1. This filter includes AN6237
4、-1 element. 2. This filter is a qualified item; the suppliers are listed on QPL-5504. 3. Dimensions are in inches. 4. Unless otherwise specified, tolerances +.016. 5. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue
5、due to the extent of the changes. CONCLUDING MATERIAL Custodians: Preparing activity: Army-AV Navy-AS Navy-AS Air Force-99 (Project 1650-2008-006) Review activities: Army-MI Navy-MC, SA, SH Air Force-71 DLA-CC, GS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
