1、MIL-STD-1320 -25b m 99999LL 0434223 157 m MILITARY STANDARD MIL-STD-1320-256 TRU CK LO AD I N G NAVY) 13 AUGUST 1992 WARHEAD, HE. WDU-36/8 ON PALLET MK 12 MOD 1 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT UNIT LOAD DATA UNIT LOAD DOCUMENT . MIL-STO-1322-104 DIMENSIONS 52 L X 35 1/4 W X 22 i/2 H GRO
2、SS WEIGHT 1603 LBS A CUBE . 23.9 CU FT A DO NOT USE FOR SHIPPING WEIGHT FOR HAZARD CLASSIFICATIONS SEE NAVSEA OP 2165 AMSC NO. - N/A DISTRIBUTION STATEMENT A NOTES: APPROVE0 FOR PUBLIC RELEASE : DISTRIBUTION IS UNLIMITED. I. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. 2. FOR CROSS REFERENC
3、E TO ASSOCIATED PALLETIZING. CONTAINERLOADING AND CARLOADING MILITARY TOA SYSCOM STANDARDS, REFER TO INDEX TO STANDARDS. REV LTR APPROVAL REVISION DESCRIPTION DATE MIL-HDBK-236 INAVYI. AUTHORIZED AND RELEASED FOR HIGHWAY SHIPMENT ONLY. I a -/3 -9 L TUA. WPNSTA EARLE DATE S fGNA%hk-/ SEASYSCdI BY DIR
4、ECTION DATE ,/,/y/, -l AA 72- - i3 Y DATE ORIGINATOR WPNSTA EARLE. NEW JERSEY Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-L320 -25b W 99999LL 0434224 093 MIL-STD-1320-258 (NAVY) PAGE 2 GENERAL NOTES 1. THIS DOCUMENT GIVES DETAILED INSTRUC
5、TIONS FOR TRUCKLOADING DOMESTIC AND OVERSEAS UNIT LOADS OF THE WDU-36/B WARHEAD. THE UNIT LOAD SHALL BE IN ACCORDANCE WITH MIL-STD-1322-104 (NAVY). 2. THE PROCEDURES DESCRIBED HEREIN ARE INTENDED FOR 40 FT OR MNGER ENCLOSED TRAILERS WITH THE TRAILERS TANDEM AXLES LOCATED IN THE “WESTERN POSITION“ (A
6、T THE EXTREME REAR OF THE TRAILER). DO NOT USE TRAILERS WITH ALL METAL FLOORS. 3. WHEN THE SPACE BETWEEN THE MAD AND THE REAR OF THE TRAILER IS LESS THAN 12 INCHES, USE DETAIL C ON PAGE 3 AS THE REAR FILLER ASSEMBLY. WHEN THE SPACE IS BETWEEN 12 AND 36 INCHES, USE DETAIL B, PAGE 3. WHEN THE SPACE IS
7、 GREATER TIUN 36 INCHES, USE DETAIL J ON PAGE 6. DO NOT USE TRAILERS WITH ROLL UP DOORS. 4. THE REAR BLOCKING ASSEMBLY SHALL FILL THE SPACE BETWEEN THE LADING AND THE TRAILER DOORS WHEN THE DOORS ARE CLOSED (EXCEPT WHEN THE SPACE IS GREATER THAN 36 INCHES). 5. USE DETAIL A ON PAGE 3 AS THE FORWARD B
8、ULKHEAD ASSEMBLY WHEN USING 40 THROUGH 45 FT TRAILERS. FOR 48 FT TRAILERS, USE DETAIL G AS DIRECTED ON PAGES 4 AND 5. 6. THE MAXIMUM NUMBER OF UNIT LOADS THAT CAN BE LOADED ONTO A TRAILER IS: 40 FT TRAILER - 20 UNIT LOADS 42 FT TRAILER - 21 UNIT LOADS 44/45 FT TRAILER - 22 UNIT LOADS 48 FT TRAILER -
9、 24 UNIT MADS 7. DO NOT STACK UNIT LOADS. 8. UNLESS OTHERWISE SPECIFIED, DUNNAGE LUMBER, STEEL STRAPPING, STRAP SE3LS, AND NAILS SHALL BE AS SPECIFIED IN THE GENERAL TRUCKLOADING DOCMENT MIL-CTD-1320 (NAVY). 9. THE MAXIMUM GROSS WEIGHT OF THE TRACTOR-TRAILER AND THE ALLOWABLE AXLE WEIGHTS ARE THE RE
10、SPONSIBILITY OF THE CARRIER. THE CARRIER WILL ADVISE THE SHIPPER OF THESE LIMITATIONS, AND THE SHIPPER SHALL LOAD THE TRAILER IN SUCH A MANNER THAT THE TRACTOR-TRAILER WILL NOT EXCEED THESE LIMITATIONS. 10. AFTER THE BLOCKING AND BRACING HAS BEEN INSPECTED, ATTACH THE SHIPPING DOCUMENTS TO AN ACCESS
11、IBLE AREA INSIDE THE TRAILER. ATTACH THE PROPER EXPLOSIVES PLACARDS TO BOTH SIDES, FRONT, AND BACK OF THE TRAILER. 11. FOR GENERAL TRUCKLOADING PROCEDRES REFER TO THE GENERAL TRUCKLOADING DOCUMENT, MIL-STD-1320 (NAVY). TW = INSIDE TRAILER WIDTH 2 x 8 x 7 112 AS REQD 15 BACKUP CLEAT WOOD AS REQD 14 B
12、RACE (BACKUP) WOOD 2X8X30 AS REQD 13 BRACE (VERTICAL) WOOD 2 x 4 x 22 112 AS REQD 12 BRACE (FLOOR) WOOD 2X4X21 AS REDQ 11 BRACE (ANGLE) WOOD 2 X 6 TO SHAPE AS REQD 10 SLEEPER f END) WOOD 2 X 4 X 35 114 AS REQD19 I SLEEPER (SIDE) I WOOD 12X4X52 I 120 18 I VERTICAL (SIDE) I WOOD 12X4X221/2 I I LIST OF
13、 MATERIALS -1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. MIL-STD-I1320 -256 m 99999Ll 0434225 T2T m FTL 40 FT TRAILER (ENCLOSED) MIL-STD-1320-256 (NAVY) FORWARD BULKHEAD SEE DETAIL A 5&#/ ARROWS INDICATE NOSE END OF WARHEAD DETAIL 0 REAR FILLE
14、R ASSEMBLY USE TO FILL 9“ - 36“ GAP ASSEMBLE WITH 86 NAILS SIDE GATE FOR CHIMNEY PATTERN ASSEMBLE WITH 66 NAILS w DETAIL DETAIL REAR FILLER ASSPIBLY USE TO FILL O“ - 9“ GAP ASSEMBLE WITH 86 NAILS FORWPRD BULKHEAD ASSEMBLE WITH 86 NAILS PAGE 3 Provided by IHSNot for ResaleNo reproduction or networkin
15、g permitted without license from IHS-,-,-MIL-STD-1320 -25b = 9999933 043422b 9bb = * FTL 42, 44, 45, 48 FT TRAILER (ENCLOSED) MIL-STD-1320-256 (NAVY) FWD END OF TRAILER - 42 FT TRAILER (21 UNIT LOADS) PE I 44 45 Fr TRAILER (24 UNIT LOADS) LE DIMENSION X SEE NOTE 4RROWS INDICATE NOSE END OF WARHEAD B
16、ECAUSE WALL THICKNESSES VARY FROM TRAILER TO TRAILER, DIMENSION X IS TAKEN FROM THE OUTSIDE OF THE FRONT WALL To THE FORWARD MOST POINT OF THE LOAD. TO OBTAIN THE CORRECT DISTANCE FROM THE INSIDE OF THE FORWARD WALL TO THE FRONT OF THE LOAD, SUBTRACT THE FORWARD WALL THICKNESS FROM DIMENSION X. 1 4
17、PL PAGE 4 SECTION E - E BLOCKING FOR DOUBLE ROW PATTERN SECTION F - F BLOCKING FOR SINGLE ROW PATTARN 23 30 22 27 =.i 18 I ._ I BUTT AGAINST FRONT 20 OR LESS 1 I (USE DETAIL A * TW = INSIDE TRAILER WIDTH 4PL/ 84PL DETAIL FRONT BULKHEAD ASSEMBLY FOR 48 PT TRAILER WITH 21 OR MORE UNIT LOADS ASSEMBLE W
18、ITH 8d NAILS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320 -25b m LL 0434227 8T2 D tCtCCCCC cccccccc - MIL-STD-1320-258 (NAVY) LTL 40 THRU 48 FT TRAILER (ENCLOSED) 16 ,pwO END 40 FT TRAILER OP TRAILER “BER OF UNIT WADS cccccccc 15 OR L
19、ESS 44/45 FT TRAILER - FWD END 42 FT TRAILER OF TRIIILER “BER OF UNIT WADS 48 FT TRAILER (SEE TABLE ON SHEET 4) “1 t 23 I ARROWS INDICATE NOSE END OF WARHEAD PAGE 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-STD-L320 -25b m 99999LL 0434228 739 m MIL-STD1320-256 (NAVY) I SEE DETAIL A, SHEET 3 KNEE BRACE SEE DETAIL J DETAIL J KNEE BRACE ASSEMBLE WITH Ed NAILS AGE 6 PREPARING ACTIVITY: NAVY -OS (PROJECT NO. 8140-N9621 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
