1、 FED-STD-36LI 67 W 7777777 OOOLJ482 2 Fed. Std. No. 364 December 9, 1975 (See S6) FEDERAL STANDARD MOTION PICTURE, SOUND, SUPER FORMAT FOR 8 MILLIMETER, Authority - This standard is issued pursuant to the Federal Property and Administrative Services Act of 1949, as amended, and its application to bo
2、th Super 8 millimeter motion picture film and equipment is mandatory on all Federal Agencies. S1. Purpose and Scope. This standard establishes the picture format, sound format, an sound synchronization of Super 8 millimeter motion picture films, which have been adopted to achieve the highest degree
3、of uniformity and standardization for the Federal Supply system. S2. Application. Specification and procurement documents for Super 8mm motion picture projectors, cameras, and associated film handling equipment shall specify that all such equipment shall be compatible with Super 8mm film conforming
4、to the require- ments of this standard. 53. Requirements. Picture format, sound format, and sound synchronization of Super Ern motion picture films shall conform to the applicable provisions of the following American National Standards of the issue in effect on date of invitation for bids. American
5、National Standards Institute, Inc., (ANSI) Publications: PH22.154-1969 - Dimensions of Projectable Image Area on Super 8 PH22.161-1968(R1973) - Dimensions of Magnetic Striping of Super PH22.164-1969 - Dimensions for Magnetic Sound Record on Super 8 (Application for copies should be addressed to the
6、American National Film. Picture Film Perforated 1R-1667. Film Perforated 1R-1667. Institute, Inc., 1430 Broadway, New York, NY 10018) Motion Picture 8 Motion Mo?tion Picture Standards S4. Changes. When a Federal agency considers that this standard does not provide for its essential needs, written re
7、quest for changing or adding to the standard, supported by adequate justification, shall be sent to the Administration. The justifi- cation shall explain wherein the standard does not provide for essential needs. The request shall be sent in duplicate to the General Services Administration, Federal
8、Supply Service, Mechanical and Electrical Division, Washington, DC 20406. The Adminis- tration will determine the appropriate action to be taken and will notify the agency. S5. Conflict with referenced specifications. Where the requirements stated in this standard conflict with any requirement in a
9、referenced specification, the requirements of the standard shall apply. Nature of conflict between the standard and the referenced specification shall be submitted in duplicate to the General Services Administratton, Federal Supply Service, Mechanical and Electrical Division, Washington, DC 20406. F
10、SC 6730 -_ - THIS DOCUMENT CONTAINS PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- FED-STD-364 67 7777777 O002483 I Fed. Sed. No. 364 56. Suppersessien data. This standard supersedes Military Standard MIL-STD-1354, 21 September 1970. Militar
11、y custodians: - EL Navy - AS ir Force - 70 Review Activities: -Y - Navy - MC, AS Air Force - User Activities: Army - AV, MI Navy - Air Force - 70 Preparing Act.ivit.y: GSA-FSS Civil Agency Coordinating Activities: Commerce CSC DOT EPA Energy Research Dev. Adm. FCC GSA-FSS HEN HUD Interior Justice La
12、bor NASA Small Business Adm. State Treasury - IRS USIA USDA VA U. S. GOVERNHENT PRINTING OFFICE : 1976 - 210-818/2254 This document is available from the General Services Administration (GSA), acting as an agent for the superintendent of Document. purposes is available from GSA Business Service Centers. Copies are for sale at the GSA, Specification Sales, Building 197 (Washington Navy Yard), Washington, DC 20407 for 25 cents each. A copy for bidding and contracting 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
