1、J 4B e TDA SYSCOM DATE REV L TR APPROVAL REVISION DESCRIPTION . MIL-STD-1322 -104 81 W 9939911 0311b32 3bb = STANDARDS. REFER TO INDEX TO STANDARDS. MIL-HDBK-236 INAVYI. I FSC 814C MIL-STD-1322-104 NAVY) MILITARY STANDARD I NOVEMBER 1SSI UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT WARHEAD, HE, WDU-
2、36IB ON PALLET, MK 12 MOD 1 MIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR DEPOT HANDLING AND STORAGE AND FOR SHIPMENT BY COMMON CARRIER. &/&je& &/s/ TIJA. NWSE. WPNSTA EARLE DATE DATE 1th /9( - NUMBER OF WARHEADS PER UNK LOAD GROSS WEIGHT OF ONE WARHEAD WEIGHT OF BOTH WOOD FRAME ASSEMBLIES WEIGHT OF
3、STEEL STRAPPING (APPROX) WEIGHT OF PAUET (APPROX) GROSS WEIGHT OF UNK LOAD (APPROX) CUBE REQUIREMENTS FOR CONSTRUCTION OF MIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF MIL-Sl-1322 NAVY. ORIGINATOR , /u ZP !?/ DATE WPNSTA EARLE. NEW JERSEY I PAGE 1 OF 6 FOR HAZARD CLASSIFICATIO
4、N SEE OP2165 (1 OR 2)* =LBS 132 LBS 9LBS 72 LBS 1,603 LBS 23.9 CU Fr *SEE PAGE 6 UNIT LOAD. l.31 DIA AMSC NO. - N/A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-L322 -104 1 9999911 03Llb33 2T2 . 2 2 4 t 24 STRAP, LONGITUDINAL STEEL 1 114 X
5、 .O35 X 126 23 STRAP, LATERAL STEEL 11/4X.O35X6FT 22 BRACE, SIDE WOOD 2 X 4 X 17 314 MI L-STD- 1322-104 (NAVY) 1 1 1 PALLETIZING PROCEDURE: 20 CLEAT WOOD 2 x4 x 13 112 19 SUPPORT, FWD WOOD 4 X 6 X 16 112 18 SUPPORT, AFT WOOD 4 X 4 X 16 112 THREAD STRAPPING, ITEM 2, BETWEEN THE DECK WIRES OF THE PALL
6、ET, ITEM 1, AS SHOWN IN DETAIL A. THREAD LONGITUDINAL STRAPS, ITEM 2, UP THROUGH THE SQUARE OPENING AT THE FORWARD END OF ONE FRAME ASSEMBLY AND POSITION THE FRAME ASSEMBLY ON THE PALLET WITH THE AFT SUPPORT, ITEM 5, FLUSH WITH THE END OF THE PALLET. POSITION TWO WARHEADS IN THE FRAME ASSEMBLY AS SH
7、OWN IN DETAIL B WITH V GROOVE STRESS RISER FACING UP. POSITION THE SECOND FRAME ASSEMBLY, INVERTED, OVER THE WARHEADS IN LINE WITH THE BOTTOM FRAME ASSEMBLY. (SEE DETAIL C) THREAD STRAPPING, ITEM 2, UP THROUGH THE SOUARE OPENING OF THE TOP FRAME. TENSION OVER THE TOP FRAME AND DOUBLE NOTCH THE SEAL,
8、 ITEM 4. POSITION LATERAL STRAPS, ITEM 3, UNDER THE PALLET DECK AND OVER THE TOP FRAME. TENSION AND DOUBLE NOTCH THE SEALS, ITEM 4. SECURE LATERAL STRAPS, ITEM 3, TO THE TOP AND BOTTOM FRAMES WITH STAPLES, ITEM 15. AFTER UNIT LOAD IS ASSEMBLED, STENCIL IN A CONTRASTING COLOR ON BOTH LONGITUDINAL SID
9、ES OF THE UNIT LOAD, TEMPERATURE EXPOSURE LIMITS 140 F - 30 F“ (SEE DETAIL C). 2 DEPALLETIZING PROCEDURE: MARKING: (a) REMWSTAPLES. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, ) CUTANDEMWESlRWW. THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-129. 17 BATTEN, SIDE WOOD 2X4X
10、52 (C) REMOVE TOP FRAME ASSEMBLY. (d) REMOMWARHEADS. (e) REMOM BlTCM WE ASSEMBLY, AR I 15 I STAPLES NOTE: 1. UNLESS OTHERWISE SPECIFIED, ALL MATERIALS SHALL BE IN ACCORDANCE WITH MIL-STD-1322 (NAVY). 2. DO NOT USE TYPE 1 STRAPPING WITH POWER MACHINES. STEEL 1 1/48 SIZE PAGE 2 2 I AR I 26 I INKSTENCI
11、L I A-A-208 I TYPEIORm 12 CLEAT WOOD 2 x 4 x 14 1 12 I 4 I 25 I SEAL I STEEL 11 1/4 2 2 2 g BA1TEN WOOD 2X4X52 8 BATTEN WOOD 2X6X52 7 SIDE PIECE WOOD 2X4X52 1 1 I 21 I CLEAT I DETAIL J I 2 X 4 X 13 112 6 SUPPORT, FWD WOOD 4X4X32114 3 2 1 REQD 3 STRAP LATERAL STEEL 1 114 X ,035 X 10 Fi6 IN 2 Sm LONGI
12、TIDUAL STEEL 1 114 X .O35 X 12 Fr6 IN 1 MK 12 MOD 1 PALLET 2645217 35 x45 112 x4 314 ITEM DESCRIPTION MATLIDWG DIMENSIONS I AR I 13 I NAILCOMMON I STEEL I16d 1 1 I 10 I BATEN I WOOD I2x4x45 I5141 SEAL I STEEL Il 1I4SIzE Provided by IHSNot for ResaleNo reproduction or networking permitted without lic
13、ense from IHS-,-,-J a O a t MIL-STD-L322 -104 BL m 9999911 0333634 139 m MIL-STD-1322-104 NAWI DETAIL A EXPOWRE LIMITS 140-F -dF APPLICATION SEE NOTE h. REF: FRAME ASSY SEE PAGE 5 FOR CONSTRUCTION PAGE 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
14、,-MIL-STD-3322 -109 81 9999933 033Lb35 075 5 PLAN VIEW Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4 MIL-STD-1322 -104 Al 7777733 03lLb3b TO1 MIL-STD-1322-104 (NAVY) FRAME ASSY CONSTRUCTION FOR ONE WARHEAD (16 1/2) - F G b 21 SEE DETAIL J SECTION
15、 F-F REF ROTATED dCW ltL2 SUIT Tl, 2 1/2 2 DIA HOLE THRU / THRU ALTERNATE CONSTRUCTION SECTION G-G ROTATED 90 CCW SEMBLED VIEW 2) REQD 1-TOP 1-BOT (SEE PAGE 6 FOR UNITIZING PROCEDURE) DETAIL J PAGE f Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI
16、L-STD-1322 -104 1 9999911 0311637 948 9 c MIL-STD- 1322-104 (NAVY) PALLETIZING PROCEDURE FOR ONE WARHEAD: a. THREAD LONGITDUAL STRAPPING, ITEM 24, THROUGH THE 6TH & TTH WIRES OF PALLET AS SHOWN IN VIEW K. b. CENTRALLY LOCATE FRAME ASSY ON PALLET AS SHOWN IN VIEW K. c. THREAD STRAPPING, ITEM 24, THRO
17、UGH SLOTS IN FRAME ASSY. d. POSITION ONE WARHEAD IN THE FRAME ASSY AS SHOWN IN VIEW K “WITH V GROOVE STRESS RISER FACING UP“. e. NAIL (4) PC OF iTEM 22 TO LOWER PART OF FRAME ASSY W/3-1od NAILS/ BOARD IN APPROX POSITIONS SHOWN (SEE VIEW K). f. POSKION 2ND FRAME ASSY INVERTED OVER THE WARHEAD IN LINE
18、 WITH THE BOTTOM FRAME ASSY (SEE VIEW L). g. THREAD LATERAL STRAPPING, ITEM 23, UP THROUGH SQUARE OPENING IN THE PALLET AND OVER THE TOP FRAME ASSY. TENSION AND DOUBLE NOTCH SEALS, ITEM 25. h. AFTER ALL STRAPPING IS SEALED, NAIL TOP SECTION OF ITEM 22 TO TOP FRAME ASSY W/3-10d NAILS/BOARD AS SHOWN I
19、N VIEW L. j. SECURE STRAPPING TO KEMS 22 & 24 WITH 2 STAPLES/PC AS SHOWN IN VIEW L. SEE NOTE e ON PALLETIZING THREAD STRAPPING, BETWEEN THE 6TH AND TTH WIRES OF PALLET 2PL DE-PALLETIZING PROCEDURE a. CUT AND REMOVE STRAPPING. b. REMOVE TOP FRAME ASSY. d. REMOVE BOTTOM FRAME ASSY. c. REMOVE WAR HEAD. SEE NOTE h ON PALLETIZING 3 TEMPERRIRE EXPOSURE UMITS 1dF -36F UNITIZED LOAD REVIEW ACTIVITY: NAW-OS, AS PREPARING ACTIVIl: NAWQS (PROJECT NO. 8140N961) PAGE 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
