1、8G - a4.y *A. YAVY -AS hhcr Cud USAF - 99 ARMY - AV DROCUREMENT SPECIFICATION NOONE W PROJECT HO. 2935-0015 1 FED. SUP CLASS TITLE MILITARY ST AN DARD AAS23005 TUBE - OIL COOLER 1 OF 1 SUPERSEDES. SHEET HARDNESS NO. IN THIS AREA 70 MIN ROCKWELL 15T SCALE rT I I l I 2935 -i .625 5.125 I II I I i 2300
2、5-01 9.500 .O09 23005-02 9.531 .O09 23005-03 9.593 ,009 23005-04 11.562 .O09 1 23005-05 I l:L: 1 Ai! 1 AlCl 23005-06 23005-19 9.593 .O06 .O07 23005-07 10.125 .O11 23005-20 10.125 .O06 ,007 23005-08 10.406 .O10 ,012 23005-21 11.156 .O06 .O07 I 1 23005-18 1 9.531 I .O06 1.007 1 23005-09 113.562 I .O10
3、 I .O12 23005-10 I 5.906 I .O10 I .O12 -1 23005-13 8.093 .O09 .O11 (a) NOTES : FLAME ANNEAL BOTH ENDS AFTER HEAT TREATbENT TO DIMENSIONS SHOWN PRIOR TO FLARING ONE END: HARDNESS 60-75 ROCKWELL 15T SCALE. MATERIAL: ALMINUM ALLOY 6061-T6 (!Jas A96061) OR 695I-T6 (UXS A96951). 2. HEAT TREAT: MIL-H-6088
4、 3. 4. FINISH: CHEMICAL FILM: MIL-C-5541, BEFORE FLME ANNEAL, 5. STRAIGHTNESS: TBE AXIS SHALL NOT DEVIATE MORE THAN .O05 IN 10 INCH LENGTH. 6. DIMENSIONS IN INCHES. 7. TESTS: TESTS SHALL BE CONDUCTED IN ACCORDANCE WITH MIL-STD-105. IXSPECTION LEVEL 1, SURFACEPXTURE WALL OVER IN ACCORDANCE WITH ANSI
5、B46.1, AQL 0.65 FOR EACH TEST. DOUBLE OR MULTIPLE SAMPLING MAY BE USED. INTERNAL PRESSURE! EXTERNAL PRESSURE: THE TUBE SHALL WITHSTAND 200 PSI APPLIED EXTERNALLY WITHOUT HARDNESS TEST: FLARING AND FLARING TEST: FLARE AS NOTED ON STANDARD AND DYE PENETRANT INSPECT DBERSED IN WATER, THE TUBE SHALL BE
6、SUBJECTED TO 100 PSI AIR PRESSURE FOR AT LEAST 2-1/2 SECONDS. COLLAPSING. MF,THOD 243.1. FLARED END FOR CRACKS. THERE SHALL BE NO VISIBLE LEAKAGE. TEST IN ACCORDAKCE WITH FEDERAL TEST MF,THOD STANDARD NO. 151, FOR DESIGN FEATURE PURPOSES THIS STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN. REFERENCED DOCmENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID. - DENOTES CHANGE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
