1、MIL-E-2qb52 (1) LI2 7777706 0232770 O . 5-13 - Add: “FED-STD-595 - Colors“. 2.1.1, under STANDARDS, MILITARY; Add: “DOD-STD-100 - Engineering Drawing Practices . PAGE 3 3.1: Delete and substitute: - CL- “3.1 First article. When specified in the contract or purchase order, a sample shall be subjected
2、 to first article inspection (see 4.2 and 6.3).“ 3.2.1: Delete and substitute: “3.2.1 Finish. The shell shall be finished with a red enamel protective coating such as polyester or polyurethane, for identification and enhanced corrosion resistance. dance with FED-STD-595.“ The coating shall be color
3、no. 11105 red gloss in accor- AMSC N/A FSC 4210 DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited 1 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-29652 (3) 92 m 7797706 0232773 2 m MIL-E-24652(SH) AMENDMENT 1 P
4、AGE 7 Add as paragraph 3.10: “3.10 Drawings. When specified in the contract or order, drawings shall be prepared in accordance with DOD-STD-100 (see 6.2.2): Add as new paragraph 4.1.1: “4.1.1 Responsibility for compliance. All items must meet all require- ments of sections 3 and 5. The inspection se
5、t forth in this specification shall become a part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of assuring that all products or supplies submitted to the Governm
6、ent for acceptance comply with all requirements of the contract. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, nor does it commit the Government to acceptance of defective material.“ PAGE 8 4.3.1: Delete in its entirety. 4.4: D
7、elete and substitute: “4.4 Quality conformance inspection. Quality conformance inspection shall e,-. consist of the examination of 4.5.“ - PAGE 9 4.6.2.1, line 9: Delete “Fialure“ and substitute “Failure.“ 6.2.2: Delete and substitute: “6.2.2 Data requirements. When this specification is used in an
8、acquisi- tion and data are required to be delivered, the data requirements identified below shall be developed as specified by an approved Data Item Description (DD Form 1664) and delivered in accordance with the approved Contract Data Require- ments List (CDRL), incorporated into the contract. When
9、 the provisions of DoD FAR Supplement, Part 27, Sub-Part 27.410-6 (DD Form 1423) are invoked and the DD Form 1423 is not used, the data specified below shall be delivered by the contractor in accordance with the contract or purchase order requirements. Deliverable data required by this specification
10、 are cited in the following paragraph. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-24652(SH) AMENDMENT 1 Paragraph no. Data requirement title Applicable DID no. Option 3.10 Drawings, engineering DI-E-7031 Level 2 and associated lists (2 s
11、ets) (Data item descriptions related to this specification, and identified in section 6 will be approved and listed as such in DoD 5010.12-L., Vol. I, AMSDL. Copies of data item descriptions required by the contractors in connection with specific acquisition functions should be obtained from the Nav
12、al Publications and Forms Center or as directed by the contracting officer.) 6.2.2.1 The data requirements of 6.2.2 and any task in sections 3, 4, or 5 of this specification required to be performed to meet a data requirement may be waived by the contracting/acquisition activity upon certification b
13、y the offeror that identical data were submitted by the offeror and accepted by the Government under a previous contract for identical item acquired to this speci- fication. contract regardless of whether an identical item has been supplied previously (for example, test reports).“ This does not appl
14、y to specific data whichmay be required for each 6.3: Delete and substitute: “6.3 First article. When a first article inspection is required, the items should be a first article sample. The first article should consist of one unit. The contracting officer should include specific instructions in acqu
15、isition docu- ments regarding arrangements for examinations, approval of first article test results and disposition of first articles. Invitations for bids should provide that the Government reserves the right to waive the requirement for samples for first article inspection to those bidders offerin
16、g a product which has been previously acquired or tested by the Government, and that bidders offering such products, who wish to rely on such production or test, must furnish evidence with the bid that prior Government approval is presently appropriate for the pending contract . “ 3 Preparing activity: Navy - SH (Project 4210-N205) *US. QOVERNMENT PRINTiN OFFICE 1- - 7M43/46331 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
