NBN C 23-001-1975 1250 《潜存爆炸性气体用电器 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 14670-2005 en Surface active agents - Sodium dodecyl sulfate - Analytical method《表面活性剂 十二烷基硫酸钠 分析方法》.pdf

EN 14671-2006 en Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol l potassium chloride《淤泥特性 用2mol l氯化钾测定可萃取氨的预处理》.pdf

EN 14672-2005 en Characterization of sludges - Determination of total phosphorus《污泥的表征 磷总含量的测定》.pdf

EN 14673-2006 en Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (Incorporates Amen.pdf

EN 14675-2015 en Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in th.pdf

EN 14677-2008 en Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel《机械安全 次等钢标记 液态钢的处理用机械和设备》.pdf

EN 14678-1-2013 en LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1 Dispensers《液化石油气设备及配件 汽车加气站的液化石油气设备的结构和性能 .pdf

EN 14678-2-2007 en LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2 Components other than dispensers and insta.pdf

EN 14678-3-2013 en LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3 Refuelling installations at commercial and.pdf