1、fi -/8-/4 MIL-C-24217/ 1 (SH) 5 September 1984 MILITARY SPECIFICATION SHEET RECEPTACLE ASSEMBLY (WELDED TYPE) This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Depart- ments and Agencies of the Department of Defense
2、 The complete requirements for acquiring the receptacle assembly described herein shall consist of this document and the latest issue of MIL-C-24217. O -RING O-RING A“ Ii 6 MAJOR POLARIZING KEY FACE SEAL. PN CONTACT NSCATON 8 I, c - CAP PRCTTECTVE RECEPTACLE SHELL PR07FCTNE CAP SH i2Sn FIGURE 1. Co
3、nfiguration of receptacle assembly. - FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Parts description. MZ4ZI7/1- 01 5 RECEPTACLE RECEPTACLE cj$+ 14 NO, 16 2.74 1.880 24 NO. 16 3.385 2.260 9 3.365 2.255 4. I60 2.770 2 IZ - 1.5 2.76
4、5 3 37 NO. 16 I M 2421 7/ I - 046, 48 NO. 16 32 - w4z7/ 1-647 3 NO.12 28 3 hi0 8 ,740 1.010 3 - .760 .9% 16 - 2- 9 -740 1.010 .760 1990 16 5hJO I2 3U04 9MO 12 3NO i2 WITCI 3MO 0 I 22 7/ 1-049 M24 2 -u- - 2NO o WITH 4WO I2 ,740 If.010 1 -3 - I ,760 .990 16 3 6 Provided by IHSNot for ResaleNo reproduc
5、tion or networking permitted without license from IHS-,-,-MIL-C-2qZL7/L 59 a 9999906 0029038 T _ MIL-C-24217/1(SH) -MAJOR KEY (TYP) - -.103(TYP) 3 NO. 16 5 NO. 6 9 NO. 16 E . i45 14 NO. 16 SH I2580 . 24 NO. 16 NOTES : 1. View looking at ront face of receptacle (face A-A). 2. Datums -C- and -D- are v
6、ertical and horizontal center lines of the receptacle bore diameter or plug front insulator o.d., their point of intersection having a true position within 0.003 diameter. 0.003 diameter to datums -C- and -D-. 3. Pin contacts and socket contact holes to be true position within FIGURE4. Pin arrangeme
7、nts. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I .e64 (TYP) 3 NO. 12 8H ttW 40 NO 16 NOTES : 1. 2. View looking at front face of receptacle (face A-A). Datums -C- and -D- are vertical and horizontal center lines of the receptacle bore diamete
8、r or plug front: insulator o.d., their point of intersection having a true position within 0.003 diameter. 0.003 diameter to datums -C- and -D-. 3. Pin contacts and socket contact holes to be true position within FIGURE 5. Pin arrangements. a Provided by IHSNot for ResaleNo reproduction or networkin
9、g permitted without license from IHS-,-,-MIL-C-242L7/1 57 W 777770b 0027040 8 W NOTES : 1. 2. View looking at front face of receptacle (face A-A). Datums -C- and -D- are vertical and horizontal.center lines of the receptacle bore diameter or plug front insulator o.d., their point of intersection hav
10、ing a true position within 0.003 diameter. Pin contacts and socket contact holes to be true position within 0.003 diameter to datums -C- and -D-. 3. FIGURE 6. Pin arrangements. 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HQUIREMENTS: 1; Dimensi
11、ons and configuration: See figures and tables. 2, Contact gasket (face seal) shall be molded and secured to the receptacle web with adhesive or p0ure.d in place using a clear RTV silicone, General Electric RJX 615 with General Electric SS-4120 primer or equal. Either method shall prevent the entranc
12、e of water under the seal. shall be in accordance with figures 4, 5 or 6, as applicable. Holes shall be 0.006 to 0.010 inch smaller than the corresponding pin sizes. Receptacle assemblies shall be packaged as shown in the assembly view (protective cover tightened to compress the O-ring), except that
13、 the indicator O-ring (“A“) shall be separately packaged. 3, Arrangement and location of contact holes in premolded contact gaskets 4. Preparing activity: Navy - SH (Project 5935-N246-1) AU.8. QOVERNMENT PRINTINQ OFFICE: 1984 - 706-040/A4603 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
