1、_- i MI L-A-48027A (AS ) AMENDMENT 1 23 October 1987 MILITARY SPECIFICATION ADAPTER-BOOSTER, BOMB, NOSE, THERMALLY PROTECTED M148E1, LOADING, ASSEMBLING AND PACKING This amendment forms a part of Military Specification MIL-A-4807A(PA), dated 30 June 1975, and is approved for use within the Naval Air
2、 Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 Fi rs t 1 i ne, del e te “MI L-A-48027A( PA) and subs t i tu te : “MI L-A-48027A(AS) 1. After 1.1, add “Scope.“ Delete “2.1“ and its paragraph in its entirety and s
3、ubstitute: Specifications and standard. The fol lowing specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and
4、Standards (DODISS) and supplement thereto, cited in the solicitation.“ “2.1 Delete “PUBLICATIONS“ and “ASTM D162“ and -its title. PAGE 2 De 1 e te “ASTM-D2044“ and “ASTM-D792-66“ and the i r ti t 1 e s. Above DRAWINGS, add: “2.1.2 Drawings. The following drawings form a part of this specification to
5、 the extent specified herein. Unless otherwise specified, the issues shall be those in effect on the date of the sol ici tation.“ Below the list of drawings, delete the paragraph on Copies in its entirety and substi tute: contractors in connection with specific acquisition functions should be obtain
6、ed from the contracting activity or as directed by the contracting activity. 1 “(Copies of specifications, standards, and drawings required by AMSC NIA 1 of 4 FSC 1325 DISTRIBUTION STATEMENT A. Approved for public release; distribution ,is un1 imited. .- Provided by IHSNot for ResaleNo reproduction
7、or networking permitted without license from IHS-,-,-MIL-A-98027A (3) 33 7777906 0335505 T MIL-A-48027A(AS) AMENDMENT 1 Add the fol lowing parragraph: “2.2 Other publications. specification to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted
8、shall be those listed in the issue of the DODISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issue of the nongovernment documents which is current on the date of the sol i ci tat ion. The following documents form a part of
9、this American Society for Testing and Materials (ASTM) D792 Specify Gravity and Density of Plastics by Displacement, Test Methods D1692 Flammability of Plastic Sheeting and Cellular Plastics D2044 Moisture Content in Paper and Paper-board by Toluene Di sti 1 lation (Application for copies should be
10、addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Nongovernment standards and other publications are normally available from the organizations which prepare or which distribute the documents. These documents also may be available in or through l
11、ibraries or other informational services. 1 Add the fol lowing: “2.3 Order of precedence. this specification and the references cited herein (except for associated In the event of a conflict between the text of detail specifications, specification sheets or MS standards), the text of this specificat
12、ion shall take precedence. Nothing in this specification, however, shall supersede applicable laws and regulations unless a specific exemption has been obtai ned. II PAGE 3 Delete 4.1 in its entirety and substitute: “4.1 Responsibility for inspection. Unless otherwise specified in the contract or pu
13、rchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements spec
14、ified herein, unless disapproved by the Government. The ? Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.“ ! . 2 Provided by IHSNot for Resal
15、eNo reproduction or networking permitted without license from IHS-,-,-/- I MIL-A-48027A (1) 13 m 777770b 0315506 1 I! MI L-A-48027A(AS) AMENDMENT 1 Add the following paragraph: “4.1.1 Responsibility for compliance. All items-must meet all requirements of sections 3 and 5. become a part of the contra
16、ctors overall inspection system or quality program. shall not relieve the contractor of the responsibility of assuring that all- products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Sampling in quality conformance does not authorize submission
17、 of known defective material, either indicated or actual, nor does it commi t the Government to acceptance of defective material .I The inspection set forth in this specification shall The absence of any inspection requirements in the specification Add: “4.1.2 Standard quality assurance provisions.
18、Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby a part of this detail specification.“ PAGE 16 Delete “5. PREPARATION FOR DELIVERY“ and substi tute: “5. PACKAGING“. In 6.2, add the following: “d. Where first article samples, data cards, a
19、nd inspection equipment designs are to be forwarded. e. Name and address of Government approved test laboratory. f. Name and location of Government representative responsible for selection of inspection lots and samples. 6.3 Submission of inspection equipment designs for approval, delete its paragra
20、ph in its entirety and substitute: equipment designs shall be as specified in the contract or purchase order (see 6.2) .I “The destination of inspection 6.4 Distribution of ammunition data cards, delete its paragraph in its entirety and substitute: “The distribution of data cards shall be as specifi
21、ed in the contract or purchase order -(see 6.2) .II Add the following paragraphs: “6.5 First article. When a first article inspection is required, the item will be tested and should be a first article sample. The contracting officer should include specific instructions in acquisition documents regar
22、ding arrangements for examinations, approval of first article test results, and disposition of first articles. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-48027A(AS) AMENDMENT 1 6.6 Subject term (key word) listing. Adapter-Boos ter, bomb,
23、 nose, M148E1 Adapter-Boos ter , bomb, nose, M148E1, loadi ng, assembl i ng, and packi ng“ . Under Preparing Activity, delete “Army - PA“ and substitute: “Navy - AS“ and delete “Custodian: Army - PA“. I I. Preparing Activity: Navy - AS (Project No. 1325-N132) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
