NBN C 03-501 1875 《示意图，曲线图和表格 第1部分：特性和分类》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 12727.4-2016 无损检测仪器 试样 第4部分：磁粉检测用试样.pdf

JB T 12727.5-2016 无损检测仪器 试样 第5部分：渗透检测试样.pdf

JB T 12732-2016 再制造内燃机 发电机工艺规范.pdf

JB T 12733-2016 再制造内燃机 飞轮工艺规范.pdf

JB T 12734-2016 再制造内燃机 连杆工艺规范.pdf

JB T 12735-2016 再制造内燃机 零部件表面修复工艺规范.pdf

JB T 12736-2016 再制造内燃机 喷油泵总成工艺规范.pdf

JB T 12737-2016 再制造内燃机 喷油器总成工艺规范.pdf

JB T 12738-2016 再制造内燃机 气缸套工艺规范.pdf