1、MILITARY SPECIFICATION FLAGS, ORGANIZATIONAL: STANDNS, USMC This specification is approved for use by all Department and Agencies of the Department of Defenses 1. SCOPE 1.1 Scope, This specification covers requirements for embroidered Marins Corps standard flags. A1.2 Classification. TheMarine Corps
2、 standard flags shall be of the f ollowing types as specif ied-see 6.2) : Type I - Battle standard Type II - Standard me PI1 - Resew6 standard Type IV - Command standard _- 2. APPLICABLE WCWNTS SPECIFICATIONS FEDERAL V-T-276 KK- L-16 8 W-P-268 uu-P-553 ccc-c-430 CCC-C-458 DDD-L- 20 PPP-B-636 - nitea
3、d, Cotton. - Leather, Deerskin, Chrome-Tanned. - Paper, kef t , Untreated, Hrapping - Paper, Wrapping, Tissue. - Cloth, Sheeting, Ctton, And Polyester And Cotton, - Cloth, Flannel, Cotton. - Label, For Clothing, Equipage And Tentage - kx, Fiberboard. (General Us*,. Licensed by Information Handling S
4、ervicesI C MIL-F-19579B (MC) MILITARY MIL-C-606 MIL-F-2310 MIL-C-3636 MIL-L-40051 STANDARDS FEDERAL FED-STD-191 FED-STD-751 - Cloth, Banner, Rayon. - Fringe, Ornamental, Rayon. - Cords and Tassel, Flag. - Leather, Cattlehide, For Glove Leather. - Textile Test Methods. - Stitch, Seam, And Stitching.
5、- Sampling Procedures And Tables For - Marking For Shipment And Storage. Inspection By Attributes. MILETARY MIL-STD-105 MIL-STD-129 DRAWINGS -. MARINE CORPS 71C5042A0000 71C5043AOOOO 71C5044A0000 - Flag Organizational Standard USMC, - Flag Organizational Standard USMC - Flag Organizational Standard
6、USMCR Location Of Colors. (Copies of specifications, standards and drawings required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) the issue in effect on date o: invitation for bids, or reques
7、t for pro- posal, shall apply. UNIFORM CLASSIFICATION COMMITTEE Uniform Freight Classification Rules (Application for copies should be addressed to the Uniform Classification Committee, Room 1106, 222 South Riverside Plaza, Chicago, Illinois 60606.) Licensed by Information Handling Servicesotherwise
8、 specified (see 6.2), the- contracting officer shall furnish standard samples of cloth for shade and matching colorfastness require- ments. *3.2 First article. Unless otherwise specified (see 6.2), before production 5s commenced, the first article consisting of the number of finished flags specified
9、 by the procuring activity (see 6.2) shall be submitted, or made available,to the contracting officer or his authorized representative for approval. the commencement of production, but does not relieve the supplier of re- The first article shall be manufactured by the supplier in the same fa- ciliti
10、es to be used for the manufacture of the production items. c The approval of the first article authorizes - sponsibility for compliance with all provisions of this specification. v 3.3. the cloth for the globe of the emblem shall be silver gray, Gable No. 70151; and the cloth for the motto and botto
11、m scroll shall be white, Cable No. 70001. The scarlet background cloth shall be 52 inches wide and the selvages shall form the top and bottom Licensed by Information Handling Services4 MIL-F-19579B (Mc) No. 1 Yellow HH Cable No, 67108 No. 2 Golden Light HG Cable No. 67107 No. 3. Yellow HC Cable No.
12、67103 No. 4 Gold HF Cable No. 67106 NO. 5 Antique White HA0 Cable Mo. M139 No, 6 Steel HCY Cable No. 67199 No. 7 Old Blue HBR Cable No, 67167 No, 8 Silver Gray HAM Cable No. 67137 No. 9 Toast HCU Cable No, 67195 No. 10 Scarlet HL Cable No. 67111 No. 11 White H Cable No. 67101 No. 12 Gold Brown HCT C
13、able No, 67194 NO. 15 Black HAN Cable No. 67138 NO, 14 Golden Yellow HD Cable NO.I 67104 No. 15 BromHAL Cable No. 67136 *3.3.3 Lining for headin, “he lining for the heading shall be cloth, flannel, cotton, conforming to type III, class 2, of (XC-C-458, bleached white; or cloth, sheeting, cotton, con
14、forming to type I, class 1, style A of ccc-c-430 *3.3.4 Leather. The leather tabs shall be natural colored, 5/64-to 6/64- inch-thi-er conforming to type I, class 1, of KK-L-168, except the crocking requiremnt shall not apply, or type 11,class 2, of MIL-L-40051. *3.3.5 Fringe, of MIL-P-2310.The color
15、 shall be golden yellow aatchingcable No. 65001. 3.3.6 Cord and tassel. Each flag shall be furnished with a cord and tassel conforming to class 8 of MIL-C-3636, except that colorfastness to wet (dry) cleaning shell not apply. *,3.3.7 Label, Each flag shall have an identification label conforming to
16、The fringe shall be 2-1/2-inch length conforming to class 2 type I, C1-S 5,Of DDD-L-20, *3.4 Desim. The general design of the flag shall be the Marine Corps emblem with motto ribbon and scroll appliqued and machine embroidered to both sides of a 66-inch fly by 52-inch hoist scarlet background cloth.
17、 shall have embroidered thereon the words SEMPER FIDELIS. have embroidered on the scroll the name of the organization specified (see 6.2). Type II flags shall have embroidered on the scroll UNITED STATES MARINE CORPS. Type III flags shall have ernbroidered on the scroll UNITED STATES MARINE CORPS RE
18、SERVE, Type IV flags shall have embroidered on the scroll the major command The motto ribbon Type I flags shall Licensed by Information Handling Serviceseach end to attach the flag to a flagitaff. length of 2-1/2-inch-wide gold color rayon fringe stitched to top and bottom edges, fly end, and around
19、 ends of heading. The flag shall have a continuous *3.4.1 Design application, ribbon and scroll shall be identical on both sides of the flag,except the position of the anchor in relation to the globe shall be re- versed. The position of the eablem shall be such that a vertical line through the cente
20、r of the globe coincides with the vertical center of the finished flag, exclusive of the heading and fringe, and a horizontal line which equally divides the distancebetween top eiabroidered edge of horizontal center of the finished flag, exclusive of fringe, The 8111- broidered banner cloth for the
21、globe, motto ribbon hd scroll for both sides of the flag shll be appliqued back to back, the words reading from left to right on both sides of the flag and centered on the motto ribbon and scroll from top to bottom, be in their positions on both sides of the flag. On both sides of the flag, the eagl
22、e shall face the hoist end. the anchor shall-point downward from the northeast quarter to the southwest quarter on the front of the flag, and from the northwest quarter to the southeast quarter on the back of the flag, the ring and stock in the north. and the crown and flukes in the south,. The fron
23、t The appliqtaed and embroidered erblem, motto u I motto ribbon and bottom eabroidersd edge of scroll coincides with the The land areas on the.globe shall Ln relation to the globe, . 5 Licensed by Information Handling Services“3.5.1.3 Embroidery stitching. All embroidery stitching, except the out- l
24、ine stitching of notto ribbon, bottom scroll, globe, and horizontal lines on the globe, shall be a chain and texture type of Bonnaz stitching. The outline stitching of the globe, motto ribbon and scroll, and the horizontal lines on the globe shall be an imitation hand embroidery type of stitching. T
25、he stitch type, texture, density and colors for the various parts of the embroidery work shall conform to the standard sample. Bonnaz stitching shall be that type shown in the standard sample at the edging of the land areas on the globe, edging of the anchor, or in the wing feathefs of the eagle; th
26、e textured type of Bonnaz stitching shall be that type shown in the standard sample in the large gold color areas of the continents and anchor, outlining the globe and bottom scroll shall be made with 1/4-inch-long stitches, the lines on the globe shall be 3/16-inch-long stitches, and the outline ar
27、ound the motto ribbon shall be 1/8-inch-long stitches. Each horizontal line on the globe shall have a single row of No. 16 - Cable No. 67197 Putty HCW cotton thread sewn along the center of the line. The chain type of The imitation hand embroidery type of stitching *3.5.1.3.1 Letter stitching. All l
28、etters shall be embroidered with No. 10- Cable No. 67111,Scarlet HL,embroidery thread. the stitch type, texture and density of the embroidery work shall conform to the standard sample. height, and the letters for the motto ribbon shall be 112 inch in height, The style of the letters and Letters for
29、the bottom scroll shall be 2 inches in 6 Licensed by Information Handling Services- 3PN NO. 1. - 2. TABZE I MANUFACTURING REQUIREMENTS OPERATION Cutting. a. Cut the scarlet background cloth in a single piece suf- ficiently long to provide the required hems at the hoist and fly ends, and toprovide a
30、sufficient allowance for take- up of the cloth,. due to the embroidery and applique work, permitting the flag.-t finish to the required.length. The hoist of the flag shall be full width of the cloth, the selvage forming the top and bottom edges. globe, scroll and motto ribbon for both sides of the f
31、lag. Cut the cloth for the b. Cut the cotton flannel or cotton sheeting 6 inches wide and 53 inches long. c. Cut the leather tabs not less than 2 inches long and 3/4.;ri/6 irich wide with outer end rourided. Make a slit in each tab at the vertical center and 5/8 inch from.rounded end with a 118 inch
32、 diameter hole punched in the tabs at the end of the slit nearest the rounded end of the tabs. The combined slit and hole shall measure 314 21/16 inch long. Replacement of damaged parts a. Replace at time of cutting any part containing damages such as holes or serious weakening defects such as smash
33、es, multiple floats and clubs likey to develop into holes. Seam or Stitchg me titches Per Inch THRE lecdle obbin or ,ooper Licensed by Information Handling Services- OPN NO. 2. - 3. 4. 5. TABLE I MANUFA OPERATf ON Replacement of damaged parts (cone d) b. Replace any part damaged dur. ing the manufac
34、turing process b: needle chews which may be ex- pected to develop into a hole, scissors or knife cuts, tears, holes, mends or burns. Labeling. Finished appearance. The labe Finished appearance. The head- ing shall be of the tube or tur ne1 type. for the. insertion of i flagstaff. The flat width of t
35、he finished heading shall be 2-314 +il% inches wide. a. Fold the header lining 1/2 inch at eachend. Place this strip on the back of the flag at the hoist end with the fold- ed ends of the strip flush wit1 the selvage edges of the flag at the top and bottom, and at- tached thereto by a single row of
36、stitching across each foldec end of the strip. . b. Position the leather t-abs within the heading and center opposite the stitch-i-nng pf.the. hem with the rounded ends of tl tabs flush with the ends of thi heading. Stitch the tabs to the flag across their full wid at the square end by cross box sti
37、tching. URING ititch Type - 301 301 301 - 9 QUIREMEN iam or ititchg me SW-1 SSb-1 titchts Per Inch 12-16 12-16 12-16 + THRE ieedle B B B obbin or ooptr B B B Licensed by Information Handling ServicesMIL-F-L7577B 83 7779706 03Lbb5 T MIL-F- 19579BfMC) - DPN NO. 6. - 7. TABLE I b QPERAT ION Make headin
38、g. (cont d) C. Hem the hoist end of the flag with the lining strip inside and 1/4 inch turned under. Stitch with a double row of stitching, 1/8 inch gage, with outer seam 1/16 inch from edge. Stitching shall pass through the turned edge of the flag, both turned edges of the lining strip, and both ra
39、w ends of the fringe. Clean flag. a. Trim all ends of stitchings and remove all loose threads from the flag. and stains from the flag with- out injury to the material. Remove all spot UFACTI - Stitch Type - 301 16 VG REQUI Peoa or Stitchg me LScd-2 (a IENTS ititches Per Inch 12-16 THRI Seedle P B L
40、iobbin or ,ooper - B Licensed by Information Handling Servicesfringe. comparing the balance and symmetrical alignment of standard sample. of 22 inches shall be allowed on dimensions over 2 feet, inches shall be allowed for dimensions of less than 2 feet, Dimensional examination for the design and sc
41、roll shall be checked by A tolerance A tolerance of +1/4 * 3.7 Workmanship, grads of product established by this specification. defects shall not exceed the applicable quality levels(AQLs). The finished flags shall conform to the quality and The occurrence of 4. QUALITY ASSURANCE PROVISIONS *4.1 Res
42、ponsibility for inspection. Unless otherwise specified in the Except as contract or purchase order, the supplier is responsible for the per- formance of all inspection requirements as specified herein. otherwise specified in the contract or order, the supplier may use his own or any other facilities
43、 suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform
44、to prescribed requirements. submitted, the Governent reserves the right to check such items to de- termine the validity of the certification, *4.1.1 Certificate of compliance. Where certificates of compliance are *4.2.1 First article. When a first article is required, inspection and testing shall be
45、 performed on 8 completely fabricated flag for conformance to all provisions of this specification. components and materials shall be tested in accordance with all require- ments of referenced specifications, drawings, and standards, unless other- wise excluded, amended, modified or qualified in thi
46、s specification or applicable purchase document, components listed in Table II for characteristics noted. Wherever applic- able, tests shall be conducted in accordance with FED-STD-191. All re- quirements are applicable to- the sample unit. contain the individual values utilized in expressing the fi
47、nal results. specifications, sampling shall be in accordance with the following: *4,2,2 Component and material inspection. In accordance with 4.1 above, In addition, testing shall be performed on ?= All test reports shall *4.2.2.1 Sampling for testing. Unless otherwise specified in subsidiary Lot si
48、ze (lot unit) 800 or less 2 Sample size (sample unit) 801 to 22,000 inclusive 3 22,001 and over 5 Licensed by Information Handling ServicesLicensed by Information Handling ServicesU -c s +: QI a e Y s I c c i -v- i MIL-F-17579B 3 W 0b 03Lbb 5 W MI L-F- 19579B (MC) 8 fj In 6 3 cn ? c? M M N O a 9 8 M
49、 d k 4 a scarlet on other side to match base cloth). Fringe not neatly turned at corner. Raw edge of fringe not caught in X X heading stitching. Fringe not evenly attached to flag. Enble not clearly distinguishable. X The design and position of the appliqued and embroidered emblem, motto ribbon and scroll not identical on both sides of the flag (except that only the position of the anchor in relation to the globe will be reversed). Lettering not legible from left to X right. X Eagle does not face hoist end on both faces of flag. Execution o applique not
