1、* 1 MILITARY STANDARDIZATION HANDBOOK T L CODED LIST OF MATERIALS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-HDBK-223 HI M 7777770 0055433 2 M DEPARTMENT OF DEFENSE WASHINGTON, D.C. 20360 . . _ 3. The primary purpose of this handbook is to p
2、rovide a uniform basis with respect to type of material, form, shape and unit of.measure in the compu- tation and submission of material requirements which will be requested by separate instructions as the need arises. Every effort has been made to reflect the latest information on materials. It is
3、the intent to review this handbook periodically to insure its completeness and currency. Users of this document are encouraged to report any errors discovered and any recommendations for changes or inclusions to the Weapons Engineering Standardization Office (WESO), Attention: Code X-33, Naval Air E
4、ngineering Center, Philadelphia, Pennsylvania 19112. L P MILHDBK- 223 Coded List of Materials 1. This standardization handbook was developed by the Department of Defense and was approved on 8 December 1966 by .the Assistant Secretary of Defense (I Total Raw Stock Forms; Total (0121 + 0122 + 0124) Ca
5、sting Stock Forging Stock Ingots, Billets, Blooms and o-therraw stock forms, excluding Casting and Forging Stock Flat Rolled Products; Total (0131 +0132) Plate Sheet and strip Rod and Bar Products; Total Shapes, Rolled or Extruded; Total Pipe and Tubing; Total Wire and Wire Products; Total Iron Base
6、 Alloys Castings; Total Raw Stock Forms; Total (0321 + 0322 + 0324) Casting Stock .Forging Stock Ingots, Billets, Blooms and other raw stock forms, excluding Casting and Forging Stock Flat Rolled Products; Total (0331 + 0332) Plate Sheet and Strip Rod and Bar Products; Total Shapes, Rolled or Extrud
7、ed; Total Pipe and Tubing; Total Wire and Wir Products; Total Nickel Base Alloys Castings; Total Raw Stock Forms; Total (0521 + 0522 + 0524) Casting Stock Forging Stock Ingots, Billets, Blooms and other raw stock forms, excluding casting and forging stock Flat Rolled Products; Total (0531 + 0532) Pl
8、ate Sheet and Strip Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths, Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths, Pounds Ths. Pounds. Ths. Pounds Ths. Pounds Ths, Pounds Ths. Pounds Ths. Poundsi Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds. Ths. Pounds Ths. Pounds?
9、Ths. Pounds Ths, Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths, Pounds Ths. Pounds Ths. Pounds Ths. Pounds: Page 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-05 40 05 50 05 60 05 70 NOTE: 06 O0 06 O1 06 02 06
10、 03 07 O0 07 10 07 20 07 21 07 22 07 24 07 25 07 30 07 31 07 32 07 40 07 50 07 60 07 70 MIL-HDBK-223 NI M 7777970 0055439 3 M 1 c MISCELIANEOUS BASE METAL ALLOYS (continued) Rod and Bar Products; Total Shapes, Rolled or Extruded; Total Pipe and Tubing; Total Wire and Wire Products; Totai- Ths. Pound
11、s Ths. Pounds Ths. Pounds Ths. Pounds: . Use of the preceding for coding purposes is optional, depending on whether the individual establishment requires these codes to assist in identification of other materials. Requirements data 1 for the above codes will not be requested. Nickel Alloys (see defi
12、nition Page 3) Nickel Alloys 5.00 to 29.99 percent nickel Nickel Alloys 30.00 to 49.99 percent nickel Nickel Alloys 50.00 to 100 percentnickel content inclusive content inclusive content inclusive Titanium and Titanium Base Alloys Castings (Total) Raw Stock Forms (Except sponge) Total 0721, 0722, 07
13、24 and 0725 Casting Stock Forging Stock Ingots, Billets, Blooms, Slabs and other raw forms excluding casting and forging stock Powder (excluding Titanium Oxide) Flat Rolled Products; Total (0731 + 0732) Plate Sheet and Strip Rod and Bar Products; Total Shapes Rolled and Extruded; Total Pipe and Tubi
14、ng; Total Wire and Wire Products; Total Ths, Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths, Pounds Ths. Pounds Ths. Pounds c Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths, Pounds Ths. Poynds Ths, Pounds Ths. Pounds Ths. Pounds Page 2 Provided by IHSNot for ResaleNo reproduction or networking
15、permitted without license from IHS-,-,-MIL-HDBK-223 MI m 4- i Cobalt Ease Alloys: Iron Base Alloys: Nickel Base Alloys: Nickel Alloys: Titanium and Ti- tanium Base Alloys: 7777970 0055ql-10 T M INSTRUCTIONS AND DEFINITIONS MISCELLANEOUS BASE METAL ALLOYS GENERAL Alloys Containing cobalt as the princ
16、ipal or predominant element with 30 percent or more cobalt and less than 50 percent iron. Alloys containing less than 50 percent iron. These alloys contain iron as the principal or predominant element. This group includes heat and corrosion resistant alloys other than those classified as stainless s
17、teel. Alloys containing nickel as the predominant element with 30 percent or more nickel and less than 50 percent iron. “Nickel Alloys“ means those alloys for which the specified nickel content is 5 percent or more up to and including pure nickel, and which do not contain as much as 50 percent of ir
18、on or steel, nor as much as 40 percent of copper, nor as much as 50 percent of aluminum, in the following mill and foundry shapes and forms: Ingots, blooms, slabs, and billets. Plate, sheet, strip, and foil. Rods, bars, pipe, tubing, and shapes Wire and wire rod. Powder. Castings (less gates and ris
19、ers, rough Anodes (rolled or cast). (Rolled, drawn, or extruded). as cast). It also includes cast iron (less gates and risers, rough as cast) for which the specified nickel content is 5 percent or more, It does not include primary nickel in the forms of electrolytic cathodes, pigs, rondelles, cubes,
20、 pellets, shot, oxide (including sintered oxide), salts, or chemicals, nor does it include primary nickel in the forms of ingots or powder for remelting. Comprises commercial titanium metal and titanium base alloys which in general can be defined as containing 85 percent or more titanium. Page 3 Pro
21、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Castings: Forging Stock: Casting Stock: MIL-HDBK-223 HI m 7797770 005544I I DEFINITIONS OF FORMS AND SHAPES 1 C Are all castings before machining. Includes all ingots, billets, blooms, bars and other raw s
22、tock used in the fabriction of forgings. Includes all pig, ingot, and other raw stock forms used in the fabrication of castings, c Page 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-HDBK-223 MI W 9799970 00559LI2 3 W U T B. 10 O0 10 11 10 12
23、10 21 10 22 10 31 10 40 10 41 10 42 10 51 10 52 10 90 11 O0 11 10 11 20 11 30 11 50 11 90 12 O0 12 il 12 12 12 15 12 21 12 22 12 23 12 25 FERROUS METAIS STEEL Stainless Steel - Non-Nickel Bearing Castings . . Ingots, Billets, Blooms, and Related Products Bars, Cold Finished Bars, Hot Rolled Structur
24、al Shapes Pipe and Tubing (including Threaded Couplings) (excluding Wire Rods) (1041 + 1042) Welded (including Threaded Couplings) Seamless (including Threaded Couplings) Plates Sheet and Strip Wire Rods, Wire and Wire Products IRON Iron Gray Iron Castings Malleable and Ductile Iron Castings Alloy I
25、ron Castings Iron Powder Pure Iron STEEL Carbon Steel (Including Wrought Iron) Castings Ingots, Billets, Blooms, Slabs, and Related Products (excluding Wire Rods and Stock for Projectile and Shell Bodies) Billets, Stock for Projectile and Shell Bodies Bars, Cold Finished Bars, Hot Rolled (excluding
26、Stock for Projectile Bars, Reinforcing Bars, Hot Rolled, Stock for Projectile and Shell Bodies and Shell Bodies and Reinforcing Bars) Ths. Pounds Ths. Pounds Ths. Pouitds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Ths. Pounds Short Tons Short Tons
27、 Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Page 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-FERROUS METALS (continued) 12 31 12 32 12 40 12 41 12 42 12 43
28、 12 44 12 45 12 46 12 47 12 48 12 51 12 52 12 53 12 61 12 62 12 63 12 70 12 80 12 90 13 O0 13 11 13 12 13 14 13 15 13 16 13 17 13 21 13 22 13 31 Page 6 STEEL (continued) Structural Shapes Piling Pipe and Tubing (including threaded couplings) (Total of 1241-1248 incl. ) Welded (including threaded cou
29、plings, Seamless (including threaded couplings, excluding galvanized and/or ceramic coated) excluding galvanized and/or ceramic coated) Welded (including threaded couplings), galvanized Seamless (including threaded couplings), galvanized Welded (including threaded couplings, excluding galvanized) ce
30、ramic coated Seamless (including threaded couplings, excluding galvanized) ceramic coated Welded (including threaded couplings) galvanized ceramic coated Seamless (including threaded couplings) galvanized ceramic coated Plates (excluding Tin, Terne and Tin Mill Black Sheet and Strip (excluding galva
31、nized) Plate, Wide and Heavy (see definition page 13) Sheet,and Strip, galvanized Tin Plate, Terne Plate, and Tin Mill Black Plate Sheet and Strip, porcelain coated Rails and Track Accessories Wheels, Tires and Axles Wire Rods, Wire, and Wire Products Plate) (includes 1253) Alloy Steel (excluding St
32、ainless Steels) Castings (excluding Armor) Ingots, Billets, Blooms, Slabs, and Related Products (excluding Wire Rods) Castings, Armor (total of 1315, 1316, 1317) Castings, Armor, 300 pounds and under Castings, Armor, 300 - 1500 pounds Castings, Armor, 1500 pounds and over Bars, Cold Finished Bars, H
33、ot Rolled Structural Shapes Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short Tons Short To
34、ns Short Tons Short Tons Short Tons Short Tons Short Tons c Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M1L-HDBK-223 I FERROUS METALS (continued) i i 13 40 13 41 13 42 13 51 13 52 13 53 13 55 13 56 13 57 13 58 13 59 13 70 13 80 13 90 14 O0 14 11
35、14 12 14 21 14 22 14 31 14 40 14 41 14 42 14 51 14 52 14 90 STEEL (continued) Pipe and Tubing (including Threaded Couplings) (1341 + 1342) Welded (includng Threaded Couplings) Seamless (including Threaded Couplings) Plates (excluding Rolled Armor) (indudes 1353) Sheet and Strip Plate, Wide and Heavy
36、 (see also, in the case of cold-drawn and cold-rolled bars, to increase the yield and tensile strength. Bars, Hot Rolled:. Hot rolled bars are produced by hot rolling without subsequent processing for accuracy. of cross-section or to polish the surface. This category includes bar size shapes such as
37、 angles, channels, tees and zees, under 3 inches in the greatest cross-sectional dimension. It also includes rounds, half rounds, ovals, half ovals, squares (under 4 X 4 inches), flats, hexagons, octagons, and concrete reinforcement bars rolled from new billet, rail or axle steel, except carbon stee
38、l for shell bodies. Bars, Hot Rolled, Stock for Shell Bodies (Carbon Steel Only): Stock, under 2-7/8 inches (rounds, round cornered squares, etc. ) for projectile and shell bodies only. Structural Shapes: Structural shapes are rolled flanged sections (angles, channels, tees, zees, H or I shapes) hav
39、ing.at least one dimension of the cross-section 3 inches or greater. Steel sheet piling is a rolled steel shape having interlocks rolled integrally along the two edges for the purpose of inter- locking adjacent pieces together to form a continuous steel wall. Tubular products used for piling will be
40、 included under the “Pipe and Tubing“ category. Pipe and Tubing, including couplings: Hollow shapes (generally cylindrical, rec- tangular, or square) used for conveying gases, liquids and solids, and for a diversity of mechanical and structural purposes. Coupling: A device, usually cylindrical and t
41、hreaded, used for joining together two pieces of pipe or tubing. Welded *: Welded pipe and tubing is that which is pro- duced by shaping and welding of flat-rolled materials (skelp, plate, or strip). Seamless: Seamless pipe and tubing is that which is produced by piercing a solid ingot, bloom, bille
42、t, or tube round and subsequently hot rolling or drawing to desired size; or that which is formed by hot cupping flat plate and subsequently hot drawing to desired size. Piling: c Page 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-HDBK-223 H
43、I M 7777970 0055950 2 c - - Plates (Rolled Armor and other): Plates comprise flat, hot rolled finished steel products such as universal, sheared and continuous strip mill plates in the following ranges: Carbon Steel: O. 180 inches or thicker, over 48 inches wide. 7.53 pounds per square foot or heavi
44、er, over 9.62 pounds per square foot or heavier, over - . “ O. 230 inches or thicker, over 8 inches wide, 48 inches wide. 8 inches wide. Alloy Steel: O. 180 inches or thicker, over 48 inches wide. O. 230 inches or thicker, over 8 inches wide. 7.53 pounds per square foot or heavier, over 9.62 pounds
45、per square foot or heavier, over 48 inches wide. 8 inches wide. Stainless Steel3/16 inches (. 1875) or thicker, over 10 inches wide, Plate, Wide and Heavy: Plates which are either over 150 inches wide or over 30,000 pounds in weight. Sheet and Strip: Carbon and Alloy Steel: Flat rolled products whic
46、h include O. 2299 inches to and including O. 2031 inches thick, over 6 inches to and including 48 inches wide; O. 2030 inches to and including O. 1800 inches thick to and including 48 inches wide; under O. 1800 inches thick any width mill can produce. Stainless Steel: Flat rolled products which incl
47、ude all widths under 3/16 inch thickness. Sheet, Galvanized: Sheets, of any thickness or width, coated with zinc by electro- plating or by passing them, after pickling, through a bath of molten zinc. Galvanized sheets are a specialty and are not included in the standard classification by size and fl
48、at rolled steel products. Includes roofing, galvanized, corrugated, v crimp, channel drain, ridge roll (valley and flashing) and siding (corrugated and brick). Tin Plate, Terne Plate, and Tin Mill Black Plate: Cold Rolled tin mill black plate coated, after pickling, with commercially pure tin or wit
49、h terne metal, a lead-tin alloy. Tin Mill Black Plate: Flat rolled product O. 0141 inch and thinner in thickness and over 12 to 32 inches inclusive width. Page 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- “ MIL-HDBK-223 MI 997977O 0055453 L1 Rails and Track Accessories: Includes all rails, fish bars, fish plates, rail joints, splice
