1、MIL-STD-1322 -55 1 7777713 0073056 2 I (+s”/-a/ MILITARY STANDARD MILLSTD-1322-5 5 3 December 1982 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT HAZARDOUS MATERIALS IN 55 GALLON STEEL DRUM PPP-D-729 TYPE Ip UNIT LOAD DATA GROS WEIGHT OF ONE CONTAINER (MAX) . 500 LBS. NUMBER OF CONTAINERS PER UNIT LOA
2、D . 4 WEIGHT OF PALLET AND DUNNAGE (ESTIMATED) . . , . 160 LBS. GROSS WEIGHT OF UNIT LOAD (ESTIMATED) .21M LBS. CUBE 60.8 CU. FT. DO NOT STACK MORE THAN 4 UNIT LOADS HIGH IN STORAGE. ( NOTES: 1. 2. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADING, C
3、ONTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX TO STANDARDS, MIL-HDBK- 236 (NAVY). DRUM, STEEL PPP-D-729 TYTEIP DOT TYPE 17H THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR DEPOT HANDLINGAND REQUIREMENTS FOR CONSTRUCTION OF THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATES
4、T STORAGE AND FOR SHIPMENT BY COMMON CARRIER. NAVAL WEA Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-STD-1322 -55 3 9777933 0073057 LI W MIL-STD-1322-55 PALLETIZING PROCEDURE (a) THREAD STRAPPING, ITEM 5, THROUGH SLOTS IN PALLET, ITEM 1, AS S
5、HOWN IN DETAIL A. b) POSITION PREFABRICATED BOTTOM FRAME ASSEMBLY ON PALLET DECK WITH EQUAL OVERHANG ON ALL SIDES, AS SHOWN. (C) CENTER DRUMS OVER SPACER CLEATS, ITEM 12AND 13 IN BOTTOM FRAME. pFJ RIMS OF DRUMS MUST SIT FIRMLY ON BATTENS, ITEM 9, OFBOTTOM FRAME (4 PLACE TOP FRAME ASSEMBLY OVER DRUMS
6、. ASCERTAIN PRESENCE OF GIRTHWISE STRAPPING ON TOP AND BOTTOM FRAMES. (e) POSITION STRAPPING, ITEM 5, AROUND UNIT LOAD, TENSION AND DOUBLE NOTCH SEAL, ITEM 7. (9 POSITION STRAPPING, ITEM 6, UNDER PALLET DECK, AROUND UNIT LOAD, TENSION AND DOUBLE NOTCH SEAL, (s) SECURE ALL STRAPPING TO TOP AND BOTTOM
7、 FRAMES WITH STAPLE, ITEM 8, AS SHOWN. MARKING: IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322. DETAIL NOTES: A5 NAIL, BOX, Pd NAIL, BOX, M REOD AS REQD l6 l5 STANDARD STANDARD I 5 I 14 I TOPBATTEN I SEE FIELD NOTES Il X 6
8、X 50 I I 1 1. WHEN MIL-P-15011 PALLET IS NOT AVAILABLE, WOOD PALLET 13 I SPACERCLEAT I SEE FIELD NOTES 516 X NN-P-71, TYPET, SIZE 2, GROUPE, OREMAY BE USED. COLD ROLLED, HEAT TREATED .O31 STRAPPING MAY BE USED. UNLESS OTHERWISE SPECIFIED ALL MATERIALS SHALL BE IN ACCORDANCE WITH MIL-STD-1322. END BA
9、TTEN 2. 3. 5 DEPALLETIZING PROCEDURE (a) REMOVE STAPLES. b) CUT AND REMOVE STRAPPING. (c) REMOVE TOP FRAME. REMOVE DRUMS. REMOVE BOTTOM FRAME. I 24 I 8 I STAPLE I FOR STEEL STRAP 13/4 FOR STEEL STRAP 6 7 SEAL SEE NOTE 2 4 6 STRAPPING 2 5 STRAPPING SEE NOTE 2 3/4 X 22 GA. MIN 15 FT 6 3/4 x .o35 x I F
10、OR STEEL STRAP 11 1/4 FOR STEEL STRAP SEE NOTE 2 1 1/4 X 22 GA. MI1 STRAPPING PALLET SEE NOTE 1 40 x 48 x 5 1/2 REQD ITEM DESCRIPTION MAfL/DWG DIMENSION! I LIST OF MATERIALS e Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I BOTTOM FRAME ASSEMBLY BOTTOM FRAME ASSEE R I BLY REVIEW ACTIVITY: NAVY-QS, AS , PREPARING ACTIVITY: NAVY-OS (PROJECT NO. 8140-N 577) I PAGE 3 x ,- . P *US. GOVERNMENT PRINTING OFFICE 1983-605-034/431 / _. A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
