NBN 835-1970 1875 《移动片 品名》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3219-1988 Aerospace Series Heat Resisting Nickel Base Alloy (Ni-P101HT) Cold Worked and Softened Bar and Wire for Continuous Forging or Extrusion for Fasteners 3 Less Thu.pdf

AECMA PREN 3220-1988 Aerospace Series Heat Resisting Nickel Base Alloy (Ni-P101HT) Cold Worked and Softened Bar and Wire for Continuous Forging or Extrusion for Fasteners 3 Less Thu.pdf

AECMA PREN 3225-1-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 1 - General Requir.pdf

AECMA PREN 3225-2-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 2 - Atomized Powde.pdf

AECMA PREN 3225-3-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 3 - Hot Compacted .pdf

AECMA PREN 3225-4-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 4 - Pre-Production.pdf

AECMA PREN 3226-1992 Aerospace Series Nuts Hexagon Plain Normal Height Normal Across Flats in Steel Cadmium Plated Classification 1 100 MPa (at Ambient Temperature) 235 Degrees Ce.pdf

AECMA PREN 3227-1992 Aerospace Series Nuts Hexagon Plain Normal Height Normal Across Flats in Steel Cadmium Plated Left Hand Thread Classification 1 100 MPa (at Ambient Temperature.pdf

AECMA PREN 3228-1992 Aerospace Series Nuts Hexagon Plain Reduced Height Normal Across Flats in Steel Cadmium Plated Classification 900 MPa (at Ambient Temperature) 235 Degrees Cel.pdf