1、MIL-STD-1322 -bL 1 W 79797LL 0073072 O W - (I B 4- 37- 07 MILITARY STANDARD MIL-STD-1322-61 UNIT LOAD (NAVY) 2 MAY 1984 FOR DOMESTIC AND OVERSEAS SHIPMENT SLMM EXPLOSIVE SECTION MK 13 MOD O IN CONTAINER MK 639 MOD-O UNIT LOAD DATA DODINALCNO. 060) NUMBER OF CONTROL SECTIONS PER CONTAINER . 1 4 4 NUM
2、BER OF CONTAINERS PER UNIT LOAD . NUMBER OF CONTROL SECTIONS PER UNIT LOAD GROSS WEIGHT OF ONE CONTAINER . WEIGHT OF PALLET 605 LES. 90 LBS. 14 LES. 6-4 LBS. WEIGHT OF STRAPPING WEIGHT OF FRAMES GROSS WEIGHT OF UNIT LOAD 2,590 L6S.A CUBE . .86.5 CU. FT. DO NOT USE FOR SHIPPING WEIGHT NOTES: PACKING
3、AND SHIPPING CONDITION 53711-mo314e CONTAINER, 639 MOD o DO NOT STACK MORE THAN 3 UNIT LOADS HIGH IN STORAGE 1. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. 2. FOR CROSS REFERENC TO ASSOCIATED TRUCKLOADING, CONTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX STANDARDS, MIL- HD
4、BK- 236 (NAVY). REQUIREMENTS FOR CONSTRUCTION OF THIS- UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR DEPOT HANDLC-AND STORAGE AND FOR SHIPPMENT BY COMMON CARRIER. Provided by IHSNot for ResaleNo reproduction or networking permitted without lice
5、nse from IHS-,-,-MIL-STD-33S2 -bl 83 = 7777733 0073073 2 =! M IL-STD-1322-61 (NAVY) PA LLETI Z I N G DETAILS BOTTOM FRAME ASSEMBLY (I REQUIRED) f Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3322 -b3 8% 9449713 0073074 4 f c Y MIL-STD-1322
6、-61 (NAVY) PALLETIZ IN G PROCEDU RE (a) THREAD STRAPPNG, ITEM 2, THROUGH SLOTS IN PALLET DECK, ITEM I, AS SHOW N DETAIL A. (b) POSITION GIRTHWISE STRAPPNG, ITEM 4, AROUND THE PREFABRICATED BOTTOM FRAME ASSEMBLY, TENSION AND DOUBLE NOTCH SEAL, ITEM 5. (c) POSITION THE BOTTOM FRAME ASSEMBLY ON THE PAL
7、LET DECK WITH EQUAL OVERHANG ON BOTH SIDES AND ENDS, POSITION THE CONTANERS ON THEBOTTOM FRAME, AS SHOWN. (d) PLACE THE TOP FRAME ASSEMBLY ON THE CONTAINERS, ASCERTAIN THE PRESENCE OF THE GIRTHWISE STRAPPING BEFORE POSITIONING THETOP FRAME. (e) POSITION STRAPPING, ITEM 2, AROUND THE UNIT LOAD, TENSI
8、ON AND DOUBLE NOTCH SEAL. (f) POSITION STRAPPING, ITEM 3, UNDER THE PALLET DECK AND AROUND THE UNIT LOAD, TENSION AND DOUBLE NOTCH SEAL. (s) SECURE STRAPPING WITH STAPLES, ITEM 6, AS SHOWN. MARKING: IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT ORORDER, THE UNIT LOAD SHALL BE MARKED IN ACC
9、ORDANCE WITH MIL-STD-1322. NOTES: I. WHEN PALLET MIL-P-15011 IS NOT AVAILABLE, WOOD PALLET NN-P-71, TYPET, SIZE 2, GROUP III OR= MAY BE USED. DO NOT USE TYPE I STRAPPING WITH POWER MACHINE. ALL MATERIALS SHALL BE AS SPECIFIED IN MIL-STD-1322. 2. 3. DEPALLETIZ ING PROCEDU RE (o) REMOVE STAPLES, b) CU
10、T AND REMOVE STRAPPING. DO NOT REMOVE GIRTH STRAPS. (c) REMOVE TOP FRAME. (d) REMOVE CONTAINERS. (e) REMOVE BOTTOM FRAME. 40 314 Y 3PERJOINT TOP FRAME ASSEMBLY (I REQUIRED) 1 I; I NAIL, STANDARDBOX 1 SE NOTE 3 1 REQD NAIL, STANDARD BOX SPACER IX4X36 IO 9 BATTEN I X 6 X4 3/4 4 8 ENDPIECE I x4x471/4 I 1/4 I 1/4 I l/4 X .O35 X 18i I i/4 x .035x I9 I l/4 X .O35 X 19 40 x 48 x 5 l/2 DIMENSION REVIEW ACTIVITY: NAVY -OS, AS PAGE 3 PREPARING ACTIVITY: NAW-OS (PROJECT NO. 8140- N 607) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
