1、 1. I. . .: . I. 3. .- . 5 . i 1. , ._ . . . I : . . 1; : MILITARY. SPECIFICATION . e. . . I. ., . I. k - ._ . CARTRIDGES, DELAY:, MARK 4 MOD 2, MARK 5 %IOD .2 . . - AND .MARK 6 -MOD 2 . . .- . . This amendment -.forms a part. of Military Specification . MIL-C-81788(AS) -of 6 August .1970, and has b
2、een approved -by the Naval Air Systems Command, Department of the Navy. Pages 9 and 10 -, . ._ 4.7.7.1, delete and substitute: l4.7.7.1 The number of cartridges selected from each production lot . for the ballistic test sh.all be in accordance with the requirements of MIL-STD-105, Inspection Level T
3、I, for an AQL of 0.15, single sampling plan for normal inspection. The sample shall be randomly divided into three equal groups. -If the sample does not divide evenly, the odd cartridges shall be placed in the third group. Samples in Group 1 inserted in the sleeve (Drawing 2838190), of the test set
4、Drawing 2838183), shall be conditioned at -65O + SF for not less than six nor more than twenty- four hours. and fired-in the test set within two minutes after removal from conditioning. 2838190); of the test set (Drawing 2833183), shall be conditioned at +160 + SF for not less than six nor more tha
5、n twenty-four hours and fired Xn the test set within two minutes after removal from conditioning. Samples in Group 3 inserted in the sleeve (Drawing 2838190), of the test set (Drawing 2838183), shall be conditioned at +700 + 5OF for a minimum of six hours and fired in the test set within two mTnutes
6、 after removal from conditioning. tests, ten additional cartridges shall be furnished from the production lot for investigative purposes .It Samples in Group 2 inserted in the sleeve (Drawing In addition to the sample of cartridges for the above Pro j ect No. 1377-N494 IPSC 13771 .- 3. .* . . L. 2 . .-. ,. . 8. -. . :- c. . . . z . Licensed by Information Handling Services
