NBN C 71-400-1990 8125 Lamp caps and holders Landholders for tubular fluorescent lamps and starterholders n《灯口和灯座 管状荧光灯的灯座和启辉器支架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 13586-2012 Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach《塑料 断裂韧性(GIC与KIC)的测定 线性弹性破坏力学(LEFM)接近法》.pdf

KS M ISO 13738-2012 Lubricants industrial oils and related products (class L)-Family E(Internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils(cat.pdf

KS M ISO 13758-2008 Liquefied petroleum gases－Assessment of the dryness of propane－Valve freeze method《液化石油气 丙烷干燥度的评定 真空冻结法》.pdf

KS M ISO 13773-2007 Rubber－Polychloroprene latex－Determination of alkalinity《氯丁二烯橡胶胶乳碱度的测定》.pdf

KS M ISO 13774-2009 Rubber and plastics hoses for fuels for internal-combustion engines－Method of test for flammability《内燃机燃料用橡胶和塑料软管 易燃性试验方法》.pdf

KS M ISO 13846-2012 Plastics piping systems-End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping-Test method for long-term leaktightne.pdf

KS M ISO 13885-1-2012 Binders for paints and varnishes－ Gel permeation chromatography(GPC)－ Part 1：Tetrahydrofuran(THF) as eluent《涂料和清漆用胶粘剂 凝胶渗透色谱法(GPC) 第1部分 用四氢呋喃作洗脱溶剂》.pdf

KS M ISO 1402-2012 Rubber and plastics hoses and hose assemblies－Hydrostatic testing《橡胶和塑料软管及软管组件液压静力试验》.pdf

KS M ISO 1407-2012 Rubber－Determination of solvent extract《橡胶 溶剂萃液的测定》.pdf