1、*USACE / NAVFAC / AFCESA / NASA UFGS-32 05 33 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-32 05 33 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 32 - EXTERIOR IMPROVEMENTSSECTION 32 05 33LANDS
2、CAPE ESTABLISHMENT02/10PART 1 GENERAL1.1 REFERENCES1.2 DEFINITIONS1.2.1 Pesticide1.2.2 Stand of Turf1.2.3 Planter Beds1.3 RELATED REQUIREMENTS1.4 SUBMITTALS1.5 DELIVERY, STORAGE AND HANDLING1.5.1 Delivery1.5.2 Storage1.5.2.1 Fertilizer, Lime, Iron, Mulch Storage1.5.2.2 Antidessicants Storage1.5.3 Ha
3、ndling1.6 SUSTAINABLE DESIGN REQUIREMENTS1.6.1 Local/Regional Materials1.7 MAINTENANCEPART 2 PRODUCTS2.1 POST-PLANT FERTILIZER2.1.1 Granular Fertilizer2.2 WATER2.2.1 Hose2.3 MULCHES TOPDRESSING2.3.1 Inert Mulch Materials2.3.2 Organic Mulch Materials2.3.3 Recycled Organic Mulch2.4 PESTICIDESPART 3 EX
4、ECUTION3.1 EXTENT OF WORK3.1.1 Policing3.1.2 Drainage System MaintenanceSECTION 32 05 33 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.2 IRRIGATION ESTABLISHMENT PERIOD3.2.1 Maintenance During the Irrigation Establishment Period3.2.2 Water
5、Restrictions3.2.3 Fire Hydrants3.2.4 Final Acceptance3.2.5 Controller Charts3.3 GROUNDCOVER ESTABLISHMENT PERIOD3.3.1 Frequency of Maintenance3.3.2 Promotion of Growth3.3.3 Mowing3.3.3.1 Turf3.3.3.2 Native Grasses3.3.3.3 Wildflowers3.3.4 Turf Edging and Trimming3.3.5 Post-Fertilizer Application3.3.6
6、 Turf Watering3.3.7 Turf Aeration3.3.8 Turf Clearance Area3.3.9 Replanting3.3.10 Final Inspection and Acceptance3.3.11 Unsatisfactory Work3.4 EXTERIOR PLANT ESTABLISHMENT PERIOD3.4.1 Frequency of Maintenance3.4.2 Promotion of Plant Growth and Vigor3.4.3 Planter Bed Maintenance3.4.3.1 Shrub Selective
7、 Maintenance3.4.3.2 Tree Maintenance3.4.4 Slope Erosion Control Maintenance3.4.5 Removal of Dying or Dead Plants3.4.6 Tracking of Unhealthy Plants3.4.7 Final Inspection3.4.7.1 Total Plants on Site3.4.7.2 Mulching and Weeding3.4.7.3 Tree Supports3.4.7.4 Remedial Work3.4.8 Unsatisfactory Work3.5 FIELD
8、 QUALITY CONTROL3.5.1 Maintenance Inspection Report3.5.2 Plant Quantities3.5.3 Tree Staking and Guying Removal- End of Section Table of Contents -SECTION 32 05 33 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA U
9、FGS-32 05 33 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-32 05 33 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 32 05 33LANDSCAPE ESTABLISHMENT02/10*NOTE: This guide specification covers the requirements for plant mate
10、rial and irrigation during the establishment period.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective
11、project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of Technical Proponents, including their organization designation and telephone number, is on the Internet.R
12、ecommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in t
13、his paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update t
14、he issue dates.SECTION 32 05 33 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish
15、print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM D 2103 (2008) Standard Specification for Polyethylene Film and SheetingASTM D 5851 (19
16、95; R 2006) Planning and Implementing a Water Monitoring ProgramASTM D 6155 (2006) Nontraditional Coarse Aggregate for Bituminous Paving MixturesTREE CARE INDUSTRY ASSOCIATION (TCIA)TCIA Z133.1 (2006) American National Standard for Arboricultural Operations - Pruning, Repairing, Maintaining, and Rem
17、oving Trees, and Cutting Brush - Safety RequirementsU.S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)1.2 DEFINITIONS1.2.1 PesticideAny substance or mixture of substances, including biol
18、ogical control agents, that may prevent, destroy, repel, or mitigate pests and are specifically labeled for use by the U.S. Environmental Protection Agency (EPA). Also, any substance used as a plant regulator, defoliant, disinfectant, or biocide. Examples of pesticides include fumigants, herbicides,
19、 insecticides, fungicides, nematicides, molluscicides and rodenticides.1.2.2 Stand of Turf100 95 percent ground cover of the established species.1.2.3 Planter BedsA planter bed is defined as an area containing one or a combination of the following plant types: shrubs, vines, wildflowers, annuals, pe
20、rennials, ground cover, and a mulch topdressing excluding turf. Trees may also be found in planter beds.SECTION 32 05 33 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.3 RELATED REQUIREMENTSSection 32 84 24 IRRIGATION SPRINKLER SYSTEM applie
21、s to this section for installation of irrigation equipment requirements, with additions and modifications herein.Section 32 92 19 SEEDINGSection 32 92 23 SODDINGSection 32 92 26 SPRIGGING applies to this section for installation of seedsodsprigging requirements, with additions and modifications here
22、in.Section 32 93 00 EXTERIOR PLANTS applies to this section for installation of trees, shrubs, ground cover, vines, and wildflower, with additions and modifications herein.Section 32 96 00 TRANSPLANTING EXTERIOR PLANTS applies to this section for transplanting of trees, shrubs, ground cover, vines,
23、and wildflower, with additions and modifications herein.1.4 SUBMITTALS*NOTE: Submittals must be limited to those necessary for adequate quality control. The importance of an item in the project should be one of the primary factors in determining if a submittal for the item should be required.A “G” f
24、ollowing a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is
25、sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resid
26、ent Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy projects.Su
27、bmittal items not designated with a “G“ are considered as being for information only for Army projects and for Contractor Quality Control approval for Navy projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Qual
28、ity Control SECTION 32 05 33 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. The foll
29、owing shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-01 Preconstruction SubmittalsIntegrated Pest Management Plan; G, _SD-03 Product Data Local/Regional Materials; (LEED)Submit documentation indicating distance between manufacturing facility and the project site. Indi
30、cate distance of raw material origin from the project site. Indicate relative dollar value of local/regional materials to total dollar value of products included in project.Fertilizer; G, _Hose; (LEED)Mulches Topdressing; (LEED)Submit documentation indicating percentage of post-industrial and post-c
31、onsumer recycled content per unit of product. Indicate relative dollar value of recycled content products to total dollar value of products included in project. Organic Mulch MaterialsSubmit documentation indicating type of biobased material in product and biobased content. Indicate relative dollar
32、value of biobased content products to total dollar value of products included in project.SD-07 CertificatesMaintenance inspection report Plant quantities; G, _SD-10 Operation and Maintenance DataMaintenanceSD-11 Closeout SubmittalsTree, staking and guying removal1.5 DELIVERY, STORAGE AND HANDLING1.5
33、.1 DeliveryDeliver fertilizer, gypsum, iron to the site in original containers bearing manufacturers chemical analysis, name, trade name, or trademark, and indication of conformance to state and federal laws. Instead of containers, fertilizer, gypsum may be furnished in bulk with a certificate indic
34、ating the above information.SECTION 32 05 33 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.5.2 Storage1.5.2.1 Fertilizer, Lime, Iron, Mulch StorageMaterial shall be stored in designated areas. Lime and fertilizer shall be stored in cool, dr
35、y locations away from contaminants.1.5.2.2 Antidessicants StorageDo not store with fertilizers or other landscape maintenance materials.1.5.3 HandlingDo not drop or dump materials from vehicles.1.6 SUSTAINABLE DESIGN REQUIREMENTS1.6.1 Local/Regional Materials*NOTE: Using local materials can help min
36、imize transportation impacts, including fossil fuel consumption, air pollution, and labor. Using materials harvested and manufactured within a 500 mile radius from the project site contributes to the following LEED credit: MR5. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second opti
37、on if Contractor is choosing local materials in accordance with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second option for USACE projects. Army projects shall include option only if pursuing this LEED credit.*Use materials or products extracted, harvested, or recovered, as well as manufactured,
38、within a 800_ kilometer 500_ mile radius from the project site, if available from a minimum of three sources.See Section 01 33 29 LEED(tm) DOCUMENTATION for cumulative total local material requirements. Landscaping materials may be locally available.1.7 MAINTENANCESubmit Operation and Maintenance (O
39、 promotion of growth, including fertilizing, pruning, and mowing; and integrated pest management. O Remove dead, damaged or diseased branches or limbs; where shrub growth obstructs pedestrian walkways; where shrub growth is found growing against or over structures; where shrub growth permits conceal
40、ment of unauthorized persons. All pruning debris shall be disposed of in a proper manner.3.4.3.2 Tree MaintenanceTree maintenance shall include adjustment of stakes, ties, guy supports and turnbuckles, watering, fertilizing, pest control, mulching, pruning for health and safety and fall leaf cleanup
41、. Fertilize exterior trees to promote healthy plant growth without encouraging excessive top foliar growth. Stakes, ties, guy supports and turnbuckles shall be inspected and adjusted to avoid girdling and promote natural development. All trees within the project boundaries, regardless of caliper, sh
42、all be selectively pruned for safety and health reasons. These include but are not limited to removal of dead and broken branches and correction of structural defects. Prune trees according to their natural growth characteristics leaving trees well shaped and balanced. Pruning of all trees including
43、 palm trees shall be accomplished by or in the presence of a certified member of the International Society of Arboriculture and in accordance with TCIA Z133.1. All pruning debris generated shall be disposed of in a proper manner.3.4.4 Slope Erosion Control MaintenanceThe Contractor shall provide slo
44、pe erosion control maintenance to prevent undermining of all slopes in newly landscaped and natural growth areas. Maintenance tasks include immediate repairs to weak spots in sloped areas, and maintaining clean, clear culverts, and graded SECTION 32 05 33 Page 16Provided by IHSNot for ResaleNo repro
45、duction or networking permitted without license from IHS-,-,-berms, and terraces to intercept and direct water flow to prevent development of large gullies and slope erosion and during periods of extended rainfall, irrigation systems shall be secured. Eroded areas shall be filled with amended topsoil and replanted with the same plant species. Erosion control netting blankets damaged du
