NBN C 71-922 ADD 2-1992 4375 《放电灯镇流器（不包括管状荧光灯）一般指示和安全指示》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B796-2002 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P F) Applications《低合金粉末锻钢部件的非金属杂质含量的标准测试方法》.pdf

ASTM B796-2007 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications《粉末锻造(PF)用非金属杂质含量的测定用标准试验方法》.pdf

ASTM B796-2014 Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging &40 PF&41 Applications《粉末锻造 (PF) 部件铁基粉末的非金属杂质含量的标准试验方法》.pdf

ASTM B797-1993(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P F) Steel Parts《粉末锻钢部件中表面指状氧化物穿.pdf

ASTM B797-2015 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts《粉末锻 (PF) 钢部件中表面指状氧化物穿透.pdf

ASTM B798-1995(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography《用凝胶体电谱法测定金属基物上金或钯涂层孔隙度的标准试验方法》.pdf

ASTM B798-1995(2009) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography《凝胶体电谱法测定金属基物上金或钯涂层孔隙度的标准试验方法》.pdf

ASTM B798-1995(2014) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography《用凝胶体电谱法测定金属基物上金或钯涂层孔隙度的标准试验方法》.pdf

ASTM B799-1995(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid Sulfur-Dioxide Vapor《用亚硫酸 SO2蒸汽测试金和钯镀层孔隙度的标准试验方法》.pdf