NBN C 77-003-1992 2500 《关于用来与电信网相连接的仪器的特殊安全规定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M98P3-A-2008 SUN VISOR TO BE USED WITH FORD WSS-M99P1111-A 《遮光板 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M98P3-B FORD WSS-M98P3-B］》.pdf

FORD WSK-M98P4-A-1990 FUEL LINE POLYAMIDE (PA) 11 12《聚酰胺（PA）11 12燃料管路》.pdf

FORD WSK-M98P5-A-2011 FINISHED PARTS PLASTICS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部塑料制成零件 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M2P188-A1 福特WSS-M2P188-A1 福特WSS-M2P188-A1 福.pdf

FORD WSK-M98P6-A-2008 FINISHED PARTS PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用塑料用终饰部件 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M1P83-C2 FORD WSS-M1P83-C2 FORD.pdf

FORD WSK-M98P7-A-1993 PLASTIC BUMPER RIGID《刚性塑料保险杠》.pdf

FORD WSK-M98P8-A1-2012 FLOCK SPRAYED FINISHED PARTS LOW SUNLIGHT WSK-M98P8-A1 EXPOSURE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M98P8-A2-2012 FLOCK SPRAYED FINISHED PARTS MEDIUM SUNLIGHT EXPOSURE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M98P8-A1).pdf

FORD WSK-M98P8-A3-2012 FLOCK SPRAYED FINISHED PARTS HIGH SUNLIGHT EXPOSURE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M98P8-A1).pdf

FORD WSK-M98P9-A-2011 FINISHED PARTS PLASTICS NON-DECORATIVE TO BE USED WITH FORD WSS-M99P1111-A 《非装饰性塑料制成零件 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M15P50-B]》.pdf