1、QPL-239532012-01-26QUALIFIED PRODUCT LISTOFPRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATIONMIL-V-23953VALVES, COMBINED VENT-CHECK, FOR SUBMARINE MBT BLOW LINES (SIZES 1-1/2 TO 2-1/2 INCHES)This list has been prepared for use by or for the Government in the acquisition of products covered by the su
2、bject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specif
3、ication. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.The activity responsible for this QPL is Naval Sea Systems Command, 133
4、3 Isaac Hull Ave. SE, Washington Navy Yard, DC 20376-5160 or email commandstandardsnavy.mil.GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipSIZE 2“ (SEE NOTES)SIZE 2-1/2“ (SEE NOTES)SIZE 1-1/2“ (SEE NOTES)QPL-239531 of 2Source: QPD at htt
5、ps:/assist.daps.dla.mil - QPL Date: 2012-01-26If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Manufacturer/Supplier Information2 of 2Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2012-01-26If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
