1、MILITARY STANDARD MIL-STD-1322-62 (NAVY) 25 April 1954 . UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT SLMM EXERCISE HEAD MK91 MOD 0 IN CONTAINER MK 639 MOD O. UNIT LOAD DATA DODIWE.(ALCNO. UBD) NUMBER OF CONTROL SECTIONS PER CONTAINER . 1 4 4 . NUMBER OF CONTAINERS PERUNIT LOAD NUMBER OF CONTROL SEC
2、TIONS PER UNIT LOAD GROSS WEIGHT OF ONE CONTAINER WEIGHT OF PALLET . WEIGHT OF STRAPPING . 775 LBS. 90 LBS. 14 LBS. . WEIGHT OF FRAMES 64 LBS. GROSS WEIGHT OF UNIT LOAD CUBE 85.5 CU. FT. . 3,270 1BS.A A DO NOT USE FOR SHIPPING WEIGHT PACKING AND SHIPPING CONDI1 CONTAINER, MK639 MCD O 53711-5003l48 D
3、O NOT STACK MORE THAN 3 UNIT LOADS HIGH IN STORAGE NOTES: I. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. 2. FOR CROSS REFERANCE TO ASSOCIATED TRUCKLOADING, CONTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX TO STANDARDS, MIL-HDBK-236 NAVY). ICN THIS UNIT LOAD IS AUTHORIZED A
4、ND RELEASED &OR DEPOTHANDLINGAND STORAGE AND FOR SHIPPMENT BY COMMON CARRIER. REG? U I REM ENTS FOR CONSTRUCTION OF-THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF MIL-STD-1322. ORIGINATOR l(&!-& I (, . A- ay NAVAL WEAPONS &ING CENTER WPNSTA EARLE, NEW JERSEY 1- Provided by IHS
5、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3322 -62 1 W 7797933 0073077 T U MIL-STD-1322-62 (NAVY) PALLETIZING DETAILS BOTTOM FRAME ASSEMBLY (1 REQUIRED) I PAGE 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
6、 IHS-,-,-MIL-STD-1322 -62 1 7777711 007L07 1 .MIL-STD-1322-62 (NAVY) PALLETIZING PROCEDURE (a) THREAD STRAPPING, ITEM 2, THROUGH SLOTS IN PALLET DECK, ITEM I, AS SHOWN N DETAIL A. b) POSITION GIRTH WISE STRAPPING, ITEM 4, AROUND THE PREFABRICATED BOTTOM FRAME ASSEMBLY, TENSION AND DOUBLE NOTCH SEAL,
7、 ITEM 5. (c) POSITION THE BOTTOM FRAME ASSEMBLY ON THE PALLET DECK WITH EQUAL OVERHANG ON BOTH SIDES AND ENDS, POSITION THE CONTAINERS ON THE BOTTOM FRAME, AS SHOWN. (d) PLACE THE TOP FRAME ASSWBLY ON THE CONTAINERS, ASCERTAIN THE PRESENCE OF THE GIRTHWISE STRAPPING BEFORE POSITIONING THETOP FRAME.
8、e) POSITION STRAPPING, ITEM 2, AROUND THE UNIT LOAD, TENSION AND DOUBLE NOTCH SEAL. (f) POSITION STRAPPING, ITEM 3, UNDERTHE PALLET DECK AND AROUND THE UNIT LOAD, TENSION AND DOUBLE NOTCH SEAL. s) SECURE STRAPPING WITH STAPLES, ITEM 6, AS SHOWN. MARKING: IN ADDITION TO ANY SPECIAL MARKING REQUIRED
9、BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322. NOTES: I, WHEN PALLET MIL-P-I5011 IS NOT AVAILABLE, WOOD PALLET NN-P-?II, TYPEY, SIZE 2, GROUPIEORm MAY BE USED. DO NOT USE TYPE I STRAPPING WITH POWERMACHINE. ALL MATERIALS SHALL BE AS SPECIFIED IN 2. 3. ? MIL-STD-
10、1322. DEPALLETIZING PROCEDURE (o) REMOVE STAPLES. g) CUI AND REMOVS STRAPPING. DO NOT REMOVE GIRTH STRAPS. (c) REMOVE TOP FRAME. (d) REMOVE CONTAINERS. (e) REMOVE BOTTOM FRAME. TOP FRAME ASSEMBLY (I REQUIRED) 40 x 48 x 5 l/2 I I PALLET, WOOD SEE NOTE I REQ?D ITEM DESCRIPTION MAT?L/DWG DIMENSION LIST OF MATERIALS REVIEW ACTIVITY: NAVY -OS, AS PAGE 3 PREPARING ACTIVITY: NAW-OS (PROJECT NO, 8140-N Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
