NBN E 27-103-1974 0000 《钢板螺钉和攻丝螺钉 钢板螺钉的螺纹和尖端》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

YY T 0810.1-2010 外科植入物 全膝关节假体 第1部分：胫骨托疲劳性能的测定.pdf

YY T 0811-2010 外科植入物用大剂量辐射交联超高分子量聚乙烯制品标准要求.pdf

YY T 0812-2010 外科植入物 金属缆线和缆索.pdf

YY T 0813-2010 交联超高分子量聚乙烯(UHMWPE)分子网状结构参数的原位测定标准方法.pdf

YY T 0814-2010 红外光谱法评价外科植入物用辐射后超高分子量聚乙烯制品中反式亚乙烯基含量的标准测试方法.pdf

YY T 0815-2010 差示扫描量热法测定超高分子量聚乙烯熔化焓、结晶度和熔点.pdf

YY T 0816-2010 外科植入物缝合及其他外科用柔性金属丝.pdf

YY T 0817-2010 带定位球囊的肠营养导管物理性能要求及试验方法.pdf

YY T 0818.1-2010 医用有机硅弹性体、凝胶、泡沫标准指南 第1部分：组成和未固化材料.pdf