1、 INCH - POUND I MIL-PRF-l769SB(SHIPS) AMENDMENT 1 19 March 1996 PERFORMANCE SPECIFICATION INSULATION TAPE, ELECTRICAL, FI- TYPE, FLAMEPROOF, SYNTHETIC This amendment forms a part of MIL-PRF-l7695B(SHIPS), dated 15 October 1968, and is approved for use by the Naval Sea Systems Command, Department of
2、the Navy, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 2.1: Delete “SPECIFICATION, MILITARY, MIL-E-17555 - Electronic and Electrical Equipment and Associated Repair Parts: Preparation for Delivery of.“ PAGE 2 Add as new paragraph: “3.3.6 SDecial marki
3、ng. Each roll shall be durably and legibly marked with the following, in such a manner that the markings will not become damaged when the packages are opened: (a) Date of manufacturer.JJ (b) Each packaged roll and shipping container shall be marked with the following CAUTION: “Store in original boxe
4、s and in a cool, dark location. store in close proximity to steam pipes, radiators or other sources of heat.“ Do not IJ Date of manufacture is defined as the distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-l7
5、695B(SHIPS) AMENDMENT 1 PAGE 3 Delete section 5 in its entirety and substitute: “5. PACKAGING 5.1 Packaeinq. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these per
6、sonnel need to contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activity within the Military Department or Defense Agency, or within the Military Departments Systems Command. Pack
7、aging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.“ 6.2: Add the following: “(c) Packaging requirements (see 5.1 and 6.5).“ PAGE 4 Add as new paragraph: “6.5 Sugg
8、ested Dackaeing. (The packaging requirements specified herein are suggested and apply only for direct Government procurements.) 6.5.1 Sub-contracted material and parts. The packaging requirements of referenced documents listed in Section 2 do not apply when material and parts are acquired by the sup
9、plier for incorporation into the equipment and lose their separate identity when the equipment is shipped. 6.5.2 Preservation. Dackinz. and marking. 6.5.2.1 The electrical insulating tape should be preserved, packed, and marked in accordance with MIL-E-17555 (see 3.3.6). rolls containing the length specified in 3.2.“ The tape should be wound in Preparing activity : Navy - SH (Project 5970-N680) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
