1、OO-S- 8 70E 6 *Januarv.1984 * * SUPERSEDING 00-S-870D October 20, 1970 FEDERAL SPECIFICATION SWEEPERS, ROTARY , SELF-PROPELLED INDUSTRIAL TYPE, RIDER-OPERATED This specification was approved by the Assistant Administrator, Office of Federal Supply and Services , General Services Administration, for
2、the use of all Federal agencies. 1. SCOPE AND CLASSIFICATION 1.1 Scope. This specification covers gasoline, diesel, liquified petroleum-gas (LPG) engine powered, and battery powered, commercial, self-propelled , rider operated , indus trial type sweepers equipped with a vacuum dust control system an
3、d hopper to collect and transport sweepings. 1.1.1 Federal specification.coverage. Federal specifications do not include all varieties of the commodity as indicated by the title of the specification, or are commerically available, but are intended to cover only those generally used by the Federal Go
4、vernment. 1.2 Classification. Sweepers shall be one of the following types and sizes, as specified (see 6.2): Type I - Gasoline- or diesel-engine-driven Type II - Electric-motor-driven, battery powered (sizes 36 and 42 only) Type III - LPG engine driven Size 28 - Main brush length not less than 28 i
5、nches Size 36 - Main brush length not less than 36 inches Size 42 - Main brush length not less than 42 inches Size 48 - Main brush length not less than 48 inches 2. APPLICABLE DOCUMENTS 2.1 The following documents, of the issues in effect on date of invitation for bids or request for proposal, form
6、a part of this specification to the extent specified herein: Federal -Specifications W-B-131 - Battery, Storage, Vehicular, Ignition, Lighting, and W-B-133 - Batteries , Storage (Lead Acid, Industria Portable Starting Service 1 FSC 3825 THIS DOCUMENT CONTAINS v PAGES. , Provided by IHSNot for Resale
7、No reproduction or networking permitted without license from IHS-,-,-00-S-870E 38 9999974 0015062 3 W 00-S-870E W-G-1690 - Gasoline, Automotive, Leaded.or Unleaded ZZ-T-391 - Tire, Solid Rubber, and Wheels, Solid Rubber Tire, (Indus tr ia1 ) ZZ-T-410 - Tire Pneumatic Industrial (Activities outside t
8、he Federal Government may obtain copies of Federal specifications, standards, and commercial item descriptions as outlined under General Information in the Index. of Federal Specifications, Standards, and Commercial Item Descriptions. The Index, which includes cumulative bimonthly supplements as iss
9、ued, is for sale on a subscription basis by the Superin- tendent of Documents, U.S. Government Printing Office, Washington, DC 20402.) (Single copies of this specification and other Federal specifications and commercial item descriptions required by activities outside the Federal Government for bidd
10、ing purposes are available without charge from General Services Administration Business Service Centers in Boston, MA; New York, NY; Philadelphia, PA; Washington, DC; Atlanta, GA; Chicago, IL; Kansas City, MO; Fort Worth, TX; Houston, TX; Denver, CO; San Francisco, CA; Los Angeles, CA; and Seattle,
11、WA.) (Federal Government activities may obtain copies of Federal standardization documents, and the Index of Federal Specifications, Standards, and Commercial Item Descriptions from established distribution points in their agencies ) Military *Specifications MIL-V- 173 - Varnish , Mois ture, and Fun
12、gus Res is tant (For Treatment of Communications , Electronic , and Associated Equipment) MIL-T-704 - Treatment and Painting of Material Mi 1 it arv S tan dards MIL-STD-209 - Slinging and Tiedown Provisions fo Lifting and Tyi MIL-STD-461 - Electromognetic Emission and Susceptibility Down Military Eq
13、uipment Requirements For the Control of E lec tromagnetic Inter f er an ce (Copies of military sped fications and standards required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) Federal Reg
14、ulations DEPARTMENT OF TRANSPORTATION (DOT) Federal Motor Vehicle Safety Standards and Regulations Motor Carrier Safety Regulations (Application for copies should be addressed to the Superintendent of Documents, Government Printing Office, Washington, DC 20402 ) 2 Provided by IHSNot for ResaleNo rep
15、roduction or networking permitted without license from IHS-,-,-00- S- 8 7 OE ENVIRONMENTAL PROTECT ION AGENCY (EPA) Code of Federal Regulations, Title 45, Part 1201 - New Motor Vehicles and Engines (Application for copies should be addressed to the Public Affairs Office, Environmental Protection Age
16、ncy, Rockville, MD 20852. - (The Code of Federal Regulations (CFR) and the Federal Register (FR) are for sale on a subscription basis by the Superintendent of Documents, U. S. Government Printing Office , Washington, DC 20402. When indicated, reprints of certain regulations may be obtained from the
17、Federal agency responsible for issuance thereof. ) 2.2 0ther.publications. The following documents form a part of this specification to the extent specified herein. Unless a specific issue is identified, the issue in effect on date of invitation for bids or request for proposal shall apply. STATE OF
18、 CALIFORNIA California Vehicle Code (Application for copies should be addressed to the Department of Motor Vehicles, 2570 24th Street, Sacramento, CA 95809.) NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA) MG - 1 - Motors and Generators (Application for copies should be addr.essed to the Nation
19、al Electrical Manufacturers Association, 2101 L Street, N.W. , Washington, DC 20037.) SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE) SAE Handbook (Application for copies should be addressed to the Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) TIRE AND RIM ASSOCIA
20、TION, INC. (TRA) t TRA Yearbook (Application for copies should be addressed to the Tire and Rim Association, Inc., 3200 West Market Street, Akron, OH 44313.) 2.3 Order-of-precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this s
21、pecification shall take precedence. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-S-870E 38 779777L1 00150b4 7 W 00-S- 870E 3. REQUIREMENTS 3.1 Description. The sweeper shall be a power-driven wheeled vehicle consisting of a welded steel frame
22、, driven brushes, a hopper to collect sweepings, a vacuum dust control, automotive type steering, brakes, operating controls, and all other parts and accessories necessary for the purpose intended. 3.2 First article. When specified (see 6.21, the contractor shall furnish a complete sweeper for first
23、 article inspection and approval (see 4.2.1 and 6.2). 3.3 Repair.parts.and-service. Replacement, or repair, parts, and service for the product provided under this specification shall be available from the manufacturers regular, or through commerical parts distribution, or services organizations. 3.3
24、.1 1dentification.or.model.numbers. The product provided under this specification shall be identifiable by the manufacturers regular or by comercial parts dis tribution, or service organizations. 3.4 Materials. Materials used shall be free from defects which would adversely affect the performance or
25、 maintainability of individual components or of the overall assembly. Materials not specified herein shall be of the same quality used for the intended purpose in commercial practice. Unless otherwise specified herein, all equipment, material, and articles incorporated in the work covered by this sp
26、ecification are to be new and fabricated using materials produced from recovered materials to the maximum extent possible without jeopardizing the intended use. The term “recovered materials“ means materials which have been collected or recovered from solid waste and reprocessed to become a source o
27、f raw mterials, as opposed to virgin raw materials. None of the above shall be interpreted to mean that the use of used or rebuilt products are allowed under this specification unless otherwise specified 3.5 Interchangeability. All units of the same classification furnished with similar oDtions unde
28、r a specific contract shall be identical to the extent necessary to insure interchangeability of component parts, assemblies, accessories, and spare parts. 3.6 Construction. The equipment shall be designed and constructed to facilitate field maintenance. All adjustments and replaceable accessories s
29、hall be readily accessible. or deleterious to equipment under norrral use shall not be permitted. Conditions which can be hazardous to pe,rsonnel 3.6.1 Cleaning, treatment, and painting. Surfaces normally painted in good commercial practice shall be cleaned, treated, and painted as specified herein.
30、 When specified (see 6.21, the unit shall be cleaned, treated, and painted in accordance with MIL-T-704, type A. In either case, color of the finish coat shall be as specified (see 6.2). 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-S-870E 38
31、99977iq 0025065 7 00-S-870E 3.6.1.1 Cleaning. Metal surfaces to be painted shall be cleaned to insure that they are free from all oil and grease, welding slag and spatter, all mill scale, which can be removed by power wire brushing, products of corrosion, dirt, or other foreign substances. 3.6.1.2 T
32、reatment. As soon as practicable after cleaning and before any evidence of rust or other contamination can result, metal surfaces shall be treated with a primer pretreatment coating to increase the adhesion of the coating sy.s tem. 3.6.1.3 Painting. Painting shall consist of at least one coat of rus
33、t-inhibiting primer and one coat of finish enamel. primer shall be applied to a clean, dry surface as soon as practicable after cleaning and treating. materials according to manufacturers current process except that the total dry film thickness shall be not less than 2.5 mils. The paint shall be fre
34、e from runs, sags, orange peel, or other defects. The rust-inhibiting Painting shall be with manufacturers current 3.6.2 Identification marking. Each sweeper shall bear the manufacturers name or trademark on a nameplate securely affixed in a conspicuous place. In lieu of the nameplate, the manufactu
35、rers name or trademark may be cast integral with, stamped, or otherwise permanently marked upon the sweeper. An identification plate will be furnished by the contracting officer for each sweeper. The contractor shall stamp all necessary data in the blank spaces of the plate provided for the purpose,
36、 and securely affix a plate to each sweeper in a conspicuous place. The applicable nomemclature contained in the contract item description shall be placed in the top blank. 3.6.3 Instruction plates. The sweeper shall be equipped with instruction plates or decals suitably located, describing any spec
37、ial or important procedures to be followed in operating and servicing the sweeper or warnings of hazardous procedures. Plates shall be of a material which will last and remain legible for the life of the sweeper, and shall be securely affixed thereto. Properly affixed plastic decals are also permitt
38、ed. 3.6.4 Fungus resistance. When specified (see 6.2), electrical components and circuit elements, including terminal and circuit connections, shall be coated with varnish conforming to MIL-V-173, except that: a. Components and elements inherently inert to fungi or in b. Current-carrying contact sur
39、faces, such as relay contact points, hermetically sealed enclosures need not be coated. shall not be coated. 3.6.5 Electromagnetic.interference.contro1. When specified (see 6.21, the sweeper shall conform to the electromagnetic radiation suppression characteristics of SAF, 5552, or electromagnetic i
40、nterference control requirements of MIL-STD-461 for class IIIC equipment as specified (see 6.2). 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-OO-S- 870E 3.6.6 Lifting.and.tying,down.attachments. When specified (see 6.21, the sweeper shall be equ
41、ipped with lifting and tying down attachments. Lifting and tying down attachments shall conform to MIL-STD-209, type III, except a 3-point helicopter lift is acceptable. Attachments shall be indicated by a transportation plate, except tying down attachments may be identified by stenciling or other s
42、uitable marking on the sweeper. clearly indicate that the attachments are intended for tying down of the sweeper on the carrier when shipped. Tying down marking shall 3.7 Capacities. and, operational. characteristics. Sweepers shall conform to the requirements of table I. TABLE I. CaDacities and.oDe
43、rational.characteristics . . . Size. I 28 36 42 48 I Length of main brush, not less than (inches) 28 36 42 48 I Diameter of side brush, not less than (inches) 14 19 21 21 i/ Engine horsepower (net), not less than 7 12 18 25 I Sweeping width (swath) with one side brush, not less than (inches) 40 47 5
44、3 60 Rated hopper .capacity, not less than (cubic feet) 4.5 9 12 14 .I Maximoutside.turning.radius;.not-morethan.(inches),. 65.*.76*88 %90 I . . %LI -I I Maximum sweeping speed, not less than (miles per hour) . 5 5 5 91 - - i/ Engine horsepower (hp) (net) shall be equal to the dynamometer rating of
45、the engine, complete with cooling fan, muffler, generator or alternator, and air filter at not higher than 3,6000 revolutions per minute when corrected to 29 inches of mercury barometric pressure and 60 degrees Fahrenheit (OF) ambient temperature. 3.8 Performance. Sweepers shall be capable of operat
46、ing in ambient temperature ranging from +125“F to -10F. Sweepers shall effectively sweep and retain dust, dirt, and debris while operated at the sweeping speed recommended by the contractor, along hard surfaced areas, gutters, and ramps. Types I and III sweepers shall be capable of ascending and swe
47、eping a 20 percent grade, and type II sweeper shall be capable of ascending and sweeping a 12 percent grade. When tested as specified in 4.4.2, the sweeper shall, in a one-way pass, pick up and retain not less than 95 percent of the sand while traveling at the manufacturers recommended sweeping spee
48、d, but not less than 2-1/2 miles per hour (mph), except for the size 28 sweeper which shall be tested at not less than 1-1/2 mph. No visible dust shall escape from the vacuum system. When tested as specified in 4.4.3, the sweeper shall, in a one-way pass, pick up and retain not less than 90 percent
49、of the specified items while traveling at not: less than 5 mph. There shall be not be more than two items of the same kind in any group of items not picked up. The sweeper shall show no evidence of deformation, fracture, or failure of any part or 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-S-870E 38 W 7777774 00L50b7 2 M 00-S-870E component. The sweeper shall be capable of passin
