NAVY QPL-AMS-A-25463-2012 ADHESIVE FILM FORM METALLIC STRUCTURAL SANDWICH CONSTRUCTION.pdf

上传人:lawfemale396 文档编号:984565 上传时间:2019-03-12 格式:PDF 页数:4 大小:18.65KB
下载 相关 举报
NAVY QPL-AMS-A-25463-2012 ADHESIVE FILM FORM METALLIC STRUCTURAL SANDWICH CONSTRUCTION.pdf_第1页
第1页 / 共4页
NAVY QPL-AMS-A-25463-2012 ADHESIVE FILM FORM METALLIC STRUCTURAL SANDWICH CONSTRUCTION.pdf_第2页
第2页 / 共4页
NAVY QPL-AMS-A-25463-2012 ADHESIVE FILM FORM METALLIC STRUCTURAL SANDWICH CONSTRUCTION.pdf_第3页
第3页 / 共4页
NAVY QPL-AMS-A-25463-2012 ADHESIVE FILM FORM METALLIC STRUCTURAL SANDWICH CONSTRUCTION.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、QPL-AMS-A-254632012-04-09QUALIFIED PRODUCT LISTOFPRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATIONSAE-AMS-A-25463ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTIONThis QPL has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Govern

2、ment standard and inclusion of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products included herein have been qualified under the requirements for the products as specified in the latest effective issue of the applicable non-Governme

3、nt standard. This QPL is updated as necessary and is subject to change without notice. Inclusion of a product does not release or otherwise affect the obligation of the manufacturer to comply with the non-Government standard requirements.THE ACTIVITY RESPONSIBLE FOR THIS QUALIFIED PRODUCTS LIST IS T

4、HE NAVAL AIR SYSTEMS COMMAND (ATTENTION: COMMANDER, NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION, CODE 4L8000B120-3, HIGHWAY 547, LAKEHURST, NJ 08733-5100). THE ACTIVITY RESPONSIBLE FOR QUALIFICATION APPROVAL IS THE NAVAL AIR SYSTEMS COMMAND, (CODE 4.3.4.2), 48066 SHAW ROAD, BLDG. 2188, PATUXENT RIVER

5、, MD 20670-1908.GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipM25463 TYPE I, CLASS 1, CURE GROUP 3 METLBOND 1113 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: METLBOND 6726 PRIMER FILM COMPONENT: METLBOND1113 SUPPORTED (0.060PSF)Report No

6、. 302-773001 of 15 Mar 19730DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 1, CURE GROUP 3 METLBOND 1113 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: METLBOND 6726 PRIMER FILM COMPONENT: METLBOND1113 SUPPORTED (0.060PSF)04622 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 METLBOND

7、1113 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: METLBOND 6726 PRIMER FILM COMPONENT: METLBOND 1113 SUPPORTED (0.060 PSF)Report No. 302-773001 of 15 Mar 19730DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 METLBOND 1113 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: METLBOND 6726 PRI

8、MER FILM COMPONENT: METLBOND 1113 SUPPORTED (0.060 PSF)04622 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-123 PRIMER FILM COMPONENT: FM-123-2 (0.075 PSF)AML report No. 78452-66 of25 Mar 1966, NAEC ltr M-52 EKR: ems (8523) of 21

9、 Oct 19660DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-123 PRIMER FILM COMPONENT: FM-123-2 (0.075 PSF)1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 FILM ADHESIVE (0.065 PSF) (FILM ONE-PART).A

10、MD Report No. WA768832 of 9 May 19680DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 FILM ADHESIVE (0.065 PSF) (FILM ONE-PART).1KU10 P Green Until: 09-APR-14NQPL-AMS-A-254631 of 4Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2012-04-09If past the certification dat

11、e, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 (LIQ

12、UID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-2 (0.060 PSF)AMD Report No. MA769390 of 2 Jun 19690DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-2 (0.060 PSF)1K

13、U10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-2 (0.85 PSF)AMD Report No. MA769390 of 2 Jun 19690DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-2 (LIQUID & FILM, TW

14、O-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-2 (0.85 PSF)1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-5 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-5 (0.040 PSF)AMD Report No. MA769390 of 2 Jun 19690DD72 M Green Unt

15、il: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-5 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-5 (0.040 PSF)1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-5 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPON

16、ENT: FM-123-5 (0.85 PSF)AMD Report No. MA769390 of 2 Jun 19690DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-123-5 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-123-5 (0.85 PSF)1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 F

17、M-137 ADHESIVE (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONENT: FM-137 (0.065 PSF)AMD Report No. MA-771007 of 26 Oct 19700DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 3 FM-137 ADHESIVE (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-127 PRIMER FILM COMPONE

18、NT: FM-137 (0.065 PSF)1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 4 FM-61 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-227A PRIMER FILM COMPONENT: FM-61 (0.075 PSF)Report No. NAMC-AML-1384 of 5 Feb 19620DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 4 FM-61

19、(LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-227A PRIMER FILM COMPONENT: FM-61 (0.075 PSF)1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 4 FM-96 ADHESIVE FILM (0.075 PSF) (FILM, ONE PART).Report No. NAMC-AML-1543 of 18 Oct 19620DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS

20、2, CURE GROUP 4 FM-96 ADHESIVE FILM (0.075 PSF) (FILM, ONE PART).1KU10 P Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 4 FM-96 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-227 PRIMER FILM COMPONENT: FM-96 (0.075 PSF)Report No. NAEC-AML-1623 of 13 Feb 19630DD72 M Green Until: 09-APR-14N

21、M25463 TYPE I, CLASS 2, CURE GROUP 4 FM-96 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-227 PRIMER FILM COMPONENT: FM-96 (0.075 PSF)1KU10 P Green Until: 09-APR-14NQPL-AMS-A-254632 of 4Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2012-04-09If past the certification date, contact Qualifying

22、 Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipM25463 TYPE I, CLASS 2, CURE GROUP 4 FM-47 (LIQUID & FILM, TWO-PART. LI

23、QUID COMPONENT: BR-47 LIQUID ADHESIVE FILM COMPONENT: FM-47, TYPE II (0.08 PSF)Report No. NAEC-AML-1979 of 25 Jun 19640DD72 M Green Until: 09-APR-14NM25463 TYPE I, CLASS 2, CURE GROUP 4 FM-47 (LIQUID & FILM, TWO-PART. LIQUID COMPONENT: BR-47 LIQUID ADHESIVE FILM COMPONENT: FM-47, TYPE II (0.08 PSF)1

24、KU10 P Green Until: 09-APR-14NM25463 TYPE II, CLASS 1, CURE GROUP 4M-328, TYPE I (0.095 PSF) (FILM, ONE-PART).AML Report No. 78436-66 of 1 Mar 1966, NADC ltr MAPP 90958 of 30 Oct 19670DD72 M Green Until: 09-APR-14NM25463 TYPE II, CLASS 1, CURE GROUP 4M-328, TYPE I (0.095 PSF) (FILM, ONE-PART).04622

25、P Green Until: 09-APR-14NM25463 TYPE II, CLASS 1, CURE GROUP 4M-329, TYPE I (0.095 PSF) (FILM, ONE-PART).AML Report No. 78422-66 of 15 Apr 19660DD72 M Green Until: 09-APR-14NM25463 TYPE II, CLASS 1, CURE GROUP 4M-329, TYPE I (0.095 PSF) (FILM, ONE-PART).04622 P Green Until: 09-APR-14NM25463 TYPE II,

26、 CLASS 2, CURE GROUP 4M-329, TYPE I (0.095 PSF) (FILM, ONE-PART).AML Report No. 78422-66 of 15 Apr 19660DD72 M Green Until: 09-APR-14NM25463 TYPE II, CLASS 2, CURE GROUP 4M-329, TYPE I (0.095 PSF) (FILM, ONE-PART).04622 P Green Until: 09-APR-14NM25463 TYPE II, CLASS 2, CURE GROUP 4M-328, TYPE I (0.0

27、95 PSF) (FILM, ONE-PART).AML Report No. 78436-66 of 1 Mar 1966, NADC ltr MAPP 90958 of 30 Oct 1967.0DD72 M Green Until: 09-APR-14NM25463 TYPE II, CLASS 2, CURE GROUP 4M-328, TYPE I (0.095 PSF) (FILM, ONE-PART).04622 P Green Until: 09-APR-14NM25463 TYPE II, CLASS 2, CURE GROUP 4HT-424 (.15 PSF) (FILM

28、, ONE-PART)WWRCN 60-28 of 30 May 19600DD72 M Green Until: 09-APR-14NM25463 TYPE II, CLASS 2, CURE GROUP 4HT-424 (.15 PSF) (FILM, ONE-PART)1KU10 P Green Until: 09-APR-14NM25463 TYPE III, CLASS 2, CURE GROUP 4HT-424 (.15 PSF) (FILM, ONE-PART)WWRCN 60-28 of 30 May 19600DD72 M Green Until: 09-APR-14NM25

29、463 TYPE III, CLASS 2, CURE GROUP 4HT-424 (.15 PSF) (FILM, ONE-PART)1KU10 P Green Until: 09-APR-14NQPL-AMS-A-254633 of 4Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2012-04-09If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction

30、or networking permitted without license from IHS-,-,-Manufacturer/Supplier InformationCAGE CODE: 04622CYTEC ENGINEERED MATERIALS INC 1440 N KRAEMER BLVD ANAHEIM CA 92806-1404 USAhttp:/WWW.CYTEC.COM CAGE CODE: 0DD72CYTEC ENGINEERED MATERIALS INC. 2085 E TECHNOLOGY CIR STE 300 TEMPE AZ 85284-1813 USAh

31、ttp:/WWW.CYTEC.COM CAGE CODE: 1KU10CYTEC ENGINEERED MATERIALS INC. 1300 REVOLUTION ST HAVRE DE GRACE MD 21078-3800 USA4 of 4Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2012-04-09If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSS-M9P9-C-2014 DYNAMIC SEALING PERFORMANCE SPECIFICATION  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSS-M9P9-C-2014 DYNAMIC SEALING PERFORMANCE SPECIFICATION TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSS-M9P9-C-2016 DYNAMIC SEALING PERFORMANCE SPECIFICATION  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSS-M9P9-C-2016 DYNAMIC SEALING PERFORMANCE SPECIFICATION TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSS-M9P9-D-2016 DYNAMIC SEALING PERFORMANCE SPECIFICATION  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSS-M9P9-D-2016 DYNAMIC SEALING PERFORMANCE SPECIFICATION TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WST-M1C231-B2-2008 LUBRICANT POLYALKYLENE GLYCOL  TO BE USED WITH FORD WSS-M99P1111-A  《聚二醇润滑剂  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSH-M1C231-B上[使用 FORD WSS-M13P13-A FORD WS.pdf FORD WST-M1C231-B2-2008 LUBRICANT POLYALKYLENE GLYCOL TO BE USED WITH FORD WSS-M99P1111-A 《聚二醇润滑剂 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSH-M1C231-B上[使用 FORD WSS-M13P13-A FORD WS.pdf
  • FORD WSZ-M2G383-A3-2004 TAPE ADHESIVE EPOXY BASED STRUCTURAL HIGH-EXPANDING HIGH TEMPERATURE CURING  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSB-M2G383-A1)《高温固化高膨胀性结构用环氧树脂基粘.pdf FORD WSZ-M2G383-A3-2004 TAPE ADHESIVE EPOXY BASED STRUCTURAL HIGH-EXPANDING HIGH TEMPERATURE CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M2G383-A1)《高温固化高膨胀性结构用环氧树脂基粘.pdf
  • FORD WSZ-M4D778-A-2008 ABS HIGH IMPACT MOLDING COMPOUND PAINTABLE -  TO BE USED WITH FORD WSS-M99P1111-A  《可油漆高冲击模制物料ABS(与FORD WSS-M99P1111-A一起使用) (使用 FORD WSS-M4D827-A3)》.pdf FORD WSZ-M4D778-A-2008 ABS HIGH IMPACT MOLDING COMPOUND PAINTABLE - TO BE USED WITH FORD WSS-M99P1111-A 《可油漆高冲击模制物料ABS(与FORD WSS-M99P1111-A一起使用) (使用 FORD WSS-M4D827-A3)》.pdf
  • FORD WSZ-M4D781-A-2008 ABS SELF EXTINGUISHING MOLDING COMPOUND INTERIOR -  TO BE USED WITH FORD WSS-M99P1111-A  《丙烯腈-丁二烯-苯乙烯 内部使用自熄模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-.pdf FORD WSZ-M4D781-A-2008 ABS SELF EXTINGUISHING MOLDING COMPOUND INTERIOR - TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯 内部使用自熄模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-.pdf
  • FORD WSZ-M4D783-A-2010 POLYPROPYLENE (PP) COPOLYMER 20 % MINERAL FILLED MELT FLOW RATE 0 8 - 2 0  TO BE USED WITH FORD WSS-M99P1111-A  《熔体流动速率为0 8-2 0的20%矿物填充的的聚丙烯(PP)均聚物  与标准FORD .pdf FORD WSZ-M4D783-A-2010 POLYPROPYLENE (PP) COPOLYMER 20 % MINERAL FILLED MELT FLOW RATE 0 8 - 2 0 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为0 8-2 0的20%矿物填充的的聚丙烯(PP)均聚物 与标准FORD .pdf
  • FORD WSZ-M4D787-A-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 33% SHORT GLASS FIBER REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  (Use WSK-M4D673-A)《受热稳定、33%短玻璃纤维增强的聚.pdf FORD WSZ-M4D787-A-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 33% SHORT GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《受热稳定、33%短玻璃纤维增强的聚.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1