1、I iLhtD 1320 -2 1325-28 UNIT LOAD DATA I 2. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. TRUCKLOADING THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR UEPOT HANDLING CARLOADING AWD STORAGE ANO FOR SHIPMENT BY COMMON CARRIER. MIL-STD- 1322- 7 4 1 (Navy) Deportment of the Navy AU -US* 1?9 PALLETI
2、ZING DOMESTIC UNIT LOAD 509 LB. FIRE BOMB MK 77 MOD 2 (EMPTY) (IN GIKEBOUNC CRATE) THIS DOCUMENT CONTAINS 3 PAGES. N: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3322 -743 Bl m 7777733 0073333 7 = MIL-STD-1322-741 (Navy) PALLETIZING PROCE
3、DURE .i, R.lgLla- 2qc.y (a) TIE THE TWO PALLETS, ITEM 1. TOGETHER WITH STRAPPING, ITEM 2, ALONG THE WIDTHWISE (b) THREAD STRAPPING, ITEM 3, THROUGH DECK WIRES OF PALLET, AS SHOWN IN DETAIL B. c) PLACE SIX CONTAINERS ON PALLET AND POSITION STRAPPING, ITEM 3. AROUND THE UNIT (d) POSITION STRAPPING, IT
4、EM 4, UNDER THE PALLET DECK AND AROUND UNIT LOAD, TENSION (e) SECURE STRAPPING, ITEM 4, WITH STAPLES, ITEM 6, TO THE CLEATS OF THE CONTAINER AS SHOWN. (I) THREAD STRAPPING, ITEM 7, UNDER AND THROUGH THE TOP CONTAINERS. (9) PLACE TWO ADDITIONAL CONTAINERS ON THE UNIT LOAD, TENSION STRAPPING, ITEM 7,
5、AND (h) SECURE STRAPPING, ITEM 7, WITH STAPLES, ITEM 6, TO THE TOP CLEAT OF THE THIRD LAYER DIMENSION, AS SHOWN IN DETAIL A. LOAD, TENSION AND DOUBLE CRIMP SEAL, ITEM 5. AND DOUBLE CRIMP SEAL. DOUBLE CRIMP SEAL, ITEM 5. OFCONTAINERS ANDTHE TOP AND BOTTOMCLEATDF THE FOURTH LAYEROFCONTAINERS, AS SHOWN
6、. MAR KING: IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129, DEPALLETIZING PROCEDURE (a) WHEN A FLEET ISSUE UNIT LOAD IS REQUIRED,REMOVE THE STAPLES SECURING THE TOP TWO CONTAINERS. (b) CUT AND REMOVE STRAPPING, ITEM 7. (e) R
7、EMOVE THE TOP TWO CONTAINERS. (d) WHEN IT IS DESIRED TO DEPALLETIZE THE REMAINING FLEET ISSUE UNIT LOAD, REMOVE THE STAPLES. (e) CUT AND REMOVE THE STRAPPING, ITEM 3 AND.4. (f) REMOVE CONTAINERS. (9) CUT AND REMOVE STRAPPING, ITEM 2. .O31 COLD ROLLED, HEAT TREATED MAY BE SUBSTITUTED. I I MK3MODO I I
8、 I REQ.(ITEhi1DESCRIPTiON I MATL. I MATL. SPEC, DIMENSI01 LIST OF MATERIALS SHEET 2 OF 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1322-741 (Navy) IL+. AtlsSt, 1969 ASSEMBLED UNIT LOAD DETAIL 0 SEE DETAIL 0 SHEET 3 OF 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
