1、MIL-T-qL82H 84 m 9797706 039LLi95 b m ! -24 -0 5- MIL-T-41828H SUPERSEDING MIL-T-41828G 20 May 1982 22 October 1987 MILITARY SPECIFICATION TROUSERS, MENS, POLYESTER/WOOL This specification is approved for use by all Departments and Agencies of the ? For Clothing, Equipage, and Tentage, Construction,
2、 2 Way and 4 Way (Partial) (General Use) - Pallets, Material Handling, Wood Post Construction, - Box, Shipping, Fiberboard (Modular Sizes) - Cloth, Tropical : Wool; Polyester/Wool - Cloth, Tropical, Polyester and Wool - Thread, Polyester Core: Cotton-, Rayon-, or - Cloth, Polyester; Polyester and Co
3、tton; Polyester - Cloth Interlining, Cotton or Synthetic, and Nylon - Ethanolamines (Monoethanolamine, Diethanolamine, - Cloth, Serge, Polyester, Texturized 4 Way Entry Polyester-Covered and Rayon, For Pockets and Triethanolamine), Technical 2 Provided by IHSNot for ResaleNo reproduction or networki
4、ng permitted without license from IHS-,-,-MIL-T-43828H 4 m 777770b 0373477 T m ,* MIL-T-41828H STANDARDS FEDERAL FED-STD-751 - Stitches, Seams, and Stitchings MILITARY *MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MIL-STD-129 - Marking for Shipment and Storage *MIL-STD-1
5、47 - Palletized Unit Loads MIL-STD-1488 - Provisions for Evaluating Quality of Trousers ( Copies of specifications, standards, drawings, and publications required by i. contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the
6、contracting officer.) 2.1.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this specification to the extent specified herein. Unless otherwise specified, the issues shall be those in effect on the date of th
7、e solicitation. LAWS AND REGULATIONS US Postal Service Manual (Copies of the manual may be obtained from the Superintendent of Documents, US Government Printing Office, Washington, DC 20402-0001.) 2.2 Other. publications. The following document(s) form a part of this specification to the extent spec
8、ified herein. Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the DODLSS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issue of the nongovernment documents w
9、hich is current on the date of the sol i ci tat ion. NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION, INC., AGENT Nat ional Mot or Freight C1 ass if icat ion (Applications for copies should be addressed to the American Trucking Association, ATTN: Traffic Department, 1616 P Street, N.W., Washington, DC 20
10、036-1404). UNIFORM CLASSIFICATION COMMITTEE, AGENT Uniform Freight Classification . (Applications for copies should be addressed to the Uniform Classification Committee, Room 1106, 222 South Riverside Plaza, Chicago, Illinois 60606-5808). a 3 Provided by IHSNot for ResaleNo reproduction or networkin
11、g permitted without license from IHS-,-,-MIL-T-41828H *THE COLOR ASSOCIATION OF THE UNITED STATES Standard Shades for Buttons - 1966 Standard Shades for Threads - 1968 (Application for copies of color cards should be addressed to The Color Association of the United States, 343 Lexington Ave., New Yo
12、rk, NY 10016). * 2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence. Nothing in this specification, however, shall supersede applicable laws and regulations unless a specific
13、 exemption has been obtained. 3. REQUIREMENTS 3.1 Guide sample. Samples, when furnished, are solely for guidance and information to the contractor (see 6.3). Variations from this specification may appear in the sample in which case this specification shall govern. 3.2 First article. When specified,
14、the contractor shall furnish sample unit(s) for first article inspection andapproval (see 4.3 and 6.2). 3.3 Material. 3.3.1 Basic material * 3.3.1.1 Class 10. The material for class 10 trousers shall be polyester serge, AF Blue Shade No. 1598 conforming to MIL-C-83448. * 3.3.1.2 Classes 5, 12, and 1
15、4. The material for classes 5 and 12 trousers shall be polyester/wool tropical, 10 ounce, conforming to type III, class 3 of MIL-C-21115. The material for class 14 trousers shall be polyester/wool tropical, 10,25 ounce, conforming to type III, class 4 of MIL-C-21115. The colors shall be AF Blue Shad
16、e No. 1578 for class 5 trousers, Navy Blue Shade No. 3346 for class 12 trousers, and AF Blue Shade No. 1608 for class 14 trousers. The piece number for class 12 trousers is Standard Sample 4-001369. * 3.3.1.3 Class 15. The material for class 15 trousers shall be washable polyester/wool tropical conf
17、orming to MIL-C-24910, Blue Shade 3346, piece number 85084. * 3.3.2 Lining and interlining. The material for left fly interlining (when applicable), right fly lining, waistband lining, crotch piece, side pocket stays, and pocketing shall be twill cloth conforming to class 1 of MIL-C-43718. 3.3.2.1 C
18、olor. The color shall be Black Shade No. 423 or blue to match the basic material for classes 5, 10, and 14 trousers; and Black Shade No. 423 for classes 12 and 15 trousers. * 3,3.3 Waistband assembly. The waistband assembly for classes 5, 10, and 14 shall be a commercial band using the material stat
19、ed in 3.3.2, 3.3.4, 3.3.5, and 3.3.6. The waistband assembly for class 12 shall use the material stated in 3.3.2, 3.3.4, and 3.3.5. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-4L2H 84 9999906 0391499 3 MIL-T-41828H 3.3.4 Buckram. The mate
20、rial for interlining waistband shall be bleached or unbleached cotton buckram conforming to type II, class 1 of CCC-C-438 except the chlorine degradation requirement is not required. As an alternate, the material for interlining the waistband may be non-woven material conforming to type IV, class 1
21、of CCC-C-438. 3.3.5 Waistband stabilizer. The material for the waistband stabilizer shall be interlining cloth conforming to type I of MIL-C-43920. * 3.3.6 Tape, waistband, non-slip. The woven non-slip tape for the waistband lining assembly for the class 5, 10, and 14 trousers shall be constructed o
22、f either polyester or polyester/nylon, natural or white in color, with two rows of chloroprene or nitrile rubber threads woven or stitched to the tape. The width of the completed tape shall be 7/8 inch and shall not shrink more than -. 2% in the length direction . when subjected to the manufacturers
23、 standard procedures for determining dimensional stability to laundering and dry-cleaning as appropriate for the end item. J * 3.3.7 Labels. * 3.3.7.1 Combination label. The combination label for all classes except class 15 shall conform to Type VI classes 10 and 15 of DDD-L-20. The label shall show
24、 fastness to dry cleaning and the inscription shall read as follows: NAME : SERVICE NO: TROUSERS, MENS, POLYESTER/WOOL (Example) FIBER CONTENT: 55% Polyester/45% Wool (Example) - i/ CONTRACT NO: DLA-100-00-0-0000 (Example) NAME OF CONTRACTOR: INSTRUCTIONS Treated for permanent creasing. Press on sam
25、e crease line. Undesired crease lines may be removed by steam. - 2/ DRY CLEAN ONLY i/ The fiber content shall be the same as the basic material. - 2/ - Except for class 10, which is not treated. For class 15 trousers, the combination label shall be in accordance with Type VI, class 10 and 15 of DDD-
26、L-20. The label shall show colorfastness to laundering. The inscription and format shall be as follow: 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-41828H NAME : SERVICE NO: TROUSERS, MENS, WASHABLE, CLASS 15 (EXAMPLE) FIBER CONTENT: 75% P
27、OLYESTER AND 25% WOOL CONTRACT NO: DLA-100-00-0-0000 (EXAMPLE) LAUNDERING MACHINE WASH,oPERMANENT PRESS CYCLE WARM WATER (120 MAXIMUM) DO NOT BLEACH TUMBLE DRY - MEDIUM HEAT, REMOVE PROMPTLY MAY ALSO BE DRY CLEANED OR FOLLOW NAVEDTRA MANUAL 414-01-45-81 FORMULA III NOTE: Abreviation for applicable l
28、engths shall be as follows: Short - S; Regular - R; Long - L; Extra-Long - XL 3.3.7.2 Size label. The size label for all classes shall conform to type VI, class 2 of DDD-L-20. 3.3.7.3 Removable size ticket. Each class 12 and 15 trouser shall have a commercial type size ticket attached to the outside
29、 of the waistband above the left back pocket. The ticket shall be approximately 3 inches long and 1 inch high, made of a suitable plain white cardboard. The corners of the ticket may be double perforated for ease in tacking. The size (38R - Example) shall be printed or stamped on the upper left hand
30、 corner in black or blue ink. The lettering for the size shall be 1/4 inch in height. 3.3.8 Thread. 3.3.8.1 Thread, polyester core. The polyester core thread used for seaming and stitching the trousers shall conform to MIL-T-43548 in the following sizes: Us e Seaming and stitching Bartacks , buttonh
31、oles But ton sewing Over edging - Ticket No. Pl Y 50, 70 50 50 70 The polyester core, polyester-covered thread is not allowed. 2 or 3 2 or 3 2 or 3 2 or 3 x 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-4182H 84 7779706 0371501 MIL-T-41828H
32、 * 3.3.8.1.1 Thread, cotton. As an alternate to the polyester core thread, a cotton thread conforming to V-T-276, type I, may be used. The color shall be the same as specified in 3.3.8.4 in the f.ollowing types and sizes. Operat ion 5Pe Ticket No. - Pl Y Seaming and stitching IA3 30, 50 3 Bartacks ,
33、 buttonhole IC 2 O 3 Overedging IA3 70 2 Button sewing IB2 50 2 or 3 x 3.3.8.2 Automatic button sewing. If an automatic machine which sews and shanks (wraps) the buttons in one operation is used, the thread shall be waxed I nylon monocord special No. 5, having a minimum breaking strength of 16 pound
34、s and a minimum length per pound of 2150 yards, and shall be tested for these requirements and for colorfastness (3.3.8.5) in accordance with test methods in V-T-295. The color shall be as stated in 3.3.8.4. * 3.3.8.3 Automatic pocket machine. When automatic pocket machine using a 101 stitch type is
35、 used, thread shall be type IC2, ticket No. A, 3 ply conforming to V-T-276. When an automatic pocket machine using a 301 stitch type is used, the thread shall be ticket No. 50, 2 or 3 ply conforming to MIL-T-43548. The color shall be as stated in 3.3.8.4. * 3.3.8.4 Color. The color of the thread for
36、 classes 5, 10, and 14 trousers shall be Blue AT, C.A. 66060; and ?or classes 12 and 15 trousers, Black AA, C.A. 66043 in accordance with the standard shades for threads. O * 3.3.8.5 Colorfastness. The colored thread shall show fastness to light and wet dry-cleaning equal to or better than the stand
37、ard sample when tested as specified in MIL-T-43548. When no standard sample is available, the colored thread shall show a minimum of “good“ fastness to light and wet dry-cleaning when tested as specified in MIL-T-43548 or V-T-276. 3.3.9 Gimp. The gimp for reinforcing buttonholes shall be cotton, No.
38、 8, conforming to type I or II of V-T-280. 3.3.9.1 Color. The color of gimp for each class shall be the same as indicated for thread in 3.3.8.4 in accordance with standard shades for threads. * 3.3.9.2 Colorfastness. The colored gimp shall show fastness to wet dry-cleaning equal to or better than th
39、e standard sample. When no standard sample is available, the colored gimp shall show a minimum of “good“ colorfastness to wet dry-cleaning when tested as specified in V-T-280. 7 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-T-LlLZH Ll 9 7979
40、70b 0371502 T 9 MIL-T-41828H * 3.3.10 Buttons. The button for the left hip pocket shall be type II, class D, style 4, 22-line, glossy finish, conforming to V-B-871 The color of the buttons shall be Black, Shade BT, Cable No. 62001 for classes 12 and 15 trousers and Blue Shade BV Cable No. 62003 for
41、classes 5, 10, and 14 trousers in accordance with standard shades for buttons. * 3.3.11 Slide fastener. For classes 5, 10, and 14 trousers, the slide fastener shall be type I, style 1, cam lock, size LS, short tab pull, brass or zinc chain, conforming to V-F-106, except that the salt spray test shal
42、l not apply. For classes 12 and 15 trousers, the slide fastener shall be the same except the salt spray test applies, size shall be LMS, all metal components shall be of brass and from the same supplier (see 4.4.1). A staple bottom stop is required. The tape shall show fastness to wet dry-cleaning e
43、qual to or better than the standard sample. When no standard sample is available, the tape shall show “good“ co1,orfastness to wet dry-cleaning when tested as specified in V-F-106. The tape shall match Blue Shade 1578, 1598, or 1608 for classes 5, 10, and 14 trousers; and Black Shade G, Cable No. 66
44、507 for classes 12 and 15 trousers. * 3.3.12 Hook and eye. The hook and eye for the trouser waistband shall be nickle plated finish, North and Judd (Hook Flex H49 and E50); Universal Fastener Inc., (# Akim Co (Junior Series, type JB, Slim-Slak or Slik-Slak with MB eye); Stimpson Co, Inc., (P536 and
45、D4086 or D4457 and D4228) or functionally interchangeable equivalent (see 4.4.1). * 3.4 Design. The trousers are dress type with a sewn-on waistband with hook and eye closure, a French fly with slide fastener, straight side pockets and double cord hip pockets. The left hip pocket shall have a button
46、hole tab and button. An outlet is provided at seat seam and from crotch to knee at inseam. The trousers shall have a sharp permanent leg crease except class 10, which shall not have treatment. * 3.4.1 Figures. Figures are furnished for information purposes only. To the extent of any inconsistencies
47、between the written specification and the figures, the specification shall control, 3.5 Patterns. Standard patterns to be used to cut working patterns will be furnished by the Government. Except as allowed by footnote to table I, the working patterns shall be identical to the Government patterns whi
48、ch shall not be altered in any way. The patterns provide a 1/4 inch seam allowance for bagging pockets and a 3/8 inch seam allowance for all other seams except seat seam and inseam of back part; 7/8 inch has been added to the seat seam allowances (total 1-1/4 inches at top) to allow for tapering the
49、 seat outlet and 3/4 inch has been added to the inseam of back part (total 1-1/8 inches at top) to allow for tapering the inseam outlet of back part. 3.5.1 Pattern parts. The component parts of the trousers shall be cut from materials as specified in accordance with the number of parts required as shown in table I. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-4
