1、MIL-STD- 1.322-742 (Navy) Department of the Navy AQgJat 1969 I QALLETIZING DOMESTIC UNIT LOAD ARMING DEVICE MK 10 MOD O OR MK 11 MOD O (IN WOOD BOX) I320 -3 I325 - 100 5L0 c TRUCKLOADING CARLOADINO THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR DEPOT HANOLING ANO STORAQE AN0 FOR SHIPMENT BY COMMON CA
2、RRIER IN COMPLIANCE WITH DOT REGULATIONS. SHEET I OF 2 UNIT LOAD DATA NUMBER OF ARMING DEVICES PER CONTAINER 4 NUMBER OF CONTAINERS PER UNIT LOAD . 16 12 NUMBER OF ARMING DEVICES PER UNIT LOAD. 64 GROSS WEIGHT OF ONE CONTAINER (EST.) (Lbs.) 70 90 GROSS WEIGHT OF UNIT LOAD (EST.) . (Lbs.) 1210 58.5 D
3、O NOT STACK MORE THAN 3 UNIT LOADS HIGH IN STORAGE. CLASS A EXPLOSIVES WEIGHT OF PALLET . (Lbs.) CUBE _ . _ . (Cu. Ft.) CONTAINER DWG 10001 -1 476276 NOTES : I. FOR OENERAL PALLETIZINB REQUIREMENTS SEE MIL-STO-i322 (NAVY). 2. UNLESI OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. 1 ASSOCIATE PROCESS I
4、 o. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1322 -742 B3 7777733 0073336 2 MIL-STD-1322-742 (Navy) U. Auk-ust 1969 PALLETIZING PROCEDURE (a) THREAD STRAPPING, ITEM 2, THROUGH SLOTS IN PALLET, ITEM 1, AS SHOWN IN DETAIL A. (b) PLACE TH
5、E CONTAINERS ON THE PALLETDECK WITH TOP CLEATS ON THE INSIDE. (E) POSITION STRAPPING, ITEM 2, AROUND THE UNIT LOAD, TENSION AND DOUBLE CRIMP SEAL. ITEM 4. (d) POSITION STRAPPING, ITEM 3, UNDER THE PALLET DECK AND AROUND THE UNIT MARKING: LOAD, TENSION AND DOUBLE CRIMP SEAL. IN ADDITION TO ANY SPECIA
6、L MARKING REQUIRED BY CONTRACT OR ORDER, UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DETAIL 0 DEPALLETIZING SEE DETAILQ (a) CUT AND REMOVE STRAPPING. (b) REMOVE CONTAINERS. NOTES: #HEET 2 OF 2 E.- :. “ 1. WHEN PALLET MIL-Pa15011 IS NOT AVAILABLE - MIL-P-3938MAY BE USED AS AN ALTERNATE PALLET. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
