1、i L /- I MINE MK 55 MOD 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 , CONFIG- GROSS WEIGH URATION CRATED MINE E 2185 C 2163 0 2155 B 2263 C 2229 D 2221 B 2276 C 2239 D 2231 B 21.58 C 2160 D 2135 8 2422 C 2236 D 2232 . MILITARY STANDARD MIL-STD-13 23-209 (NAVY) UNIT LOAD FOR UNDERWAY REPLENISHMENT MINE, UNDERWATER
2、 MK 55 AND MODS. . 2 DECEMBER 1982 SUPERSEDING WR-54/205 15 FEERUARY 1973 CONFIGURATIONS iig:ff C“ AND“ D“ IN CRATE MK 55 MOD 1 WITH CRATE ADAPTERS MK 112 MOD o (LOADED) UNIT LOAD DATA - DODIC/ JALC NO u 875 U 876 U 877 u 687 UB88 U669 U899 Up00 up01 U 911 U 912 U 913 U 923 U 924 U 925 U929 u 930 U
3、 931 u 935 u 936 u 937 - - APPROX) LBS UNIT LOAD 2335 2313 2305 2413 2379 2371 2426 2339 2381 2318 2310 2285 2572 2386 2382 25x) 2397 2382 2475 2465 2435 NUMBER OF MINES UNIT LOAD . 1 WEIGHT OF TWO CRATE ADAPTERS (ESTIMATED) 150 LBs CVBE . 45.0 CU. FI. UNIT LOAD DIMENSIONS 84 L X 28 3/4 W X 32 1/4 H
4、 . DO NOT STACK MORE THAN 5 UNIT LOADS HIGH IN STORAGE HAZARD CWSIFICATION DOT-CWS A CG -CLASS X-A CRATE, MK 55 MOD 1 1O001-2202643 NOTES: (LDm CRATE ADAPTER, MK 112 MOD O I. WHENMK 112ADAPTERS ARE NOT AVAILABLE, USE MIL-STD-1322-714. 2. UNLESS OTHERWISE SPECKED DWNSIONS ARE IN INCHES. 3. FOR CROSS
5、REFERENCE TO ASSOCLATED TRUCKLOADING, CONTAINERLOADING AND IO001 - 2644678 WWPING , HANDLING STORAGE AND TBANSFER -AT-Sd. IT MAY ALSO BE USED FOR THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE DOMESTIC SHIPMENT IN COMPWNCE Wmi DOT REGULATtONS. Provided by IHSNot for ResaleNo repr
6、oduction or networking permitted without license from IHS-,-,-1 MIL-STD-3323 -207 83 7777733 00714b4 b MIL-STO-13 23-209 (NAVY) - ASSEMBLY DETAILS mow (4) - h-20 UNF XEWS FROM ADAPTER AND MATCH DRILL 8OllOM WELDMENT WITH ADAPTER .SI:% DIA. 4 PLACES EACH ADAPTER IN LOCATION SHOWN. SECURE ADAPTER ON O
7、UISIDE BOTTOM WELDMEM. 4 HOLES TOP AND SIDE VIEW OF BOTTOM SECTION PAGE Z I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1323 -209 81 W 9999911 00719b5 8 = 7 MIL-STD-13 23-209 (NAVY) ASSEMBLING PROCEDURE TO FACILITATE INSTALLATION OF THEAD
8、APTERS, ITEM 1, REMOVE THE MINE FROM THE CRATE. (a) REMOVE THE SELF- LOCKING NUTS AND SCREWS FROM THE ADAPTER. POSITION THE BOTTOM FRAME IN A CONVENIENT PLACE AND MATCH DRILL FOUR 531 DIA. HOLES THRU THE BOTTOM ANGLE IN THE LOCATIONS INDICATED IN THE TOP VIEW ILLUSTRATION, ON PAGE 2. ) SECURE THE AD
9、APTER TO THE BOTTOM SECTION IN THE POSITION SHOWN IN THE TOP VIMI ILLUSTRATION, AND IN DETAIL A. (e) REPEAT PROCEDURES (a) AND ) FOR THE SECOND ADAPTER AND POSITION AS SHOWN IN THE TOP VIEW ILLUSTRATION. (d) DRILL TWO 331 DIA HOLES IN THE TOP SECTION IN POSITIONS SHOWN IN THE ILLUSTRATION ON PAGE 3.
10、 INSERT THE HEX HEAD CAP SCRRV , ITEM 2, AND SECURE WITH SELF-LOCKING NUT, ITEM 3, AS SHOWN, (e) POSITION THE MINE IN THE BOTTOM SECTION AND ALIGN THE TOP SECTION WITH THE BOTTOM. SECURE THE TOP AND BOTTOM SECTIONS. TO STACK THE MINE CRATES IN STORAGE THE HOLES IN THE FORK POCKETS OF THE ADAPTER MUS
11、T BE ALIGNED WITH THE CAP SCREWS AND SELF-LOCKING NUTS IN- STALLED IN THE TOP SECTION. 1.06 2 HOLES FOR 1/2- 13 UNC X 375 LONG HEX HD CAP SCREW WITH 1/2- 13 UNC T SELF LOCKING NUT MOUNTED NOTES: 1. 2. CAP SCREWS AND SELF - LOCKING NUTS ARE SUPPLIED WITH THE ADAPTER . UNLESS OTHERWISESPECIFIED, ALL M
12、ATERIALS WILL BE IN ACCORDANCE WITH MIL - STD - 1323 . 3 NUT, SELF - LOCKING SE NOTE 2 1/2 - 13 UNC 2 1 2 =ISCREW,CAP,HEXHEAD I SEE NOTE 2 11/2-13UNCX.875 L I REQD I ITEM I DESCRIPTION IMATI/DWGIDIMENSIONSI I LIST OF MATERIALS I PREPARING ACTNITY : t NAW - OS REVIEW ACTIVITY: NAVY-OS . . . . . . - - (PROJECT NO. 8140-NW) PAGE 3 *U$. GOVERNMENT PRINTING OFFICE: 1983-605-034/429 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
