1、PnJ. No. 1 FED. SUP CLAU .O63 125 ANY - SECTION CONTAINING LONGITUDINAL AXIS EXTERNAL SHEm !l,oyzT-60R 3/8-24 UNF-3A MIL-1-631 TUBING 36 2 1 LONG FROM NOTE 8 END OF THREAD ELECTREAL AC NOTES: 1. MMENSIONS IN ETCHES. TOLERANCES UNLESS OTHERWISE SPECIFIED: DECIMAIS?. 005, ANGLES 2 10. THE INDEXER NEED
2、 NOT HAVE THE SHAPE SHOWN, BUT-THE INDEXER, INCLUDING ANY LIGHT-SHIELDING HOOD SHALL BE CONTAINED WITHIN TRE OUTLINE SHOWN, AND THE RADIUS OF THE CORNERS OF THE INDEXER AS VEWED FROM THE SIDE SHALL BE AT LEAST O. 060 INCH, EXCEPT FOR ANY LIGHT-SHIELDING HOOD INSTALLET ON THE INDEXER. THE INDEXER SHA
3、LL BE DESIGNED SO THAT IT CANNOT BE OPENED OR DISASSEMBLED IN AN WAY, NOR ANY LAMP REMOVED OR REPLACED, WITHOUT THE USE OF TOOI6s. EACH INDEXER SHALL BE MOUNTABLE ON A PANEL OF ANY THICKNESS BETWEEN O. 020 AND O. 750 INCH INCLUSIVE. EACH ILLUMiNATED MARKNG (UPPER T, LOWER T, OR CIRCLE) SHALL BE INTE
4、RNALLY SHiELDED SO TKA1 THE LAMP FOR THAT MARICING WILL NOT ILLUMINATE ANY OTHER MARKING. EXTERNAL SHiELDING SO THAT NONE OF THE ILLULENATED MARKING IS VISIBLE (2) MS PART NO. ; (3) MANUFAC- TURERS PART NO. ; (4) MANUFACTURERS NAME AND ADDRESS; (5) WIRING SCHEMATIC. 11. PART NUMBERS OF INDEXERS WHIC
5、H INCLUDE LAMPS SHALL BE MARKED ON THEIR SHIPPING CONTAINERS ONLY, AND SHALL CONSIST OF THE PART NUMBER OF THE INDEXER FOLLQWED BY THE DASH NUMBER OF THE LAMP. EXAMPLE: h2525317-7-328. 12. PART NUMBERS MS25317-1, -2, -3, AND -6 CANCELLE-D. MS25311-7 FOR NAVY AND MS25317-8 FOR AIR FORCE. FOR THE NEW
6、DESIGN AND REPLACEMENTS USE ORDESIGNFEATRE PURPOSES, THISSTANDARDTAKESPRECEDENCEOVERPROCUREaNTDOCUhlENTSREFERENCEDHEREIN. LEFERENCE DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BU). MILITARY STANDARD A NAVY *AS TITLE ithn Curt WAF - 82 INDEXER, APPROACH . MS25317 %CICUREMENT SPECiFICATiON WPERSEDESi MC25317 (AS A SHEET 1 OF 1 MIL-L-6723 .- I - (FI Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
