1、AMSC N/A 1 of 3 FSC 4210DISTRIBUTION STATEMENT A. Approved for public release; distribution isunlimited.INCH-POUNDMIL-N-24408E(SH)AMENDMENT 128 February 2002MILITARY SPECIFICATIONNOZZLES, FIRE HOSE, COMBINATION AQUEOUS FILM FORMING FOAM, WATER SPRAY,ADJUSTABLE PATTERN (SHIPBOARD USE)This amendment f
2、orms a part of MIL-N-22408E(SH), dated 30 November 1994,and is approved for use by the Naval Sea Systems Command, Department of theNavy, and is available for use by all departments and agencies of theDepartment of Defense.PAGE 22.1.1: Under “SPECIFICATIONS, FEDERAL”, delete:“PPP-F-320 - Fiberboard,
3、Corrugated and Solid Sheet Stock (ContainerGrade), and Cut Shapes.”2.1.1: Under “SPECIFICATIONS, MILITARY”, delete:“MIL-P-116 - Preservation, Method of.”2.1.1: Under “STANDARDS, FEDERAL, FED-STD-H28/10”, delete “AmericanNational Hose Coupling and Fire-Hose Coupling Threads.” and substitute “ScrewThr
4、ead Standards for Federal Service Section 10 Hose Coupling and Fire HoseCoupling Screw Threads.”2.1.1: Under “STANDARDS, FEDERAL”, delete:“FED-STD-151 - Metals; Testing Methods.”2.1.1: Under “STANDARDS, MILITARY, MIL-STD-2073-1”, delete “DODMaterial Procedures for Development and Application of Pack
5、agingRequirements.” and substitute “Standard Practice for Military Packaging(Superseding MIL-STD-2073-2, MIL-STD-1510, MIL-P-116).”Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-N-24408E(SH)AMENDMENT 12PAGE 32.2: Under “AMERICAN SOCIETY FOR TEST
6、ING AND MATERIALS (ASTM) A 313”,delete:“Chromium Nickel” and “and Heat Resisting”.2.2: Under “AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A 580”,delete:“and Heat Resisting”.2.2: Under “AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)” andfollowing “B 62”, insert:“B 117 - Standard Specificatio
7、n for Operating Salt Spray (Fog)Apparatus.”2.2: Under “AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)” andfollowing B 584, insert:“B 783 - Standard Specification for Materials for Ferrous PowderMetallurgy (P/M) Structural Parts.”PAGE 42.2: Under “AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)”
8、 andfollowing D 4181, insert:“D 4727 - Standard Specification for Corrugated and Solid FiberboardSheet Stock (Contained Grade) and Cut Shapes.”PAGE 63.3.2: Delete and substitute:“3.3.2 Nozzle body and internal components. The nozzle body and allparts that are internal and in contact with the fluid f
9、low, unless otherwisespecified, shall be of bronze or stainless steel alloys. Bronze shall be inaccordance with alloy 836 of ASTM B 62 or ASTM B 505, alloy 642 of ASTM B 150,alloy 932 of SAE J462, or alloy 922 of ASTM B 584. Stainless steel alloysshall be 304 or 316 in accordance with ASTM A 580 or
10、ASTM B 783. Resinimpregnation is required on ASTM B 783 parts. See appendix B. See paragraph3.3.18 for internal spring material requirements.”3.3.6: Delete and substitute:“3.3.6 O-ring seals. O-ring seals shall be made of Viton,(fluorocarbon) or BUNA N (nitrile) elastomer material. Viton O-rings sha
11、llhave a Shore A durometer of 70 - 75, and be manufactured in accordance withMIL-R-83248. Buna N O-rings shall conform to type BF, BK, or CH of ASTMD 2000, with a 65-75 durometer hardness.”Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-N-24408E(
12、SH)AMENDMENT 133.3.7: Delete and substitute:“3.3.7 Bail handle. The handle shall be made of urethanethermoplastic, bronze or nylon. Urethane thermoplastic shall be black andconform to 2BG540B31F17, Shore D, of ASTM D 2000. Bronze shall be inaccordance with alloy 836 of ASTM B 62 or alloy 876 of ASTM
13、 B 584. Nylon shallbe black and in accordance with PA 162 of ASTM D 4066.”3.3.8, first sentence: Insert “black” between “of” and “Ethylene” andbetween “2000;” and “Nylon”.PAGE 73.3.14, line 3: Delete “Locktite” and substitute “Loctite”.3.3.15: Delete and substitute:“3.3.15 Gaskets. The female coupli
14、ng shall be furnished with a fittedgasket.”PAGE 124.7.1, line 3: Delete “FED-STD-151” and substitute “ASTM B 117”.PAGE 155.1.1.2, line 4: Delete “PPP-F-320” and substitute “ASTM D 4727”.PAGE 165.1.2.1, line 2: Delete “method III of MIL-P-116” and substitute “MIL-STD-2973-1”.PAGE 2120.1.2, line 5: Delete “DEPARTMETN” and substitute “DEPARTMENT”.Preparing activity:Navy-SH(Project 4210-0656)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
