1、AMSC N/A FSC 5935 INCH-POUND MIL-DTL-24231/2E(SH) 26 April 2013 SUPERSEDING MIL-C-24231/2D(SH) 15 May 1987 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, TYPE I, 90-DEGREE, MOLDED, THREE-, FOUR-, AND FIVE-CONDUCTOR This specification is approved for use by the Naval Sea Systems Command and is available
2、 for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-24231. REQUIREMENTS: 1. Dimensions and configuration: see figure 1. 2. For termination of cable shield, see table o
3、f cable types for molded plugs in MIL-DTL-24231. 3. Ni-Cu plug sleeves shall be coated with plasma spray non-conductive material in accordance with S9320-AM-PRO-030/MLDG. 4. All dimensions are in inches. 5. Tolerances shall be as follows, or as stated: a. Decimals 0.005 inch. b. Fractions 164 inch.
4、c. Angular dimensions degree. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/2E(SH) 2 FIGURE 1. Connector, plug, 90-degree, molded, three-, four-, and five-conductor. FIGUR E 1. Con nec to r, p lug, 9 0-d egr ee, m olded, t hre e-, fo
5、ur- a nd five-co nd ucto r.123412234351#F OUR CON DU CTOR90 P LU G A SS EMBLY,M 24 23 1/2 -002SY M BO L N O. 713.8T HR EE C ON DUCTOR90 P LU G A SS EMBLY,M 24 23 1/2 -001SY M BO L N O. 713.5F IVE CO ND UC TOR90 P LU G A SS EMBLY,M 24 23 1/2 -003( SA M E A S M 24 23 1/2-002EX C EP T AS SHOWN.)# - KE
6、Y M U ST BE LO C AT ED IN POSITIONSH OW N FO R EA C H ASSEMBLYC AB LE18R916C OM POUN D,PO LY U R ETHANE3 M IN438M INT ERM INATESH IEL D HERE,SE E R EQ T 2.214R S 34334M AXASSEMBLY, IN S E RTCOMPOUND, E P O X YSL EE VE , PLUGM 24 23 1/1 -010C OU PLINGM 24 23 1/1 -011510 11 1241389312Provided by IHSNo
7、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/2E(SH) 3 TABLE I. Parts list. Item no. 1/ Description 2/ Quantity for M24231/2- 3/ Material/specification Remarks 001 002 003 1 Plug assembly, 90 degrees, 3-conductor, symbol no. 713.5 1 4/ See figure 1. 2
8、 Plug assembly, 90 degrees, 4-conductor, symbol no. 713.8 1 4/ See figure 1. 3 Plug assembly, 90 degrees, 5-conductor 1 4/ See figure 1. 4 Sleeve, plug 1 1 1 M24231/1-010 See figure 1. 5 Coupling 1 1 1 M24231/1-011 See figure 1. 6 Cap, protective 1 1 1 M24231/1-012 Nonpressure-proof 7 Sealing plug a
9、ssembly 1 1 1 M24231/1-020 Pressure-proof 8 Compound, polyurethane As required 5/ See figure 1. 9 Cable As required 6/ See figure 1. 10 Insert assembly (3-pin) 1 M24231/29-001 See figure 1. 11 Insert assembly (4-pin) 1 M24231/29-002 See figure 1. 12 Insert assembly (5-pin) 1 M24231/29-010 See figure
10、 1. 13 Compound epoxy resin As required Cast epoxy resin compound 7/ Base EE4183 or RE2039, hardener HD-3561; see figure 1. NOTES: 1/ Item numbers are the same as encircled numbers shown on figures. 2/ See applicable figure or table listed in remarks column for part numbers and dimensions. 3/ Quanti
11、ty is for one complete assembly of each size. 4/ When plugs are purchased as a kit, the inserts are not molded in accordance with MIL-DTL-24231/29. The socket contacts and sleeving are individually provided. 5/ Molding compound to be procured in accordance with S9320-AM-PRO-020. 6/ For cable type, s
12、ee table for cross indexing of mating plugs, receptacles, adapters, and single and multiple cable connectors of MIL-DTL-24231. 7/ Hysol base EE4183 or RE2039, hardener HD-3561, Hysol Division, Dexter Corporation, Olean, NY, CAGE 04347, or equal. Provided by IHSNot for ResaleNo reproduction or networ
13、king permitted without license from IHS-,-,-MIL-DTL-24231/2E(SH) 4 CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Preparing activity: Navy SH (Project 5935-2011-051) NOTE: The acti
14、vities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
